Faith restoration in the younger generation

Discuss all aspects of Ammunition and Reloading here.
User avatar
curan
.338 Lapua Magnum
Posts: 2405
Joined: Sat Aug 18, 2007 1:53 am
Favourite Cartridge: 30/30
Location: Mid North, South Australia

Re: Faith restoration in the younger generation

Post by curan »

Rabbitz wrote: Sun Aug 12, 2018 9:06 am
dashooter wrote: Sun Aug 12, 2018 8:58 am
Nah, you have to say worse stuff than that to get banned on FB.
Well that just confirms my unconscious and conscious biases against facebook. :D
+1
User avatar
MISSED
Moderator
Posts: 8377
Joined: Sat Dec 22, 2007 12:23 pm
Favourite Cartridge: 20 PPC
Location: YASS

Re: Faith restoration in the younger generation

Post by MISSED »

Knackers is forever in the FB sin bin :shock:
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Faith restoration in the younger generation

Post by The Raven »

Branxhunter wrote: Sat Aug 11, 2018 8:19 pm The ADI manual is available online as well.

Happy loading.

Marcus
I like the ADI manual as it always provides the most up to date information.
User avatar
bimbo
300 Win Mag
Posts: 1791
Joined: Tue Oct 10, 2006 10:34 pm
Favourite Cartridge: 17HH
Location: Newcastle, NSW

Re: Faith restoration in the younger generation

Post by bimbo »

ADI is the go to for me too as I use their powders but also like to double check against another manual when starting a new loaf just to double check they are suggesting similar loads
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Faith restoration in the younger generation

Post by The Raven »

bimbo wrote: Sun Aug 12, 2018 3:01 pm ADI is the go to for me too as I use their powders but also like to double check against another manual when starting a new loaf just to double check they are suggesting similar loads
Yeah, I do that to. It's definitely a good idea as you never know when a typo or internet glitch could transpose a digit or two.
User avatar
DSD
.270 Winchester
Posts: 1446
Joined: Wed Jul 17, 2013 9:06 pm
Favourite Cartridge: N/A
Location: In hiding

Re: Faith restoration in the younger generation

Post by DSD »

trevort wrote:I might get the van stick. Some fucken wanker asked why trim cases over listed max length when they still chamber

I. Replied

Why would you set off little home made explosives beside your face without reading an instruction manual ffs


Sent from my iPhone using Tapatalk
I would guess that was a loaded question and old m8 is at home laughing because he actually knows the answer to what happens next

Ps it's not your rifle blowing up!

Sent from my SM-G930F using Tapatalk

Stuie0
New Member
Posts: 54
Joined: Wed Jul 25, 2018 6:22 pm
Favourite Cartridge: 223
Location: Pakenham

Re: Faith restoration in the younger generation

Post by Stuie0 »

And today I finally put all the reading into action.

As well as the old tip press, which is not very accurate at all hahaha
But with careful consideration and measuring every round, I've produced some that will hopefully fire out the end of my rifle.

Hopefully my new press comes this week as well as a few other small things to make the process easier. Image

Sent from my SM-G960F using Tapatalk

User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Faith restoration in the younger generation

Post by trevort »

Buy a decapping die and use the tip press for decapping


Sent from my iPhone using Tapatalk
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: Faith restoration in the younger generation

Post by The Raven »

trevort wrote: Sat Aug 18, 2018 5:05 pm Buy a decapping die and use the tip press for decapping


Sent from my iPhone using Tapatalk
If I had the bench space that's exactly what I was planning to do with it. In any case, I prefer to decap and clean then resize. So a decapper is good for that.
Stuie0
New Member
Posts: 54
Joined: Wed Jul 25, 2018 6:22 pm
Favourite Cartridge: 223
Location: Pakenham

Re: Faith restoration in the younger generation

Post by Stuie0 »

trevort wrote:Buy a decapping die and use the tip press for decapping


Sent from my iPhone using Tapatalk
That's what I'll be doing Image

Sent from my SM-G960F using Tapatalk

User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Faith restoration in the younger generation

Post by Camel »

Stuie0 wrote: Sat Aug 18, 2018 4:08 pm And today I finally put all the reading into action.

As well as the old tip press, which is not very accurate at all hahaha
But with careful consideration and measuring every round, I've produced some that will hopefully fire out the end of my rifle.

Hopefully my new press comes this week as well as a few other small things to make the process easier. Image

Sent from my SM-G960F using Tapatalk
Good to see the tip press getting a work out :lol:
Post Reply