factory 204's
-
- New Member
- Posts: 71
- Joined: Wed May 02, 2007 9:09 am
- Favourite Cartridge: 6.5mm
- Location: sth oz
- Contact:
factory 204's
Hi all, just a silly question regarding the mighty .204r. What's a good out of the box , no need for mods ect .204?
What would be the optimum barrel length and twist rate in a factory rifle ? What dramas to expect. The reason for
asking is can't afford a custom made rifle as of money restraints (wife)
What would be the optimum barrel length and twist rate in a factory rifle ? What dramas to expect. The reason for
asking is can't afford a custom made rifle as of money restraints (wife)
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: factory 204's
they are all 1 in 12. 26 inch barrell allows you to get the full velocity.
I had a ruger VT. I caught the custom bug because it was so accurate. No Mods, good trigger and free floated out of the box
The T3 gets lots of praise, dont know barrel length tho.
CZ 527 Varmint is worth looking at
Rem VSSF (great basis to customise from later!)
Savage varmint rifles have the 26 inch barrel and accutrigger
Lots of choices
I had a ruger VT. I caught the custom bug because it was so accurate. No Mods, good trigger and free floated out of the box
The T3 gets lots of praise, dont know barrel length tho.
CZ 527 Varmint is worth looking at
Rem VSSF (great basis to customise from later!)
Savage varmint rifles have the 26 inch barrel and accutrigger
Lots of choices
Re: factory 204's
Im planning on getting a Tikka T3 Varmint in .204 later on. they have a 1:12 twist, a 23 3/4" barrel and a magzine cap of 6 rnds. and weighs 3.6kgs i think.
killbz
killbz
- Mevo2230
- 17 Hornet
- Posts: 251
- Joined: Sun Mar 25, 2007 9:48 am
- Favourite Cartridge: 9.3*62
- Location: Mangertron
Re: factory 204's
I rate my CZ527 in 204 ruger
Re: factory 204's
Straight out of the box you would probably say tikka and even savage would get the nod.
Something a bit different a ruger vt perhaps if you like laminate timber look and a cz for a few more $
Rem would have to be the go if you plan on making some mods down the track.
Also dont disregard a cooper or a kimber if your looking at something that will last and shoot very well out of the box for a few more clams!
Just my 2c
Something a bit different a ruger vt perhaps if you like laminate timber look and a cz for a few more $
Rem would have to be the go if you plan on making some mods down the track.
Also dont disregard a cooper or a kimber if your looking at something that will last and shoot very well out of the box for a few more clams!
Just my 2c
Re: factory 204's
I got my Remington VSSF II replaced recently as I was unlucky to get a bad one, but the replacement was super accurate from the box on run in and is now consistantly shooting .3 - .4 in load development. I expect this to get even tighter as the first day was blowing pretty hard.
Re: factory 204's
Hey mickgibbo what are the chances of getting a "bad one" as i was originally planning on getting that same model and caliber?, but after reading many reports of failing quality control at the big green, i decided to steer away from it and not risk it. It is aways my bad luck to get the one bad thing in hundreds.MickGibbo wrote:I got my Remington VSSF II replaced recently as I was unlucky to get a bad one, but the replacement was super accurate from the box on run in and is now consistantly shooting .3 - .4 in load development. I expect this to get even tighter as the first day was blowing pretty hard.
killbz
Re: factory 204's
To be honest I would say you would be very unlucky as every other one I have seen is an absolute Tack driver, and the service from them was exceptional in returning the faulty rifle.
I would be very suprised if you had a problem.
I would be very suprised if you had a problem.
Re: factory 204's
Hey mcgibbo just reading your list of rifles, seen as you have quite the flash .204 does the 222 or 22-250 see the light of day???
Re: factory 204's
Yeah they will get plenty of work still, the .222 is the knock about (very accurate) roo rifle, spotlight gun and loaner as I got it for free and I just look at it as a barrel saver. The 22.250 is also extremely accurate but will mainly be used on goats now (saving the 270WSM for deer and bigger) and for foxes and rabbits when I will have to do allot of walking etc.
The .204 I bought as a long range and splat rifle, the 22.250 could have done this but I wanted a varmint set up with a better set up rifle and something I can view the hit on. I plan on using the .204 for foxes mainly as they are my second favourite game to hunt and love whistleing. Also want to do some long range bunny work with it. Im doing some more range work with it tomorrow to finalise a load and it gets field tested out Taralga way next weekend.
2 Things I want to add to my collection down the track is an older not so pretty shotgun for the field and a 300WSM Winchester Etreme Weather when they come out for those massive hunts in the hills or 20km walks.
The .204 I bought as a long range and splat rifle, the 22.250 could have done this but I wanted a varmint set up with a better set up rifle and something I can view the hit on. I plan on using the .204 for foxes mainly as they are my second favourite game to hunt and love whistleing. Also want to do some long range bunny work with it. Im doing some more range work with it tomorrow to finalise a load and it gets field tested out Taralga way next weekend.
2 Things I want to add to my collection down the track is an older not so pretty shotgun for the field and a 300WSM Winchester Etreme Weather when they come out for those massive hunts in the hills or 20km walks.
Re: factory 204's
Tikka T3 varmint would probably give you the least problems but you need a 26" barrel to do the 204 justice IMO
-
- .223 Remington
- Posts: 420
- Joined: Tue Oct 31, 2006 11:23 pm
- Favourite Cartridge: .220 Swift
- Location: Wheatbelt W.A.
Re: factory 204's
Never noticed that 50 FPS made much difference myself .
Re: factory 204's
No varmin i have shot has noticed either. FPS don't matter if your rifle isnt accurate, Tikka's SHOOT of that there is no doubt.bushchook wrote:Never noticed that 50 FPS made much difference myself .
- Drew Jaeger
- .223 Remington
- Posts: 433
- Joined: Fri Jan 26, 2007 6:36 pm
- Favourite Cartridge: 7mm-08
- Location: Southern Tablelands, NSW
Re: factory 204's
That would be my VSSF II in 204! Tack driver, shoots 0.25" 5-shot groups and is a dream to shoot.MickGibbo wrote:To be honest ....... every other one I have seen is an absolute Tack driver,......
Re: factory 204's
We can add 2 more to that list now Drew, met 2 blokes shooting them at the range recently and they both were getting tight groups as well.