22BR feeding from magazine

[Jmc]

Hi all hoping for some help I'm hoping I can get my magazine modified to feed my 22BR the gun is a tikka LSA 55 been told it's the same magazine as m55 the gun was a 22-250 before it was changed.

[MISSED]

I will have a go at describing how I think you can do it
First shorten magazine follower
Block the front of the mag box with an L shaped piece with the short part of the L at the top to act as an extension of the feed ramp
That is how my Sako was done for the 17 Mach IV and it worked (but so did the standard follower )

[Camel]

Yeah thats sorta what I reckon you need to do. With the LSA55 being a push feed you shouldn't have any trouble with it feeding as long as the projectile doesnt get pushed down at the front.

[Brad Y]

The standard 22 and 6br case is a bit of a bugger to feed from a mag, but the dasher or BRX case is easier. You probably have one of the better actions and mags to make worth though. Missed is on the money with it.