Another chassis has been replaced....

Talk about your Varmint Rifles and other firearms here!
Post Reply
User avatar
Seddo
.338 Lapua Magnum
Posts: 2054
Joined: Sat Jan 03, 2009 9:17 am
Favourite Cartridge: Creedmoor
Location: Vic

Another chassis has been replaced....

Post by Seddo »

The McMillan stock for my Lonestar arrived today and after the 4-5 month wait I still forgot to get some action screws.

BEFORE
Image
AFTER
Image

I only have 1 chassis left in my safe and it isn't going anywhere.

Sent from my SM-G965F using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Another chassis has been replaced....

Post by trevort »

what chassis? all I can see is a red barrel
User avatar
Seddo
.338 Lapua Magnum
Posts: 2054
Joined: Sat Jan 03, 2009 9:17 am
Favourite Cartridge: Creedmoor
Location: Vic

Re: Another chassis has been replaced....

Post by Seddo »

trevort wrote: Wed Mar 11, 2020 5:02 pm what chassis? all I can see is a red barrel
I cant complain about the chassis, I shot the smallest group with it at the fly nationals a few years ago using a bipod and rear bag. A made did the cerakote and he asked what colour, in my stupidity I said anything except black and that's what turned up. He has coloured the logos in yellow as well, that's why I went with a black and yellow stock.
User avatar
Rabbitz
.338 Lapua Magnum
Posts: 2421
Joined: Sun Mar 25, 2007 9:05 am
Favourite Cartridge: 222
Location: Barossa Valley, SA
Contact:

Re: Another chassis has been replaced....

Post by Rabbitz »

I know this will simply further expose my ignorance, but what is the difference between a stock and a chassis?
User avatar
Seddo
.338 Lapua Magnum
Posts: 2054
Joined: Sat Jan 03, 2009 9:17 am
Favourite Cartridge: Creedmoor
Location: Vic

Re: Another chassis has been replaced....

Post by Seddo »

The yellow of the rifle doest match the stock.Image

Sent from my SM-G965F using Tapatalk

User avatar
Seddo
.338 Lapua Magnum
Posts: 2054
Joined: Sat Jan 03, 2009 9:17 am
Favourite Cartridge: Creedmoor
Location: Vic

Re: Another chassis has been replaced....

Post by Seddo »

Rabbitz wrote:I know this will simply further expose my ignorance, but what is the difference between a stock and a chassis?
A chassis is almost always alloy and has a built in dbm where a traditional stock can be timber and f/glass.

You cam day all chassis are stocks bit not all stocks are chassis



Sent from my SM-G965F using Tapatalk

User avatar
Rabbitz
.338 Lapua Magnum
Posts: 2421
Joined: Sun Mar 25, 2007 9:05 am
Favourite Cartridge: 222
Location: Barossa Valley, SA
Contact:

Re: Another chassis has been replaced....

Post by Rabbitz »

Well it turns out I've been shooting a chassis for a few years and had no idea...
anschutzprecise.jpg
anschutzprecise.jpg (20.15 KiB) Viewed 12351 times
Post Reply