Next DIY project

Gunsmithing & DIY forum for everyone. Enjoy!
Post your projects, questions and advice here.
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

Been waiting for glue to dry, final fitting of upper layer with holes. Now figuring out a lid for it

Image

Probably trying to get to smart for my pay grade, but will keep trying

Yeah Marcus, he is a little Rippa of a dog, bit cool today so he is burrowed in to get warm

Image

Barry he stole my beautifully tanned fallow dawn skin ImageImage
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

First coat of clear on the box

The sides

Image

Image

And the two ends

Image

Image

Image
Branxhunter
.338 Lapua Magnum
Posts: 2223
Joined: Sat Dec 10, 2011 7:49 pm
Favourite Cartridge: .20-222
Location: South west Victoria

Re: Next DIY project

Post by Branxhunter »

Looks terrific

Marcus
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Next DIY project

Post by The Raven »

Durrie holder?

Whatever it is it looks great.
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

The Raven wrote: Fri Jul 26, 2019 9:19 pm Durrie holder?

Whatever it is it looks great.
Nah, you were pretty close with the exotic cartridge holder, it is a cartridge holder but not exotic cartridge, just plain old 6BR. :lol:

Happy with it so far, got to improve my joints, might get flash and try some dovetailing next time, got the router bits, just not sure on how to do it. :?
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Next DIY project

Post by The Raven »

Camel wrote: Fri Jul 26, 2019 9:51 pm
The Raven wrote: Fri Jul 26, 2019 9:19 pm Durrie holder?

Whatever it is it looks great.
Nah, you were pretty close with the exotic cartridge holder, it is a cartridge holder but not exotic cartridge, just plain old 6BR. :lol:

Happy with it so far, got to improve my joints, might get flash and try some dovetailing next time, got the router bits, just not sure on how to do it. :?
6BR is exotic...never seen it on the shelf at a LGS.

Heh, I have a stack of router bits. From memory I've used two, so consider me a router expert (only because I still have 10 fingers) :wink: :wink:
User avatar
DSD
.270 Winchester
Posts: 1446
Joined: Wed Jul 17, 2013 9:06 pm
Favourite Cartridge: N/A
Location: In hiding

Re: Next DIY project

Post by DSD »

Camel wrote:
The Raven wrote: Fri Jul 26, 2019 9:19 pm Durrie holder?

Whatever it is it looks great.
Nah, you were pretty close with the exotic cartridge holder, it is a cartridge holder but not exotic cartridge, just plain old 6BR. Image

Happy with it so far, got to improve my joints, might get flash and try some dovetailing next time, got the router bits, just not sure on how to do it. :?
Don't worry about the dove tail joints just be like the rest of us and cut some pigeon tail joints

Sent from my SM-G930F using Tapatalk

User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

DSD wrote: Sat Jul 27, 2019 6:32 am
Camel wrote:
The Raven wrote: Fri Jul 26, 2019 9:19 pm Durrie holder?

Whatever it is it looks great.
Nah, you were pretty close with the exotic cartridge holder, it is a cartridge holder but not exotic cartridge, just plain old 6BR. Image

Happy with it so far, got to improve my joints, might get flash and try some dovetailing next time, got the router bits, just not sure on how to do it. :?
Don't worry about the dove tail joints just be like the rest of us and cut some pigeon tail joints

Sent from my SM-G930F using Tapatalk
Now I never thought of that, thanks Dave, pigeon tail joints must be a bit rough, will match up with my metal work skills, I can pigeon shit weld with the best of them. :lol: :lol:
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Next DIY project

Post by Camel »

Did some more on it today after spending the morning out picking up a workshop gantry,

Image

Sanding, sanding, another coat of spray clear finish, thats 4 so far, then some more on the lid, gluing in small diamond shaped wooden tiles and making and fitting some edging. While sitting in the shed watching the paint and glue dry :roll: I decided to take the Ravens advice and started making a loading block for large (308) sized case heads. My old simplex blocks only have 40 holes for both small and large case head sizes, so figured I would make some with 50 holes, I will start the small head size (222) tomorrow, and might even do one for magnum cases.

No photos yet, will get some tomorrow. :D
Old Trev-39
.17 HMR
Posts: 194
Joined: Tue Nov 04, 2014 4:02 pm
Favourite Cartridge: .284Win

Re: Next DIY project

Post by Old Trev-39 »

Hi Camel,
A tip for preparation between coats on your box or anything else you put clear on. Use non soap impregnated steel wool instead of fine sandpaper and you will get a better finish. Rub up and down with the grain not across or in circles. This tip was given to me by an old French polisher here in cairns many years ago.
Cheers,
Trevor.
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

Yeah, thanks Trev, I am planning on using fine steel wool in between the next two coats now I have the grain nicely filled, just a matter of a little bit more elbow grease. Yeah, its not a very good idea to rub across the grain, though in this timber because of the swirls its a little difficult to follow the grain flow. :lol:
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

More sanding and another coat of clear on the box this am, think that will be the last.

Image

Image

Image

Then got stuck into the lid which was clamped up overnight

Unsprayed

Image

Will give it its first coat this arvo. Also drilled and sanded the loading block, will spray that one as well

Image
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

A few minutes and a quick spray later, really brings out the grain

Image

Image

Image
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Next DIY project

Post by Camel »

Update time, finished my two loading trays, large is red gum with red gum edging

Image

Small one is redgum with red cedar edging

Image

Still going on the cartridge box, had to do a slight modification by adding another layer each side so my hinge screws wouldn’t go right through the sides

Image

User avatar
DSD
.270 Winchester
Posts: 1446
Joined: Wed Jul 17, 2013 9:06 pm
Favourite Cartridge: N/A
Location: In hiding

Re: Next DIY project

Post by DSD »

I don't suppose they sell shorter screws in hilston.

Sent from my SM-G930F using Tapatalk

Post Reply