Most important Relaod Info??
Most important Relaod Info??
s
Last edited by a.JR on Mon Mar 16, 2009 4:22 pm, edited 1 time in total.
-
Kenny
- 6mm Remington
- Posts: 717
- Joined: Wed Jul 26, 2006 12:55 pm
- Favourite Cartridge: 6mmPPC
- Location: In the Doghouse
Re: Most important Relaod Info??
aJR,
Same as you....
Usually before a serious comp I load the same load as used last time for whatever barrells/class the comp will be and hang for a reasonably calm day to test the loads......apart from chasing lands or making new shells and fireforming if needed there's usually not much that changes. Just my headspace on the day
It might be a month before the comp or as happened once...the night before
......jeez never let a nice day get away 
Oh and a 7mm update......I got meself a lathe last week..woo hooo....so if the threading tips turn up and I can bludge a reamer holder off of somebody
there will be a tube gun going off at my joint Monday....finally
KY
Same as you....
Usually before a serious comp I load the same load as used last time for whatever barrells/class the comp will be and hang for a reasonably calm day to test the loads......apart from chasing lands or making new shells and fireforming if needed there's usually not much that changes. Just my headspace on the day
It might be a month before the comp or as happened once...the night before
......jeez never let a nice day get away Oh and a 7mm update......I got meself a lathe last week..woo hooo....so if the threading tips turn up and I can bludge a reamer holder off of somebody
there will be a tube gun going off at my joint Monday....finallyKY