Lets Kick This One Around
-
- 7mm Rem Mag
- Posts: 1226
- Joined: Mon May 18, 2009 3:59 pm
- Favourite Cartridge: 5mm rimfire
- Location: Beyond Black stump, Vic
Lets Kick This One Around
So as i said got the 19 hornet back together and want to work with 32gr bullet and CFE BLK. Hogdon loads as follows
17 Ackley hornet 30gr bullet CFE BLK
10.0gr = 2,726 fps @ 36,900 CUP 10.7gr = 2.917fps @ 45,400 CUP
22 K Hornet
14.4gr = 31,030 fps @ 26,3000 CUP 16.0 = 3,219 fps @ 30,300 CUP
19 Hornet 32gr bullet
AA 1680 13.5gr = 3,340 fps
4227 (2205) 12.0gr = 3,275 fps
Vhit N 120 13.3gr = 3,270 fps.
So lets work out a safe starting load for CFE BLK
Johno
17 Ackley hornet 30gr bullet CFE BLK
10.0gr = 2,726 fps @ 36,900 CUP 10.7gr = 2.917fps @ 45,400 CUP
22 K Hornet
14.4gr = 31,030 fps @ 26,3000 CUP 16.0 = 3,219 fps @ 30,300 CUP
19 Hornet 32gr bullet
AA 1680 13.5gr = 3,340 fps
4227 (2205) 12.0gr = 3,275 fps
Vhit N 120 13.3gr = 3,270 fps.
So lets work out a safe starting load for CFE BLK
Johno
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Lets Kick This One Around
You said the burn rate is between 1680 (fast) and N200 (slow) I would be picking a mid range load for N200 and work from there
- stinkitup
- .338 Lapua Magnum
- Posts: 3217
- Joined: Fri Aug 03, 2007 10:46 am
- Favourite Cartridge: 6.5x55
- Location: Lower Hunter Valley
Re: Lets Kick This One Around
Seeing as similar case but larger cal the 17hornet loads would be in the light side. Should be okay to start i reckon.
Sent from my SM-N910G using Tapatalk
Sent from my SM-N910G using Tapatalk
-
- 7mm Rem Mag
- Posts: 1226
- Joined: Mon May 18, 2009 3:59 pm
- Favourite Cartridge: 5mm rimfire
- Location: Beyond Black stump, Vic
Re: Lets Kick This One Around
Fastest to slowest
#68 AA 1680
#69 CFE BLK
#70 Norma 200
Bugger all difference in burn rate.
My thoughts were along those lines Ryan I reckon 11.0 to 11.5gr would be a pretty safe start load.
Johno
#68 AA 1680
#69 CFE BLK
#70 Norma 200
Bugger all difference in burn rate.
My thoughts were along those lines Ryan I reckon 11.0 to 11.5gr would be a pretty safe start load.
Johno
- stinkitup
- .338 Lapua Magnum
- Posts: 3217
- Joined: Fri Aug 03, 2007 10:46 am
- Favourite Cartridge: 6.5x55
- Location: Lower Hunter Valley
Re: Lets Kick This One Around
Sounds like a plan Johno
Sent from my SM-N910G using Tapatalk
Sent from my SM-N910G using Tapatalk
- MISSED
- Moderator
- Posts: 8377
- Joined: Sat Dec 22, 2007 12:23 pm
- Favourite Cartridge: 20 PPC
- Location: YASS
Re: Lets Kick This One Around
I am going to buy a 22 K Hornet and run 14.4 grains of CFE BLK
-
- 7mm Rem Mag
- Posts: 1226
- Joined: Mon May 18, 2009 3:59 pm
- Favourite Cartridge: 5mm rimfire
- Location: Beyond Black stump, Vic
Re: Lets Kick This One Around
Was'nt convinced on those figures either I should have inserted quatation marks but its from the Hodgdon web site
Johno
Johno
-
- 7mm Rem Mag
- Posts: 1226
- Joined: Mon May 18, 2009 3:59 pm
- Favourite Cartridge: 5mm rimfire
- Location: Beyond Black stump, Vic
Re: Lets Kick This One Around
Well there was a power of input on this subject
Back to cakes & cheeses
Johno
Back to cakes & cheeses
Johno
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Lets Kick This One Around
Sorry mate, but I know sod all about Hornets.
I do have access to a nice lemonade scone recipe though ........
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: Lets Kick This One Around
Johno you might be the only person I know of with a 19 anything and I've never heard of the powder you mention
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
- 7mm Rem Mag
- Posts: 1226
- Joined: Mon May 18, 2009 3:59 pm
- Favourite Cartridge: 5mm rimfire
- Location: Beyond Black stump, Vic
Re: Lets Kick This One Around
Well this powder is bloody fine and its going to go through a powder measure just lovely.
Can't wait to see if Rob has it in the quickload update.
Just loaded one round of 7.62x39 with Tony's load of 30.0gr i'll see what presure I get in the CZ
Johno
Johno
Can't wait to see if Rob has it in the quickload update.
Just loaded one round of 7.62x39 with Tony's load of 30.0gr i'll see what presure I get in the CZ
Johno
Johno
- dashooter
- .338 Lapua Magnum
- Posts: 2805
- Joined: Tue Oct 15, 2013 4:08 pm
- Favourite Cartridge: Wby Magnum's :)
- Location: Deep South Canberra
Re: Lets Kick This One Around
Not here as yet Johno. Have emailed Neconos to see if i can get a tracking number.
-
- 7mm Rem Mag
- Posts: 1226
- Joined: Mon May 18, 2009 3:59 pm
- Favourite Cartridge: 5mm rimfire
- Location: Beyond Black stump, Vic
Re: Lets Kick This One Around
No worries mate.
Re the powder I just loaded a 123gr in front of 30gr CFE BLK, no presure worries and seemed mild to the shoulder, came and ran the powder through the RCBS measure and did 20 rounds, I checked everyone of the scales and the dropped load was perfect, this is a nice powder
Johno
Re the powder I just loaded a 123gr in front of 30gr CFE BLK, no presure worries and seemed mild to the shoulder, came and ran the powder through the RCBS measure and did 20 rounds, I checked everyone of the scales and the dropped load was perfect, this is a nice powder
Johno