Townsville 1000 Aus 14/7/08

Benchrest, F-class, Metallic Silhouette, Handgun Shooting and anything other form of target shooting!
Post Reply
Tony Z
.270 Winchester
Posts: 1366
Joined: Fri Oct 27, 2006 5:29 pm

Townsville 1000 Aus 14/7/08

Post by Tony Z »

Firstly i would like to say a big thanks to all our travellers from the south, Jaegen Peet, Shane Clancy, Charles Robinson, Tim Pavey and his son Mitchell, John McQuire and Bob Mulder. I hope you guys enjoyed your time up here and hopefully learned a thing or two as we did from you. Bob and John proved that their little bangers can do OK at 1K by getting two record targets with all shots onboard on a pretty shitty day. No doubt we and other forums will be reminded of this for years :D . Well done really guys.
Charlies big 338 Lapua is going to show a lot of potential and did very well on his first outing with it for most of the weekend. It is just a stretcher tube away from being a real threat and when he gets time i am sure the tube will get fitted along with the front and rear rail setup.

For some time now i have said that i have yet to see a 6.5 worth owning. Well Jaegens' is worth owning and he took out the score agg with a well shot 91. Tim Pavey came in second with a 89 and John McQuire did an outstanding job of managing a destabilising load that had all his shots sideways but still came in third for score with a 85.
Group was won by me with a 8.555" agg, Jaegen was a little unlucky with one card but still managed a very creditable 9.657" agg for second and Bob Luther came in third with a 14.690". I stated before the match that our 1K can be a graveyard, and it certainly proved true with the LGs getting a real hammering. The remaining shooters agging well into the high teens and low 20s. High score for one card was Alan Neilson with a well deserved 46.1 and small group was myself with a 6.380"

HG was a little different with some good groups and scores shot in trying conditions. I took out the group agg with a pair of near identical groups of 7.805" agg, second was JR with a 9.325" agg and third was Charlie with a 13.010" agg. Score was me on 193.3, then JR on 189.3 and then Shane Clancy for third with a 183.
Small group was JR with a very well run 7.050" and high score for one card was me with a 99.3 that took just over nine minutes to complete.

Just a quick rundown on some gear used; Jaegen used a 6.5/284 and 142 SMKs, Shane used a 7 STW and 180 Bergers, Charlie used a 338 Lapua and 250 Scenars shot out of his new 10x2 BAT, JR and i used the usual Redneck and Bibs or 200 SMKs for me with our ailing drop port magnums. Shane and Jaegen used sleeved 700s, Alan used an Omark and 175 SMKs in his 30 JAT, Bob Luther ran his trusty sleeved 700 and 30/284 with 175 SMKs. Bob Mulder used a 30 BR with 125 CDCs out of his Barnard, John Mc used a 7x47 and 130 SMKs fired from a 300 year old Mauser that clearly just wanted to rest all the time by putting bullets through the target sideways. Tim had his well serving Rem 700 30/06 AI and 155 Amax. Bob Noakes used a 284 and 168 SMK in his sleeved 700. Chris Joscht used his 6BR and 105 Scenars out of the sleeved 700.

The after shoot autopsy is for a number of changes amongst a number of our shooters choosing to move away from the Fly/1K rifle and rest combination to pure 1K/600 rifles in different stocks and muzzle breaks fitted. Calibers will surely change as our range mods have drastically altered the range characteristics with some very different wind effects that are giving us some unusual vertical. With my new LG it will be a drop port magnum action, stretched barrel and muzzle braked 300 Redneck or Ackley with either 200 SMKs or 208 Amax. When a HG firing 10 shots can out agg the LGs for both group and score average, the choice for me after this weekend has never been clearer. My ailing old HG barrel finished the weekend with 3415 rounds through the original chambering heading into the tail end of its fith season. All the more reason to go to a big banger LG.

See you all next year. Tony Z.
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: Townsville 1000 Aus 14/7/08

Post by macca »

Sounds like a very interesting weekend.Congrats to all the shooters.
Tony that is a great life from your HG barrel.Do you run moly or have any special cleaning regieme?
Always interesting to see a mix of calibres and how they go.
Have a good one,
Macca
Tony Z
.270 Winchester
Posts: 1366
Joined: Fri Oct 27, 2006 5:29 pm

Re: Townsville 1000 Aus 14/7/08

Post by Tony Z »

Nothing special macca. No moly, haven't used it for 11 years, just clean at every 16 rounds or a maximum of two Fly targets or sighter period and ten shots at 1K. The longer neck than a stock 300 WM aswell as bullet clearance and throat angles i use on the reamers i have made over the years are probably a big contributor as is my choice of low residue and low flame temperature powders. The whole package i guess has just been low maintenance. Recrowning at every 400 rounds to keep the accuracy edge up has been the biggest chore.
My only bitch about the set up has been cases. The first 50 RWS cases did just over 1500 rounds. The next 50 did almost the same. The 50 Lapua cases i did recently are absolutely fucked after 7 to 8 firings. The fireform loads i used in the RWS cases loosened the primer pockets on the Lapua cases during their fireform even though they are 60 grains of brass lighter. I have had to use the Lapua cases at the lower node as to what i did the RWS placing the rifle at a considerable velocity disadvantage. I revived 34 RWS cases for the weekends shoot. A little sticky on the extraction, but the primer pockets are like they were when new. Cases and bullets are everything on these big guns.


Tony Z.
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: Townsville 1000 Aus 14/7/08

Post by macca »

Thanks Tony,
I have loaded up some loads for the "Black Pig" and if I can get a day without wind gusts I'll get going.
I have loaded some VN165 and 2209.
I wonder if Lapua's quality has slipped a bit over the last few years?
Seems some problems in a lot of cals that never occurred before.
Have a good one,
Macca
Mick
.204 Ruger
Posts: 454
Joined: Fri Mar 09, 2007 8:47 am
Favourite Cartridge: 105mm
Location: Canberra

Re: Townsville 1000 Aus 14/7/08

Post by Mick »

Tony Z wrote:The after shoot autopsy is for a number of changes amongst a number of our shooters choosing to move away from the Fly/1K rifle and rest combination to pure 1K/600 rifles in different stocks and muzzle breaks fitted. Calibers will surely change as our range mods have drastically altered the range characteristics with some very different wind effects that are giving us some unusual vertical. With my new LG it will be a drop port magnum action, stretched barrel and muzzle braked 300 Redneck or Ackley with either 200 SMKs or 208 Amax. When a HG firing 10 shots can out agg the LGs for both group and score average, the choice for me after this weekend has never been clearer. My ailing old HG barrel finished the weekend with 3415 rounds through the original chambering heading into the tail end of its fith season. All the more reason to go to a big banger LG.

See you all next year. Tony Z.
Have had this in the back of my head for a while now, wondering how a braked 300 Ackley would go in LG....
Not like it hasn't been done before, but yes, has been an idea I've had for a while now and never really got round to. Be interesting to see how it goes for you...
Blackpete

Re: Townsville 1000 Aus 14/7/08

Post by Blackpete »

I'd just like to add my congrats to all the winners and special thanks to all the visiters for making the effort to get here. Many thanks also to all the organisers, without whom this great comp would not be possible. Lets hope the word will spread and next year will be bigger and better after all Townsville is a great place, especially in winter.

Tony, Jeff or Al, could you tell me who won the iron man part of the weekend.

Pete.
woob614271
17Rem
Posts: 1123
Joined: Mon Jan 29, 2007 8:49 pm
Favourite Cartridge: 17Rem, 22.250AI, 308
Location: townsville qld

Re: Townsville 1000 Aus 14/7/08

Post by woob614271 »

Defnitly not me; near last in the fly, and last for sure in the 600; glad I didn't shoot the 1k or it'd be real embarrasin'.
Thoroughly enjoyed the weekend, especially talkin' to our guests.
Hope to see you all (and more of you!) next year...
Aussie_bob
New Member
Posts: 39
Joined: Fri Jul 18, 2008 9:26 pm
Favourite Cartridge: 30BR
Contact:

Re: Townsville 1000 Aus 14/7/08

Post by Aussie_bob »

Hi All Well as Tony has said i have finaly prooved that a 30BR can shoot a group all on the target at 1,000 yards so now i will retire the 30BR from 1,000 yard shooting. So next year i may just shoot a 30X47 at 1000 yards.
Now Tony Tell everyone about shooting the 600 Benchrest.
Bob
Attachments
One of the 1,000 yard targets the other looks very similar both scored 39 with one 6 three 8`s and a 9
One of the 1,000 yard targets the other looks very similar both scored 39 with one 6 three 8`s and a 9
Post Reply