Digital Calipers/ Verniers

Discuss all aspects of Ammunition and Reloading here.
User avatar
GriMo
Site Admin
Posts: 1033
Joined: Wed Jul 19, 2006 6:36 pm
Favourite Cartridge: 17 rem
Contact:

Digital Calipers/ Verniers

Post by GriMo »

Well, seems between keith and i we have misplaced our last set so i stopped by jaycar on the way home and grabbed myself a new set. Accurate down to .01mm ( 4 places after the . if were talking inches), and feels very solid and nicely made. If anyone is in the market for one it set me back about $40
User avatar
Knackers
.338 Lapua Magnum
Posts: 2381
Joined: Sun Aug 06, 2006 9:22 pm
Favourite Cartridge: .223
Location: Riverina NSW

Re: Digital Calipers/ Verniers

Post by Knackers »

and they work perfectly and are very repeatable and accurate, their good value Grimo, thats a bit cheaper than what I paid a couple of years ago. :wink:
Ron Goulding
.223 Remington
Posts: 400
Joined: Fri Mar 21, 2008 1:51 pm
Favourite Cartridge: .22lr
Location: Syd

Re: Digital Calipers/ Verniers

Post by Ron Goulding »

Thanks for the heads up GriMo, ill stop pass and grab a set at that price. I went to Bunnings thinking that id get some in that price range but there cheapest set was $90. Cheers Ron
User avatar
bimbo
300 Win Mag
Posts: 1791
Joined: Tue Oct 10, 2006 10:34 pm
Favourite Cartridge: 17HH
Location: Newcastle, NSW

Re: Digital Calipers/ Verniers

Post by bimbo »

I picked up a set of digital ones from gasweld a year or so back for about the same money and they have been great so far not sure what the brand is but I think Toolies has them as well and they looked exactly the same so probably some generic brand that gets rebranded.
I have also checked mine quickly against a set we have at work which are calibrated every few years and it was pretty close to them
surferdoc26
New Member
Posts: 7
Joined: Thu Jul 17, 2008 10:12 pm
Favourite Cartridge: N/A
Location: Sydney, NSW

Re: Digital Calipers/ Verniers

Post by surferdoc26 »

Hi I'm a new member of this forum and just starting to purchase bits and pieces to start reloading my own ammo. I only have one centerfire rifle a .243 Win tikka varmint . Thanks for the info regarding the digital caliper i ordered one online from jaycar electronics and they are cheaper than going in the store $31.55 including insurance whereas the same one sells for $40 in the store.

Have anybody tried those digital scales available in ebay? they are being marketed for jewellers but i guess it can be use for reloading as well because they have grains in one of the units. I have my Lee scale but I think I need a second one just to confirm my measurement.Thanks
Rick1970
.17 HMR
Posts: 166
Joined: Sat Nov 18, 2006 4:43 pm
Favourite Cartridge: 17 Remington
Location: Tamworth, NSW

Re: Digital Calipers/ Verniers

Post by Rick1970 »

I have some sleezebay special digital scales, but i do all my powder measurement on an old set of Lyman beam scales if thats any indication :mrgreen:
User avatar
GriMo
Site Admin
Posts: 1033
Joined: Wed Jul 19, 2006 6:36 pm
Favourite Cartridge: 17 rem
Contact:

Re: Digital Calipers/ Verniers

Post by GriMo »

The name escapes me at present but i know one of the guys on the board purchased a set of the ebay scales. Using some check weights they were pretty accurate.

Will try find the thread

Found it. It was 300RUM and he even included a link to the scales. Thread can be found here
ogre6br
300 Win Mag
Posts: 1781
Joined: Wed Sep 13, 2006 4:35 pm
Favourite Cartridge: 6.5x55 or 6BR
Location: Melbourne Vic

Re: Digital Calipers/ Verniers

Post by ogre6br »

How accurate in use have you found the calipers so far

do they have on the beam the actual measurements as well so if the battery dies you can use them manually or is it just the digital read out?

P
User avatar
GriMo
Site Admin
Posts: 1033
Joined: Wed Jul 19, 2006 6:36 pm
Favourite Cartridge: 17 rem
Contact:

Re: Digital Calipers/ Verniers

Post by GriMo »

Havent had a chance for much actual use as yet but measuring the known diameters of things around the house, and also measuring some rounds i know the length of it has been proven to be reliable,. repeatable and atleast as accurate as my loading practices.

As for the measurements on the side it hassome, but couldnt be used as a vernier. More of a ruler if you have no batteries. But hey, this is the digital age, and i prefer the convenience of a digital screen then trying to figure out dials etc. the exception to that being watches/clocks.
User avatar
V|PeR
.22 WMR
Posts: 124
Joined: Sun Jan 20, 2008 11:04 pm
Favourite Cartridge: .22
Location: Perth WA

Re: Digital Calipers/ Verniers

Post by V|PeR »

http://www.jaycar.com.au/productView.as ... rm=KEYWORD" onclick="window.open(this.href);return false;

are they the ones?
User avatar
GriMo
Site Admin
Posts: 1033
Joined: Wed Jul 19, 2006 6:36 pm
Favourite Cartridge: 17 rem
Contact:

Re: Digital Calipers/ Verniers

Post by GriMo »

That be them
Trev
.223 Remington
Posts: 418
Joined: Sat Oct 18, 2008 2:41 am
Favourite Cartridge: 270wsm

Re: Digital Calipers/ Verniers

Post by Trev »

If you guys have a good look at your Digital Verniers, then go into places like Total Tools, All Tools Aand any other shop, you will see they are exactly the same. I reckon its like most things, all made in China on the same factory floor, and just get stuck in a different box. I bought two pairs from ALDI, $12:95, I compared em to the micrometers I use for my engines and guess what, they read within a thou, and my engine stuff is Mitutoyo AND COST TEN TIMES AS MUCH.

Stick with the cheap stuff, its great.
Rick1970
.17 HMR
Posts: 166
Joined: Sat Nov 18, 2006 4:43 pm
Favourite Cartridge: 17 Remington
Location: Tamworth, NSW

Re: Digital Calipers/ Verniers

Post by Rick1970 »

I'm a bit the other way with the digital calipers. After being less than impressed with the cheapies accuracy, and expecially their ability to hold a constant zero, was quite happy to fork out $200 for some Mitutoyos.
User avatar
albow
.257 Roberts
Posts: 787
Joined: Fri Oct 20, 2006 7:40 am
Location: Nth Queensland

Re: Digital Calipers/ Verniers

Post by albow »

I have experience in both the verniers and scales :)

I am like Rick on this and started out with a cheap pair that were very inconsistent in holding their zero which was a bit frustrating when batching projectiles so I kept an eye out on ebay for a set of mitutoyo's and got an 8" set for $75 US secondhand that were immaculate :wink:

Another good set that I borrowed were a set of Kinchrome and depending on what you are measuring eg batching large numbers of projectiles I would suggest getting an 8" set as they are more comfy to use for long periods.... atleast in my big oaf hands :D :D

As far as scales off ebay they are OK for batching brass or projectiles but i found that when you trickle up powder they powered off becuase the weight was not moving fast enough :?
badger74

Re: Digital Calipers/ Verniers

Post by badger74 »

Yep, Thats why I prefer the old school dial calipers. You know that they are working, and no problems with zero reset/batteries etc.
Same thing with power tools. For cordless you cant go past a good brand, the batteries are what you are paying for.
However for plug in 240v tools, I just cant stop buying cheepr Ozito or GMC. 2 year replacement guarantee, cant go wrong.
Post Reply