Projectile swap meet

Discuss all aspects of Ammunition and Reloading here.
User avatar
Model70
25/06 Remington
Posts: 849
Joined: Mon May 21, 2007 6:22 pm
Location: Heathcote NSW

Re: Projectile swap meet

Post by Model70 »

brad wrote:cheers mate !
ill get this load sorted then try them 87gn SP sierra's, but i like the blue tips !
hopefully ill be able to remove a bit of that vertical dispersion in that load !
as i said my old 25 loved em and they made the best paddock pizza, which of course is the most important thing ! :rifle:
The sierra's shot under half inch in mine, the speer 100gn hot cor shoot 3/4 inch and the V Max shot 0.353" but I couldnt for the life of me get the BT's under an inch. Same with the -250 it hated the BT's and the BK's but shoots V Max under 1/2 inch all day!
ogre6br
300 Win Mag
Posts: 1781
Joined: Wed Sep 13, 2006 4:35 pm
Favourite Cartridge: 6.5x55 or 6BR
Location: Melbourne Vic

Re: Projectile swap meet

Post by ogre6br »

trevort wrote:but I have ordered an action with a br bolt face!
but whats another action for you- you don't have enough yet.....

or you could get the action with an extra bolt and have a switch/ switch barrel setup

Later
p
User avatar
brad
.17 HMR
Posts: 210
Joined: Thu Sep 21, 2006 11:57 am
Location: brisbane

Re: Projectile swap meet

Post by brad »

Model70 wrote:
brad wrote:cheers mate !
ill get this load sorted then try them 87gn SP sierra's, but i like the blue tips !
hopefully ill be able to remove a bit of that vertical dispersion in that load !
as i said my old 25 loved em and they made the best paddock pizza, which of course is the most important thing ! :rifle:
The sierra's shot under half inch in mine, the speer 100gn hot cor shoot 3/4 inch and the V Max shot 0.353" but I couldnt for the life of me get the BT's under an inch. Same with the -250 it hated the BT's and the BK's but shoots V Max under 1/2 inch all day!
just tried some 87gn Taipan hp's, and they shot 0.3 as did the 85gn BT's and the 87gn Sierra's all to the same POI with same load ! only the taipans are $25 a packet ! :auto:
User avatar
Model70
25/06 Remington
Posts: 849
Joined: Mon May 21, 2007 6:22 pm
Location: Heathcote NSW

Re: Projectile swap meet

Post by Model70 »

Good stuff Brad! Get the Taipans while you can as I was told that there may be an indefinate interruption in manufacturing of taipan gear.
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: Projectile swap meet

Post by macca »

I have the following if anyone wants to try some.
40 x 6mm(243) 55gr Ballistic Tips -Gone
16 x 75gr .224 Hornady Amax- Gone
60 x 70gr .224 Lapua scenars -Gone
24 x 6.5mm 100gr Sierria hollow points.-Gone

Just PM your details and I'll drop them in the post.
Macca
Last edited by macca on Thu Aug 21, 2008 4:18 pm, edited 2 times in total.
ogre6br
300 Win Mag
Posts: 1781
Joined: Wed Sep 13, 2006 4:35 pm
Favourite Cartridge: 6.5x55 or 6BR
Location: Melbourne Vic

Re: Projectile swap meet

Post by ogre6br »

macca wrote:I have the following if anyone wants to try some.
60 x 70gr .224 Lapua scenars
24 x 6.5mm 100gr Sierria hollow points.

Just PM your details and I'll drop them in the post.
Macca
yes please

not all the Lapuas if someone else wants some as well

pm with addy on the way

P
250-3000
New Member
Posts: 45
Joined: Mon Aug 04, 2008 12:12 am
Favourite Cartridge: 250-3000
Location: Newcastle

Re: Projectile swap meet

Post by 250-3000 »

Ive got some of the following guys

50 .257 75grain Hornady HPs
30 257 87grain Riverbrand SPs
10 224 55grain Ballistic tips
10 308 130gr Speer HPs

Also might have some 36gr Varmint Grenades somewhere


I wouldnt mind trying 115-120gr 257cal projectiles in the 250
User avatar
brad
.17 HMR
Posts: 210
Joined: Thu Sep 21, 2006 11:57 am
Location: brisbane

Re: Projectile swap meet

Post by brad »

welcome to the dark side 250-3000 (vg) :lol:
250-3000
New Member
Posts: 45
Joined: Mon Aug 04, 2008 12:12 am
Favourite Cartridge: 250-3000
Location: Newcastle

Re: Projectile swap meet

Post by 250-3000 »

Jeez thanks brad!

I tell you what the way things are going with the 250 ATM the 22-250s not going to get much of a show


I also have some

150gr Taipan SPs in 308, that I got of Pilbara Jim on AHN for testing
User avatar
Curtley78
Political Advisor/Activist
Posts: 1170
Joined: Tue Mar 25, 2008 8:17 am
Favourite Cartridge: 7mm08 AI
Location: Helensburgh 'Dixie'

Re: Projectile swap meet

Post by Curtley78 »

First of all let me say thanks to Macca for the 70 grnr's.

I have finally cleaned out my reloading drawer after having conducted a dawn raid upon Horsley Park gun shop.

I have a dozen 35 grn V-max in .224 (these sizzle and are lethal upon vermin and varmints from a .223).

I have ten 61 grn Barnes FMJ's and a dozen Berger 70 grn VLD's.

The 61 grnrs and the 70 grnr's are no good unless you have a minimum 1 in 9 twist, although the 61 grnr's may stabilise with 1 in 10.

Anyone interested PM me and I will send them on.
ogre6br
300 Win Mag
Posts: 1781
Joined: Wed Sep 13, 2006 4:35 pm
Favourite Cartridge: 6.5x55 or 6BR
Location: Melbourne Vic

Re: Projectile swap meet

Post by ogre6br »

Sean
someone here was asking for projectiles that will work ina 1:16 hornet barrel

maybe those 35 V-max would do the trick

I dont think the request was made in this post but a seperate post

later
P
edit
I think it was aussie steve that was asking
Rick1970
.17 HMR
Posts: 166
Joined: Sat Nov 18, 2006 4:43 pm
Favourite Cartridge: 17 Remington
Location: Tamworth, NSW

Re: Projectile swap meet

Post by Rick1970 »

Can anyone spare a few old 204R case so i can try forming them to 17Rem cases?

Cheers
Rick
User avatar
Curtley78
Political Advisor/Activist
Posts: 1170
Joined: Tue Mar 25, 2008 8:17 am
Favourite Cartridge: 7mm08 AI
Location: Helensburgh 'Dixie'

Re: Projectile swap meet

Post by Curtley78 »

Oagie,

I checked the forum, it was stinkitup.

I sent him a PM and will forward them on.

Regards

Sean
User avatar
stinkitup
.338 Lapua Magnum
Posts: 3217
Joined: Fri Aug 03, 2007 10:46 am
Favourite Cartridge: 6.5x55
Location: Lower Hunter Valley

Re: Projectile swap meet

Post by stinkitup »

Yes Thanks for the PM Sean, it will be interesting to see how they go in the martini, from pictures on the web they don't look like they have a big boat tail or any boat tail which should make them pretty short and stubby. Should really make the martini Zip :D
User avatar
Curtley78
Political Advisor/Activist
Posts: 1170
Joined: Tue Mar 25, 2008 8:17 am
Favourite Cartridge: 7mm08 AI
Location: Helensburgh 'Dixie'

Re: Projectile swap meet

Post by Curtley78 »

I made the post today, so you should have them by Wednesday, Thursday the latest.

I was using 22grn of 2207 in the .223.

I have five loaded with 26 grns of BM2 that I will place over the chrony (hopefully on Friday).

I think that I may have been pushing them too hard taking into consideration that I was using 19 grns of 2207 for a 55 grn V-Max. :roll:

If your shooting Rabbits with these you wont be able to eat them unless you intend to use them for soup.
Post Reply