Trying to tan a hide
-
- New Member
- Posts: 18
- Joined: Sun Jun 14, 2015 7:05 pm
- Favourite Cartridge: .308
- Location: Seaford Victoria
Trying to tan a hide
G'day guys,
Managed to get a fellow doe on the weekend and I thought I would have a go at tanning the skin.
I covered it in salt and noticed that the left over flesh had started to go hard(Monday). What is the best way to remove flesh and not put holes in the skin?
At what point is it stuffed?
Cheers.
Managed to get a fellow doe on the weekend and I thought I would have a go at tanning the skin.
I covered it in salt and noticed that the left over flesh had started to go hard(Monday). What is the best way to remove flesh and not put holes in the skin?
At what point is it stuffed?
Cheers.
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: Trying to tan a hide
about time you joined in
- MISSED
- Moderator
- Posts: 8377
- Joined: Sat Dec 22, 2007 12:23 pm
- Favourite Cartridge: 20 PPC
- Location: YASS
Re: Trying to tan a hide
Yeah What your father in law said Keith
Contact BarryB as he is the site Tanning expert
Contact BarryB as he is the site Tanning expert
- LoneRider
- 50 BMG
- Posts: 3899
- Joined: Thu May 22, 2008 10:20 pm
- Favourite Cartridge: 308
- Location: rubyvale,Central Qld
Re: Trying to tan a hide
if all else fails,you could ask my dad.
he used to be pretty good at tanning mine
![Wink :wink:](./images/smilies/icon_wink.gif)
he used to be pretty good at tanning mine
![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Wink :wink:](./images/smilies/icon_wink.gif)
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Trying to tan a hide
If you haven't already, trim off any chunks of meat and fat, as much as you can now cause it will save you heaps of hard work later on. After taking off the chunky stuff, cover it again with a good covering, 1-2mm is good, of salt, not iodised stuff (don't know what the iodine does, but its always been that way), kiln dried flossy salt is the best, failing that, cooking salt, Black and Gold will do. Then roll it up again, flesh side to flesh side, and hang in a cool spot in a hessian bag, or at the very least one of those orange onion bags. You can keep them this way for a long long time, I have even had to soak rock hard goat skins to get them soft enough to tan, for over a year.
Page 1 in my thread, Filling in a dull day, page 1, shows how I do them. Its in Varminting/Hunting stories sub forum.
I showed Trev a couple of years ago how to punch off a skin and leave no meat on the skin, did he show you ??![Confused :?](./images/smilies/icon_confused.gif)
Page 1 in my thread, Filling in a dull day, page 1, shows how I do them. Its in Varminting/Hunting stories sub forum.
![Very Happy :D](./images/smilies/icon_biggrin.gif)
I showed Trev a couple of years ago how to punch off a skin and leave no meat on the skin, did he show you ??
![Confused :?](./images/smilies/icon_confused.gif)
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Trying to tan a hide
It stops you from being a bit slow .......
![Rolling Eyes :roll:](./images/smilies/icon_rolleyes.gif)
"Worldwide, iodine deficiency affects about two billion people and is the leading preventable cause of intellectual and developmental disabilities"
https://en.wikipedia.org/wiki/Iodised_salt
cheers, curan
-
- New Member
- Posts: 18
- Joined: Sun Jun 14, 2015 7:05 pm
- Favourite Cartridge: .308
- Location: Seaford Victoria
Re: Trying to tan a hide
I didn't trim it off when it was fresh and the left over stuff has gone hard, have been trying to trim it off but have gone to far and cut through to the fur once or twice.Camel wrote: ↑Tue May 23, 2017 9:18 pm If you haven't already, trim off any chunks of meat and fat, as much as you can now cause it will save you heaps of hard work later on. After taking off the chunky stuff, cover it again with a good covering, 1-2mm is good, of salt, not iodised stuff (don't know what the iodine does, but its always been that way), kiln dried flossy salt is the best, failing that, cooking salt, Black and Gold will do. Then roll it up again, flesh side to flesh side, and hang in a cool spot in a hessian bag, or at the very least one of those orange onion bags. You can keep them this way for a long long time, I have even had to soak rock hard goat skins to get them soft enough to tan, for over a year.
Page 1 in my thread, Filling in a dull day, page 1, shows how I do them. Its in Varminting/Hunting stories sub forum.![]()
I showed Trev a couple of years ago how to punch off a skin and leave no meat on the skin, did he show you ??![]()
I will have a read through it, thanks.
Yes he did show me, but I had was already 3/4 way through. When you say soak them do you mean just with salt?
Thanks.
- MISSED
- Moderator
- Posts: 8377
- Joined: Sat Dec 22, 2007 12:23 pm
- Favourite Cartridge: 20 PPC
- Location: YASS
Re: Trying to tan a hide
Rum is best for soaks
- dashooter
- .338 Lapua Magnum
- Posts: 2805
- Joined: Tue Oct 15, 2013 4:08 pm
- Favourite Cartridge: Wby Magnum's :)
- Location: Deep South Canberra
Re: Trying to tan a hide
Persistence and a very sharp knife on a fine angle being careful. It will take a while though.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: Trying to tan a hide
Or just call that a practice and get another in July???
With a smaller hole in it maybe![](http://emoji.tapatalk-cdn.com/emoji12.png)
Sent from my iPhone using Tapatalk
With a smaller hole in it maybe
![](http://emoji.tapatalk-cdn.com/emoji12.png)
Sent from my iPhone using Tapatalk
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Trying to tan a hide
To trim it now will take a lot of work, you will not be able to rush the job or as you have found, you will get a skin full of holes. When I said about soaking the old dried out skins, it was to get them back to a workable condition, and I just used a garbage bin full of rain water and salt chucked in, cant remember how much, probably 2 or 3 kg for the bin of water.Keith wrote: ↑Wed May 24, 2017 5:35 am
I didn't trim it off when it was fresh and the left over stuff has gone hard, have been trying to trim it off but have gone to far and cut through to the fur once or twice.
I will have a read through it, thanks.
Yes he did show me, but I had was already 3/4 way through. When you say soak them do you mean just with salt?
Thanks.
-
- New Member
- Posts: 18
- Joined: Sun Jun 14, 2015 7:05 pm
- Favourite Cartridge: .308
- Location: Seaford Victoria
Re: Trying to tan a hide
Camel wrote: ↑Wed May 24, 2017 8:44 amTo trim it now will take a lot of work, you will not be able to rush the job or as you have found, you will get a skin full of holes. When I said about soaking the old dried out skins, it was to get them back to a workable condition, and I just used a garbage bin full of rain water and salt chucked in, cant remember how much, probably 2 or 3 kg for the bin of water.Keith wrote: ↑Wed May 24, 2017 5:35 am
I didn't trim it off when it was fresh and the left over stuff has gone hard, have been trying to trim it off but have gone to far and cut through to the fur once or twice.
I will have a read through it, thanks.
Yes he did show me, but I had was already 3/4 way through. When you say soak them do you mean just with salt?
Thanks.
No worries I'll have a nother go tonight. Thanks
- dashooter
- .338 Lapua Magnum
- Posts: 2805
- Joined: Tue Oct 15, 2013 4:08 pm
- Favourite Cartridge: Wby Magnum's :)
- Location: Deep South Canberra
Re: Trying to tan a hide
Not knowing how well the salt penetrated through the meat into the skin, i would probably run another load of salt over the skin just to be sure (once you have the meaty bits off) then follow whatever process you need to for tanning solution (havent done the tanning bit myself).