So now i think i will start to reload these too but what brass should i use ? im thinking of getting new brass then load them up.
Also i sort of floated the barrel by about 1/2a mil.
Rem sps 204 on the range
-
damige
Rem sps 204 on the range
A couple of mates and my son went to the little river range on monday for a shoot and load test which worked out real well got some great results (22-250 and 223), so after all testing done i pulled out the new Rem sps .204 and set up a target at 100 and tried the first of the factory ammo Remington acutip 32gr with a 3 shot group at about 1.5" C-C with a second at 1.1", then i tried Federal V-Shok 39gr Blitzking and got a 3 shot group of 0.5" C-C with a second group going the same, so im as happy as.
So now i think i will start to reload these too but what brass should i use ? im thinking of getting new brass then load them up.
Also i sort of floated the barrel by about 1/2a mil.
So now i think i will start to reload these too but what brass should i use ? im thinking of getting new brass then load them up.
Also i sort of floated the barrel by about 1/2a mil.
- Attachments
-
- IMG_0125.jpg (23.69 KiB) Viewed 616 times
-
- IMG_0126.jpg
- (21.98 KiB) Downloaded 443 times
-
Brett-Cox
- New Member
- Posts: 59
- Joined: Fri Nov 30, 2007 5:40 pm
- Favourite Cartridge: N/A
- Location: Mt Barker, WA
Re: Rem sps 204 on the range
Nice,That just a standard 700 sps?
-
damige
Re: Rem sps 204 on the range
As far as i know i got it second hand but spoke to shop and they say nothing had been done to it other than lighten up the trigger.
-
Brett-Cox
- New Member
- Posts: 59
- Joined: Fri Nov 30, 2007 5:40 pm
- Favourite Cartridge: N/A
- Location: Mt Barker, WA
Re: Rem sps 204 on the range
Very nice, How much s/h are these babies?