Advice on bedding a rifle

Gunsmithing & DIY forum for everyone. Enjoy!
Post your projects, questions and advice here.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Advice on bedding a rifle

Post by The Raven »

I'm looking for some advice on bedding a rifle.

I have two stocks for the rifle one synthetic (OEM) and a Boyds. The idea is to bed the OEM stock first in case I stuff it up, I'll have the Boyd's as a backup.\

Looking at the various Youtube videos I'm still not convinced it's the right way to go for a first timer with no first-hand backup.

Who here has done a bedding job and how tricky was it for your first attempt?
User avatar
Rabbitz
.338 Lapua Magnum
Posts: 2421
Joined: Sun Mar 25, 2007 9:05 am
Favourite Cartridge: 222
Location: Barossa Valley, SA
Contact:

Re: Advice on bedding a rifle

Post by Rabbitz »

I have only done the one and had the same trepidation as you.

In the end, it was fiddly getting the modelling clay I used as barriers and moulds in place but it wasn't too tricky.

As long as the release agent works, then if you've stuffed it up, then a dremel will remove the stuff up so you can start again.

The bottom line is you make a void that will be filled with the bedding material, add some modelling clay or similar as dams to stop the material going into places it shouldn't, put some release agent on the bits that will touch the bedding and fill it up with the material, bolt in the action and barrel, make sure it is straight and aligned then wait for it to dry.

What could possibly go wrong?
kickinback
50 BMG
Posts: 3991
Joined: Sun Jan 07, 2007 11:54 am
Favourite Cartridge: 260 Rem
Location: Lilydale Vic

Re: Advice on bedding a rifle

Post by kickinback »

Masking tape and neutral kiwi nugget. The two most important things for a quality bedding job.


Sent from my iPhone using Tapatalk Pro
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Advice on bedding a rifle

Post by trevort »

My four step process

1 drive to gunsmith
2 hand rifle to gunsmith
3 come back later and hand over money
4 drive home with bedded rifle


Sent from my iPhone using Tapatalk
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Advice on bedding a rifle

Post by The Raven »

trevort wrote: Mon Sep 16, 2019 7:15 am My four step process

1 drive to gunsmith
2 hand rifle to gunsmith
3 come back later and hand over money
4 drive home with bedded rifle


Sent from my iPhone using Tapatalk
That was my initial plan until I was told the starting price...
kickinback
50 BMG
Posts: 3991
Joined: Sun Jan 07, 2007 11:54 am
Favourite Cartridge: 260 Rem
Location: Lilydale Vic

Re: Advice on bedding a rifle

Post by kickinback »

What was the price?


Sent from my iPhone using Tapatalk Pro
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Advice on bedding a rifle

Post by The Raven »

kickinback wrote: Mon Sep 16, 2019 10:20 am What was the price?


Sent from my iPhone using Tapatalk Pro
Starting from $475

I understand labour rates aren't cheap and don't mind paying a fair price but I thought that a little too much.
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Advice on bedding a rifle

Post by trevort »

Wow. I dropped one off to Luke at Procal on friday for pillar bedding.

He's done them before so I didnt even ask the price. Hope he wasn't the one quoting you that
kickinback
50 BMG
Posts: 3991
Joined: Sun Jan 07, 2007 11:54 am
Favourite Cartridge: 260 Rem
Location: Lilydale Vic

Re: Advice on bedding a rifle

Post by kickinback »

If that’s the going rate I wish I said yes to Trev


Sent from my iPad using Tapatalk Pro
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Advice on bedding a rifle

Post by The Raven »

trevort wrote: Mon Sep 16, 2019 12:32 pm Wow. I dropped one off to Luke at Procal on friday for pillar bedding.

He's done them before so I didnt even ask the price. Hope he wasn't the one quoting you that
Trevor the quote I had was from a LGS out Frankston way.

I could've bought a Howa for that price...or perhaps I underestimated the cost of smithing these days.
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Advice on bedding a rifle

Post by Camel »

The Raven wrote: Mon Sep 16, 2019 2:33 pm
trevort wrote: Mon Sep 16, 2019 12:32 pm Wow. I dropped one off to Luke at Procal on friday for pillar bedding.

He's done them before so I didnt even ask the price. Hope he wasn't the one quoting you that
Trevor the quote I had was from a LGS out Frankston way.

I could've bought a Howa for that price...or perhaps I underestimated the cost of smithing these days.
Nah mate, that is bloody excessive for a bedding job, its not rocket science I would have thought 150 or so would be a good price. :?
kickinback
50 BMG
Posts: 3991
Joined: Sun Jan 07, 2007 11:54 am
Favourite Cartridge: 260 Rem
Location: Lilydale Vic

Re: Advice on bedding a rifle

Post by kickinback »

Camel wrote:
The Raven wrote: Mon Sep 16, 2019 2:33 pm
trevort wrote: Mon Sep 16, 2019 12:32 pm Wow. I dropped one off to Luke at Procal on friday for pillar bedding.

He's done them before so I didnt even ask the price. Hope he wasn't the one quoting you that
Trevor the quote I had was from a LGS out Frankston way.

I could've bought a Howa for that price...or perhaps I underestimated the cost of smithing these days.
Nah mate, that is bloody excessive for a bedding job, its not rocket science I would have thought 150 or so would be a good price. :?
There’s about an hour and a half labour, pillars if needed and bedding compound. If that adds up to $150 your going to go broke.


Sent from my iPad using Tapatalk Pro
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Advice on bedding a rifle

Post by trevort »

Raven that shop is well known for unfortunate pricing policy.
Call procal. If you like the price I can drop yours off when I pick mine up


Sent from my iPhone using Tapatalk
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Advice on bedding a rifle

Post by The Raven »

trevort wrote: Mon Sep 16, 2019 7:03 pm Raven that shop is well known for unfortunate pricing policy.
Call procal. If you like the price I can drop yours off when I pick mine up


Sent from my iPhone using Tapatalk
Sounds like a plan Trevor. PM me the details and I'll organise to get it to you.
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Advice on bedding a rifle

Post by trevort »

The Raven wrote:
trevort wrote: Mon Sep 16, 2019 7:03 pm Raven that shop is well known for unfortunate pricing policy.
Call procal. If you like the price I can drop yours off when I pick mine up


Sent from my iPhone using Tapatalk
Sounds like a plan Trevor. PM me the details and I'll organise to get it to you.
Raven text him and make sure you are happy with the price first. I’m waiting on a call to tell me when mine is ready so as long as you are happy with the price you can drop it over as soon as you like


Sent from my iPhone using Tapatalk
Post Reply