re-barreling and new stock

Talk about your Varmint Rifles and other firearms here!
Post Reply
_boingk

re-barreling and new stock

Post by _boingk »

hi guys, i have a ruger M77 MKII varmint in .22/250, and have just about worn the barrel out, so i'm thinking about getting it re-barreled to .243 by MAB barrels (now TSE engineering) any thoughts on this? Also i'd like to get a new stock on it, there doesn't seem to be much choice for ruger m77 but i like the boyds, although i would preffer if i could get one without the thumbhole and i can't seem to find one anywhere
The Kiwi

Re: re-barreling and new stock

Post by The Kiwi »

Have a look here, they are happy to ship to AU, unlike a lot of other manufacturers, there is a large range of thumbhole stocks, both solid and laminated and the prices are good,

http://www.rifle-stocks.com/sporter_hunting_styles.htm
User avatar
stewiemc
17 Hornet
Posts: 290
Joined: Wed Jan 10, 2007 8:23 am
Favourite Cartridge: 22/250
Location: Albury, NSW

Re: re-barreling and new stock

Post by stewiemc »

[quote="_boingk"]hi guys, i have a ruger M77 MKII varmint in .22/250, and have just about worn the barrel out,

I've got one also - how many rounds do you reckon you've put through it?
Brad Y
.338 Lapua Magnum
Posts: 3256
Joined: Wed Sep 26, 2007 10:47 pm
Favourite Cartridge: N/A
Location: Im here...

Re: re-barreling and new stock

Post by Brad Y »

Ive been told to go for a better barrel by a few people, maybe look at a lilja or even a maddco barrel. MAB make nice barrels but apparently these others are nicer.

As for a stock, what about doing a slee stock up? Great stocks when they are finished up nicely
_boingk

Re: re-barreling and new stock

Post by _boingk »

http://www.rifle-stocks.com/sporter_hunting_styles.htm[/quote]

thanks, i checked out this site and it was just what i was looking for! prices are good as well
_boingk

Re: re-barreling and new stock

Post by _boingk »

I've got one also - how many rounds do you reckon you've put through it?[/quote]

um... i've put about 2500 rounds through it, a few factory but mostly hot handloads, mostly 37.2 gns of AR2208 behind a 52gn nosler HPBT. With these loads it used to get under .5" every time but 5 shot groups are now erratic... occasionally i will get a good group but not often.
User avatar
Model70
25/06 Remington
Posts: 849
Joined: Mon May 21, 2007 6:22 pm
Location: Heathcote NSW

Re: re-barreling and new stock

Post by Model70 »

_boingk wrote:I've got one also - how many rounds do you reckon you've put through it?
um... i've put about 2500 rounds through it, a few factory but mostly hot handloads, mostly 37.2 gns of AR2208 behind a 52gn nosler HPBT. With these loads it used to get under .5" every time but 5 shot groups are now erratic... occasionally i will get a good group but not often.[/quote]
Wow that is hot!! I run 36.6 x 2208 behind a 55gn V Max, my -250 is also due for a re-barrel as my groups have blown out to an inch. Rob Tobler had a look and said its on its way though not completely totalled so I have around 200 rounds of crap to punch through it which should see her out.
Rinso
.338 Lapua Magnum
Posts: 2055
Joined: Thu Jul 27, 2006 11:09 pm
Favourite Cartridge: 25.06
Location: Hervey Bay Qld

Re: re-barreling and new stock

Post by Rinso »

thanks, i checked out this site and it was just what i was looking for! prices are good as well[/quote]

Yep Richards Micro Fit are a nice stock and well priced .. you can expect a 6 - 12 month wait for it unfortunately. So unless you are prepared to sit on your hands for a year I would suggest you look elsewhere.

cheers
Rinso
User avatar
blowemup
.22 WMR
Posts: 129
Joined: Mon Jul 07, 2008 10:00 am
Favourite Cartridge: 6.5x47

Re: re-barreling and new stock

Post by blowemup »

_boingk wrote:hi guys, i have a ruger M77 MKII varmint in .22/250, and have just about worn the barrel out, so i'm thinking about getting it re-barreled to .243 by MAB barrels (now TSE engineering) any thoughts on this? Also i'd like to get a new stock on it, there doesn't seem to be much choice for ruger m77 but i like the boyds, although i would preffer if i could get one without the thumbhole and i can't seem to find one anywhere
I would have a good look at re-barreling it to a 6mm br as you already handload & there is quality brass available.
250-3000
New Member
Posts: 45
Joined: Mon Aug 04, 2008 12:12 am
Favourite Cartridge: 250-3000
Location: Newcastle

Re: re-barreling and new stock

Post by 250-3000 »

why not go up to the father of the 22-250 the 250 savage
Post Reply