A Learning

Talk about your Varmint Rifles and other firearms here!
Post Reply
User avatar
antsa
New Member
Posts: 21
Joined: Wed Nov 08, 2017 7:40 pm
Favourite Cartridge: .223 Rem
Location: Fleurieu Peninsula, SA

A Learning

Post by antsa »

Learned something the other day about my newly acquired Sako AI 222Rem. My usual method when walking around the paddocks with one of my Sako 85's is to have the loaded mag inserted,the bolt open and rifle slung over my right shoulder. On my first walk with the AI I followed this procedure as well and all was good.

Going for another stroll I loaded the floor-plate mag out on the back patio and then hung it over my shoulder. Turned around to head off through the garden when I heard a "clunk". Looked down and there was the bolt lying on the bricks! Didn't realise that the bolt stop catch was so "easy". I'm thanking my Gods that it happened there at home and not out in one of the 5 hectare hay paddocks.

Will have to adjust my method now - bolt closed over a round. Cannot bring myself to walk around with one up the spout with a closed bolt.

Cheers
Last edited by antsa on Tue Jan 16, 2018 7:22 am, edited 1 time in total.
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: A Learning

Post by Camel »

Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
User avatar
Glenn
375 Cheytac
Posts: 1433
Joined: Tue Apr 10, 2007 5:14 pm
Favourite Cartridge: 300WM
Location: Victoria

Re: A Learning

Post by Glenn »

Camel wrote: Mon Jan 15, 2018 4:54 pm Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
2016-05-16-13-13-46-942451007.jpeg
2016-05-16-13-13-46-942451007.jpeg (6.85 KiB) Viewed 1327 times
User avatar
antsa
New Member
Posts: 21
Joined: Wed Nov 08, 2017 7:40 pm
Favourite Cartridge: .223 Rem
Location: Fleurieu Peninsula, SA

Re: A Learning

Post by antsa »

Camel wrote: Mon Jan 15, 2018 4:54 pm Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
That's the one. Will give it a run as is for while but as I said before - it's gnawing away.


Cheers
User avatar
MISSED
Moderator
Posts: 8377
Joined: Sat Dec 22, 2007 12:23 pm
Favourite Cartridge: 20 PPC
Location: YASS

Re: A Learning

Post by MISSED »

Camel wrote:Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
Image

Antsa just check your bolt release spring is not broken or has some shit in it.It is easy to remove with a flat head screw driver.I have had Sakos for over 30 years and have never had a bolt fall out



Sent from my iPhone using Tapatalk
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: A Learning

Post by Camel »

Glenn wrote: Mon Jan 15, 2018 7:43 pm
Camel wrote: Mon Jan 15, 2018 4:54 pm Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
2016-05-16-13-13-46-942451007.jpeg
MISSED wrote: Mon Jan 15, 2018 9:03 pm
Camel wrote:Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
Image

Antsa just check your bolt release spring is not broken or has some shit in it.It is easy to remove with a flat head screw driver.I have had Sakos for over 30 years and have never had a bolt fall out



Sent from my iPhone using Tapatalk
The fishing around here is usually pretty good, up to standard tonight, however I will throw these two tiddlers back in for them to grow up a little. :roll:
User avatar
MISSED
Moderator
Posts: 8377
Joined: Sat Dec 22, 2007 12:23 pm
Favourite Cartridge: 20 PPC
Location: YASS

Re: A Learning

Post by MISSED »

Camel wrote:
Glenn wrote: Mon Jan 15, 2018 7:43 pm
Camel wrote: Mon Jan 15, 2018 4:54 pm Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
2016-05-16-13-13-46-942451007.jpeg
MISSED wrote: Mon Jan 15, 2018 9:03 pm
Camel wrote:Don't worry mate, its only a Sako, hardly worth picking the dropped bolt up. :twisted: :lol: :mrburns: Is that the one you are contemplating turning into a 20/222 ?
Image

Antsa just check your bolt release spring is not broken or has some shit in it.It is easy to remove with a flat head screw driver.I have had Sakos for over 30 years and have never had a bolt fall out



Sent from my iPhone using Tapatalk
The fishing around here is usually pretty good, up to standard tonight, however I will throw these two tiddlers back in for them to grow up a little. :roll:
The quality of the bites usually reflects the quality of the bait


Sent from my iPhone using Tapatalk
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: A Learning

Post by Camel »

Yeah I spose you are right, I was using fresh bait, seems I should be using old stale smelly bait. :lol:
User avatar
Glenn
375 Cheytac
Posts: 1433
Joined: Tue Apr 10, 2007 5:14 pm
Favourite Cartridge: 300WM
Location: Victoria

Re: A Learning

Post by Glenn »

Camel wrote: Tue Jan 16, 2018 6:34 am Yeah I spose you are right, I was using fresh bait, seems I should be using old stale smelly bait. :lol:
Ther was NOTHING fresh about that!

All your bait old, no, ancient!

Glenn
mistit
.308 Winchester
Posts: 1602
Joined: Tue Jul 14, 2009 7:42 pm
Favourite Cartridge: 220 swift ack
Location: Orrangeville

Re: A Learning

Post by mistit »

Antsa, I did the same thing 35 years ago in the hills in Mudgee and didn't realise until I went to take a shot , backtracking we found it in a clear running creek about a foot deep , when I took a large step over the creek it dropped out
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: A Learning

Post by trevort »

This was the cause for one of AHNs most famous posts. No one will ever know whether he was joking or not but there was a deadpan delivery.
Ogre’s solution for a bloke who lost his bolt in a paddock involved the use of star pickets and fencing wire to convert his Ute into a mobile metal detector


Sent from my iPhone using Tapatalk
johno1
7mm Rem Mag
Posts: 1226
Joined: Mon May 18, 2009 3:59 pm
Favourite Cartridge: 5mm rimfire
Location: Beyond Black stump, Vic

Re: A Learning

Post by johno1 »

I don't remember that yarn Trevor but its a winner whichever way you look at it.

Firstly if it was accurate advise its a winner

Secondly, if its a piss take he would have dragged the usual AHN suspects along like a slipping anchor :lol: :lol: :lol:

Johno
Post Reply