.204 ruger factory ammo

Discuss all aspects of Ammunition and Reloading here.
Post Reply
dantheman

.204 ruger factory ammo

Post by dantheman »

hi all, just wondering if anyone has had a good result from a particular 'factory' brand of ammo in 204 ruger. I have been using winchester supreme in 32g silvertip and have been happy with the brand, but my dealer tells me winchester brand is very hard to get at the moment and don't know if this is b/s or if he is trying to flog me another brand. Just looking for something under the 40g mark, my rifle is a standard 1.12 twist. At this point won't be reloading ammo for sometime.
Regards, Dan
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: .204 ruger factory ammo

Post by andrewk »

hi dan, when i first got my 204 i bought cheap winchester with the idea to reload after it was gone. i think it was 34 grain moly (black coated) hollow points. they shot really well, half inch groups and they actually made my hand loads look average to start with. the only other factory stuff i've shot is hornady 32gr vmax with great results.

i think the 204 in general has hit the market as a very accurate round.
dantheman

Re: .204 ruger factory ammo

Post by dantheman »

andrewk wrote:hi dan, when i first got my 204 i bought cheap winchester with the idea to reload after it was gone. i think it was 34 grain moly (black coated) hollow points. they shot really well, half inch groups and they actually made my hand loads look average to start with. the only other factory stuff i've shot is hornady 32gr vmax with great results.

i think the 204 in general has hit the market as a very accurate round.
hi andrew, thanks for the reply. i also are very happy with the accuracy i get from these ballistic tips hence my disappointment not being able to get some more. they shoot real well through my ruger. thanks for the info.
regards, dan.
Attachments
DSCN0622.JPG - resize target.jpg
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: .204 ruger factory ammo

Post by andrewk »

woh, very nice little cluster :D

but 2 short of a real group :P

i think that 204's by nature are just accurate. i haven't heard of one that won't shoot factory ammo well.

shooting bullet weights above its twist rate is another thing altogether though.
User avatar
native hunter
.270 Winchester
Posts: 1435
Joined: Mon Jul 10, 2006 1:07 pm
Favourite Cartridge: .22lr
Location: Ballina

Re: .204 ruger factory ammo

Post by native hunter »

I have a mate that tried some winchester 34 grn .204 moly coate factory ammo in his CZ527 last wednesday at the range and they were terrible ,grouped around 2 inches or more.
Suprisingly though it shot my 40grn hornady reloads to 3/4 inch, despite a 1 in 12 TR.
Regards
native
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: .204 ruger factory ammo

Post by trevort »

factory hornady 40 and 32 grouped like a shotgun pattern in my VT. I wont try any factory in my current 204
louie the fly
.17 HMR
Posts: 210
Joined: Sun Aug 24, 2008 11:49 pm
Favourite Cartridge: 25-06
Location: WA

Re: .204 ruger factory ammo

Post by louie the fly »

the federal 39 SBK shoots quite well in my tikka when i was using factory ammo...5 shots around .75''

the hornady 32gr shoots well. And with the Hornady you get the extra velocity 4,200fps....well thats what they say at Hornady anyway. :lol:
Lix
New Member
Posts: 9
Joined: Tue Jul 21, 2009 4:15 pm
Favourite Cartridge: .204
Location: Hobart

Re: .204 ruger factory ammo

Post by Lix »

Out of my SPS the Winchester 34gr hollow points (lubalox I think) shoot 5 shot groups all touching at 100m, actually I have done a 10 shot group doing this as well. Cost is the only reason to reload with this kind of performance.

Anything 40gr key holes into the target and groups about 6". The 32gr Vmax things group about 1".

Alex
feralbuster
17 Hornet
Posts: 299
Joined: Tue Dec 04, 2007 8:18 pm
Location: Roseworthy SA

Re: .204 ruger factory ammo

Post by feralbuster »

Lix wrote:
Anything 40gr key holes into the target and groups about 6". The 32gr Vmax things group about 1".

Alex
Maybe the twist rate plays more a part in most 204's?
I had a 1:10 twist put on my 204 (rather than the standard factory 1:12) on Jimbo's suggestion, and it doesn't really like anything under 39 grains. (Which is fine by me as i only like to have 1/2 loads for each of my rifles)
dantheman

Re: .204 ruger factory ammo

Post by dantheman »

hi guys, thanks for all your input really happy with the 204 in general and I've since bought some of the fed 39gr blitz kings and they shoot very well and hit harder than the 32gr. when the wind settles here i'll let ya know how they go on paper the only thing is i just about fell over when i found out the price $43 per 20, this is pretty much average for all brands also felt sorry for a fellow that bought a box of 45/70's paid $90 for 20. regards, dan
JG79
New Member
Posts: 5
Joined: Tue Feb 02, 2010 6:47 pm
Favourite Cartridge: 223
Location: Hunter Valley, NSW

Re: .204 ruger factory ammo

Post by JG79 »

I'm currently waiting for my Ruger Predator to show up in .204, bought 100 rounds of the federal 39's, good to hear they shoot alright :) Will reload 39's afterwards I think as well. I see a heap of handload figures for these getting around, I'll see what this rifle prefers with some testing.

JG
dantheman

Re: .204 ruger factory ammo

Post by dantheman »

JG79 wrote:I'm currently waiting for my Ruger Predator to show up in .204, bought 100 rounds of the federal 39's, good to hear they shoot alright :) Will reload 39's afterwards I think as well. I see a heap of handload figures for these getting around, I'll see what this rifle prefers with some testing.

JG
good stuff there mate, i'm sure you will be more than happy with your new ruger, as i'm with mine, let us know how you go with your reloads. cheers, dan :)
gigitt
.17 HMR
Posts: 178
Joined: Wed Aug 29, 2007 2:11 pm
Favourite Cartridge: 204 Ruger
Location: NSW

Re: .204 ruger factory ammo

Post by gigitt »

Federal 39gn Blitzkings shoot very well in my Tikka T3.

Then again I have not shot anything else... as all the reading I did before the gun purchase pointed to the 39gn as the better all round flat shooting bullet.

Lucky for me I purchased 200 Federal rounds before the price hike moved then over the $40 mark.

I now reload the shells and sticking with the 39gn BKs.

easy head shots 200-300m :)
Post Reply