Projectile RPM limits...

Discuss all aspects of Ammunition and Reloading here.
User avatar
MISSED
Moderator
Posts: 8377
Joined: Sat Dec 22, 2007 12:23 pm
Favourite Cartridge: 20 PPC
Location: YASS

Re: Projectile RPM limits...

Post by MISSED »

I refer to the New Years resolution thread.
Con
.308 Winchester
Posts: 1515
Joined: Thu Sep 14, 2006 11:10 am

Re: Projectile RPM limits...

Post by Con »

MISSED wrote: Mon Jan 08, 2018 1:17 pm I refer to the New Years resolution thread.
He claims that the decision having been made in 2017 absolves him of that statement regarding 2018. :lol:
Cheers...
Con
Waldo
.270 Winchester
Posts: 1254
Joined: Sat Aug 02, 2014 10:06 pm
Contact:

Re: Projectile RPM limits...

Post by Waldo »

C'mon Con, join the ranks of the 5.6x57 brigade :o

You know you want to :lol: :lol: :lol:
justjeff
22-250 Remington
Posts: 576
Joined: Tue Jul 08, 2008 7:49 pm
Favourite Cartridge: 270 Win

Re: Projectile RPM limits...

Post by justjeff »

Guys,

I know SMK 6mm 107 gr will blow up at 320 000 rpm, nearly blew old Trev up with one at the range while he was in the butts. Not a scratch on the paper, but a big grey mist at about 980 yds. Also blew some up at about 50 yards. I used to have a 100 yd target with a perfect little comet trail off the side of the hole from one too. So I have ditched the 8 twist for the faster cartridges and gone to 9 twist to get back under the 300 000 mark.

Jeff
mistit
.308 Winchester
Posts: 1602
Joined: Tue Jul 14, 2009 7:42 pm
Favourite Cartridge: 220 swift ack
Location: Orrangeville

Re: Projectile RPM limits...

Post by mistit »

Con I have had 2 fast twist 22 cal barrels on a Sako trg 22 that I did with the intention of shooting 75 vmax,s
They shot well at around 3200 out of a 22250 ackley , by no means bench rest accurate ether, but plenty good enough for varmints ,3350 would see 1/10 come apart after about 20-30 rounds on a clean barrel , however I did a 12 twist on my Barnard with the intention of shooting 53 vmax,s
Bc 290 and at 4150 -4250 they are benchrest accurate to 550 yds and very deadly in anything up to reasonable conditions
But I have the urge to try some 80 grain vmax,s so a few weeks back I ordered an 8 twist flutted light varmint maddco
Will be chambered in my all time favourite 220 ackley
Yes I no they may not hold together at the available velocity but it’s time again to give it another go
On a side note nothing in 22 cal kills like a 75 vmax either
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Projectile RPM limits...

Post by trevort »

frl0173 wrote:I have a video and still shot of a friend shooting his 20-250AI shooting 55gn projectiles and watching them turn to grey mist cloud at about the 20m mark.

This is the saddest post I have ever read Image


Sent from my iPhone using Tapatalk
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Projectile RPM limits...

Post by trevort »

mistit wrote:Con I have had 2 fast twist 22 cal barrels on a Sako trg 22 that I did with the intention of shooting 75 vmax,s
They shot well at around 3200 out of a 22250 ackley , by no means bench rest accurate ether, but plenty good enough for varmints ,3350 would see 1/10 come apart after about 20-30 rounds on a clean barrel , however I did a 12 twist on my Barnard with the intention of shooting 53 vmax,s
Bc 290 and at 4150 -4250 they are benchrest accurate to 550 yds and very deadly in anything up to reasonable conditions
But I have the urge to try some 80 grain vmax,s so a few weeks back I ordered an 8 twist flutted light varmint maddco
Will be chambered in my all time favourite 220 ackley
Yes I no they may not hold together at the available velocity but it’s time again to give it another go
On a side note nothing in 22 cal kills like a 75 vmax either
Image


Sent from my iPhone using Tapatalk
Con
.308 Winchester
Posts: 1515
Joined: Thu Sep 14, 2006 11:10 am

Re: Projectile RPM limits...

Post by Con »

Mistit,
Maddco still looking at March for 1:8" barrels?
Cheers...
Con
frl0173
New Member
Posts: 98
Joined: Thu Oct 29, 2009 9:08 pm
Favourite Cartridge: 204Ruger
Location: Western Sydney, NSW

Re: Projectile RPM limits...

Post by frl0173 »

trevort wrote: Mon Jan 22, 2018 6:00 pm
frl0173 wrote:I have a video and still shot of a friend shooting his 20-250AI shooting 55gn projectiles and watching them turn to grey mist cloud at about the 20m mark.

This is the saddest post I have ever read Image


Sent from my iPhone using Tapatalk
Don't cry mate, at least he figured out why the Bergers were vaporizing, exceeding the max recommended velocity according to Berger. 🤣
mistit
.308 Winchester
Posts: 1602
Joined: Tue Jul 14, 2009 7:42 pm
Favourite Cartridge: 220 swift ack
Location: Orrangeville

Re: Projectile RPM limits...

Post by mistit »

Con wrote: Mon Jan 22, 2018 8:24 pm Mistit,
Maddco still looking at March for 1:8" barrels?
Cheers...
Con
I ordered an 8 and 14 both March he said
Con
.308 Winchester
Posts: 1515
Joined: Thu Sep 14, 2006 11:10 am

Re: Projectile RPM limits...

Post by Con »

mistit wrote: Mon Jan 22, 2018 10:05 pm
Con wrote: Mon Jan 22, 2018 8:24 pm Mistit,
Maddco still looking at March for 1:8" barrels?
Cheers...
Con
I ordered an 8 and 14 both March he said
Yep, was told 22cal barrels in March.
Cheers...
Con
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Projectile RPM limits...

Post by trevort »

frl0173 wrote:
trevort wrote: Mon Jan 22, 2018 6:00 pm
frl0173 wrote:I have a video and still shot of a friend shooting his 20-250AI shooting 55gn projectiles and watching them turn to grey mist cloud at about the 20m mark.

This is the saddest post I have ever read Image


Sent from my iPhone using Tapatalk
Don't cry mate, at least he figured out why the Bergers were vaporizing, exceeding the max recommended velocity according to Berger. 🤣
I’ve got them going at 3880. Where does Berger say to stop?


Sent from my iPhone using Tapatalk
User avatar
dashooter
.338 Lapua Magnum
Posts: 2805
Joined: Tue Oct 15, 2013 4:08 pm
Favourite Cartridge: Wby Magnum's :)
Location: Deep South Canberra

Re: Projectile RPM limits...

Post by dashooter »

trevort wrote: Tue Jan 23, 2018 6:02 am
frl0173 wrote:
trevort wrote: Mon Jan 22, 2018 6:00 pm
frl0173 wrote:I have a video and still shot of a friend shooting his 20-250AI shooting 55gn projectiles and watching them turn to grey mist cloud at about the 20m mark.

This is the saddest post I have ever read Image


Sent from my iPhone using Tapatalk
Don't cry mate, at least he figured out why the Bergers were vaporizing, exceeding the max recommended velocity according to Berger. 🤣
I’ve got them going at 3880. Where does Berger say to stop?


Sent from my iPhone using Tapatalk
Should be able to get to 4200 fps and still hit rabbits at range Trev based on testing done in September. That’s out of a 1:9 twist barrel.
mistit
.308 Winchester
Posts: 1602
Joined: Tue Jul 14, 2009 7:42 pm
Favourite Cartridge: 220 swift ack
Location: Orrangeville

Re: Projectile RPM limits...

Post by mistit »

For those that may pick up on it
It is meant to say amax not vmax in my previous post :D
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Projectile RPM limits...

Post by trevort »

dashooter wrote:
trevort wrote: Tue Jan 23, 2018 6:02 am
frl0173 wrote:
trevort wrote: Mon Jan 22, 2018 6:00 pm
frl0173 wrote:I have a video and still shot of a friend shooting his 20-250AI shooting 55gn projectiles and watching them turn to grey mist cloud at about the 20m mark.

This is the saddest post I have ever read Image


Sent from my iPhone using Tapatalk
Don't cry mate, at least he figured out why the Bergers were vaporizing, exceeding the max recommended velocity according to Berger. 🤣
I’ve got them going at 3880. Where does Berger say to stop?


Sent from my iPhone using Tapatalk
Should be able to get to 4200 fps and still hit rabbits at range Trev based on testing done in September. That’s out of a 1:9 twist barrel.
You talking at about 55 gn 20 cal pills?


Sent from my iPhone using Tapatalk
Post Reply