Australian shooter gun doctor.??

Post Reply
User avatar
native hunter
.270 Winchester
Posts: 1435
Joined: Mon Jul 10, 2006 1:07 pm
Favourite Cartridge: .22lr
Location: Ballina

Australian shooter gun doctor.??

Post by native hunter »

G"day All
Anyone have the pleasure of reading the Q&A section in the gun doctor this month.?
This bloke has no idea on air rifles, scopes or pellets.
About time this mag got its own air arms technical section.
Lewis you would be a prime candidate as would harry.
I always wondered why lewis never advertises anywhere and after this you can see why, it would only attract stupid questions and take up way to much time.
Geeez it will be good when we have access to JSB pellets.!! :lol: :lol: :lol: :lol: :lol:
Regards
Lewis Reinhold
300 Win Mag
Posts: 1825
Joined: Thu Feb 15, 2007 7:17 pm
Location: Brisbane
Contact:

Re: Australian shooter gun doctor.??

Post by Lewis Reinhold »

native hunter wrote:G"day All
Anyone have the pleasure of reading the Q&A section in the gun doctor this month.?
This bloke has no idea on air rifles, scopes or pellets.
About time this mag got its own air arms technical section.
Lewis you would be a prime candidate as would harry.
I always wondered why lewis never advertises anywhere and after this you can see why, it would only attract stupid questions and take up way to much time.
Geeez it will be good when we have access to JSB pellets.!! :lol: :lol: :lol: :lol: :lol:
Regards
Yes,exactly Damien.
Ian does phone me occasionally so his responses do surprise.
I'm not overly worried because sooner or later I get found.
I must warn everybody though,I am desperately low on JSB's.The factory has been extremely slow delivering.
I have NO Exact Express .177
SOME Exact .177,Exact Heavy .177,Exact Express .22 and Exact .22.
PLENTY of Exact .20.
I have orders in that go back to February!!!!!
Hilly
.17 HMR
Posts: 174
Joined: Wed Jun 20, 2007 5:55 pm
Location: Mid North Coast, NSW

Re: Australian shooter gun doctor.??

Post by Hilly »

And if they don't hassle poor old Lewis they come into the shop and ask me some of the most rediculous questions. Most of the time people are unaware of the diferences between an sir powered gun and a powder-burner, both in their limitations and their advantages. When they hear the price of a quality air rifle they usually go a strange grey colour and stagger out the door. The Australian shooting mags do not help (quality) airgun sales in any way. Then again, there are few advertisers of quality air powered guns in Australian magazines.
And just for your info, Lewis.
Highland Sports no longer import spare parts for the Gamo "Compact" pistols they once imported. Some parts are available, mainly the ones that never break or wear out but things like seals and O-rings are long gone.
Dennis
User avatar
RayG
22-250 Remington
Posts: 594
Joined: Thu Feb 15, 2007 8:10 pm
Favourite Cartridge: 375H&H
Location: Adelaide, S.A.

Re: Australian shooter gun doctor.??

Post by RayG »

I must warn everybody though,I am desperately low on JSB's.The factory has been extremely slow delivering.
I have NO Exact Express .177
SOME Exact .177,Exact Heavy .177,Exact Express .22 and Exact .22.
PLENTY of Exact .20.
I have orders in that go back to February!!!!![quote]

Lewis,
I have just e-mailed a pellet order to you.
Thought I would do it now or buy in a trailer full of gravel.
Ray :P :P
Lewis Reinhold
300 Win Mag
Posts: 1825
Joined: Thu Feb 15, 2007 7:17 pm
Location: Brisbane
Contact:

Re: Australian shooter gun doctor.??

Post by Lewis Reinhold »

Hilly wrote:And if they don't hassle poor old Lewis they come into the shop and ask me some of the most rediculous questions. Most of the time people are unaware of the diferences between an sir powered gun and a powder-burner, both in their limitations and their advantages. When they hear the price of a quality air rifle they usually go a strange grey colour and stagger out the door. The Australian shooting mags do not help (quality) airgun sales in any way. Then again, there are few advertisers of quality air powered guns in Australian magazines.
And just for your info, Lewis.
Highland Sports no longer import spare parts for the Gamo "Compact" pistols they once imported. Some parts are available, mainly the ones that never break or wear out but things like seals and O-rings are long gone.
Dennis
Don't think you're on your lonesome with stupid questions Dennis!
Thanks for the info on HS and the GAMO Compact.This is the other reason I do not sell,work on or trade GAMO anything.
User avatar
native hunter
.270 Winchester
Posts: 1435
Joined: Mon Jul 10, 2006 1:07 pm
Favourite Cartridge: .22lr
Location: Ballina

Re: Australian shooter gun doctor.??

Post by native hunter »

Sounds like a good policy to me Lewis.
Lewis Reinhold
300 Win Mag
Posts: 1825
Joined: Thu Feb 15, 2007 7:17 pm
Location: Brisbane
Contact:

Re: Australian shooter gun doctor.??

Post by Lewis Reinhold »

native hunter wrote:Sounds like a good policy to me Lewis.
Works for me.There's quite a few other brands I'm not fussed on either and avoid like the plague.
Hilly
.17 HMR
Posts: 174
Joined: Wed Jun 20, 2007 5:55 pm
Location: Mid North Coast, NSW

Re: Australian shooter gun doctor.??

Post by Hilly »

We got sneaky after a while. We worked out that most of the importers didn't have too many clues about airguns, they just want to sell them and make a quid. I would venture to say that there would only be 2 importers on the east coast that *really* know airguns, Lewis and Potter's.
We now work on the basis that if Lewis can fix it, we can sell it. If Lewis won't touch it, we don't need the hassles of the deal when something goes wrong. Some importers seem to think that spare parts are at best a hinderance to making a profit, hence, there are none in stock.
Lewis Reinhold
300 Win Mag
Posts: 1825
Joined: Thu Feb 15, 2007 7:17 pm
Location: Brisbane
Contact:

Re: Australian shooter gun doctor.??

Post by Lewis Reinhold »

Hilly wrote:We got sneaky after a while. We worked out that most of the importers didn't have too many clues about airguns, they just want to sell them and make a quid. I would venture to say that there would only be 2 importers on the east coast that *really* know airguns, Lewis and Potter's.
We now work on the basis that if Lewis can fix it, we can sell it. If Lewis won't touch it, we don't need the hassles of the deal when something goes wrong. Some importers seem to think that spare parts are at best a hinderance to making a profit, hence, there are none in stock.
Dennis is spot on.Airguns are 'airarms' not 'firearms'.Beware of anyone trying who keeps referring to airguns as firearms.They have no idea.
Chris L
.22 WMR
Posts: 147
Joined: Fri Feb 16, 2007 9:08 am

Re: Australian shooter gun doctor.??

Post by Chris L »

When we lived in the States and shot 3P air rifle, it was $1 in the Charity Tin if you referred to an air gun as a "firearm", and that was in a country with a gun culture!
Lewis Reinhold
300 Win Mag
Posts: 1825
Joined: Thu Feb 15, 2007 7:17 pm
Location: Brisbane
Contact:

Re: Australian shooter gun doctor.??

Post by Lewis Reinhold »

Chris L wrote:When we lived in the States and shot 3P air rifle, it was $1 in the Charity Tin if you referred to an air gun as a "firearm", and that was in a country with a gun culture!
The Charity Tin is mine!!!! LOL!
I get so cranky when I hear it and just bristle up.It is just a case of shoving a square peg in a round hole for convenience.
crowbuster

Re: Australian shooter gun doctor.??

Post by crowbuster »

Anyone have the pleasure of reading the Q&A section in the gun doctor this month.?
This bloke has no idea on air rifles, scopes or pellets.
Or much else that I have observed... :!:

I once read a question to the Dr. from a guy wanting to know if a short barrelled over & under 12 gauge shotgun was available. The reply from the alleged expert was no such animal ???

I personally own a Boito Muira shotty of that exact description and they're not rare, so how does this clown not know about them? Great gun for the money by the way.

Anyway another indicator of the poor quality of Australian Shooter Magazine.

CB
Post Reply