Marlin 1895cb
-
- New Member
- Posts: 21
- Joined: Mon Sep 12, 2016 9:41 am
- Favourite Cartridge: 3030
- Location: Lismore nsw
Marlin 1895cb
My new varmint gun
Had some pocket money left after good cattle prices this year, then blew 2 rear tyres on my old tractor in December- money gone.
A mate turned up outa the blue between Christmas and new year and bought my old xr250, so I acted quickly before the funds got swallowed by consolidated revenues .
Picked up a new Marlin 1895cb 45-70, 26" octagonal barrel, 9+1 shot a week or so back, was just waiting for some range time before I posted. Ran 50 rnds through on Saturday, trigger a bit heavy, will sort soon. cycled well , 2x 5shot rapid fires, all good. No great groups to crow about (4" @100 prone, iron sights) but gonna put in some bench time Wednesday week should see something better.
Shooting 405gr hawksbry rivers cast bullets over trail boss.
She can put half a pound of lead down range before reloading, not much argues with a 405 grain projectile
Had some pocket money left after good cattle prices this year, then blew 2 rear tyres on my old tractor in December- money gone.
A mate turned up outa the blue between Christmas and new year and bought my old xr250, so I acted quickly before the funds got swallowed by consolidated revenues .
Picked up a new Marlin 1895cb 45-70, 26" octagonal barrel, 9+1 shot a week or so back, was just waiting for some range time before I posted. Ran 50 rnds through on Saturday, trigger a bit heavy, will sort soon. cycled well , 2x 5shot rapid fires, all good. No great groups to crow about (4" @100 prone, iron sights) but gonna put in some bench time Wednesday week should see something better.
Shooting 405gr hawksbry rivers cast bullets over trail boss.
She can put half a pound of lead down range before reloading, not much argues with a 405 grain projectile
- bimbo
- 300 Win Mag
- Posts: 1791
- Joined: Tue Oct 10, 2006 10:34 pm
- Favourite Cartridge: 17HH
- Location: Newcastle, NSW
Re: Marlin 1895cb
Absolutely unreal, if I had the coin spare I would have bought that exact model and cal. Something about the octagonal barrel does it for me
Sent from my D5503 using Tapatalk
Sent from my D5503 using Tapatalk
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Marlin 1895cb
Good bit of gear those Marlins, you would get a bit of barrel droop when she was loaded up.
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Marlin 1895cb
Camel wrote:Good bit of gear those Marlins, you would get a bit of barrel droop when she was loaded up.
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Marlin 1895cb
You gunna put a receiver peep or a tang on it Brett?
(very nice rifle, by the way.... )
(very nice rifle, by the way.... )
Re: Marlin 1895cb
Yeh, the 45/70 is kinda cool. My most carried rifle for the last few years
- stinkitup
- .338 Lapua Magnum
- Posts: 3217
- Joined: Fri Aug 03, 2007 10:46 am
- Favourite Cartridge: 6.5x55
- Location: Lower Hunter Valley
Re: Marlin 1895cb
That is real purdy!
-
- New Member
- Posts: 21
- Joined: Mon Sep 12, 2016 9:41 am
- Favourite Cartridge: 3030
- Location: Lismore nsw
Re: Marlin 1895cb
A creedmoor sight's got me interested, but maybe one of these skinners sight might get be the go
Iron sights for now ( for the "classic" lever action comp I shoot)
Iron sights for now ( for the "classic" lever action comp I shoot)
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Marlin 1895cb
I preferred the Lyman peep sights when I had my lever guns, didn't try any others as there wasn't much available then.
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: Marlin 1895cb
4 inch groups at 100 with iron sites and pills the size of half a house brick. I would be stoked.
Really nice looking rifle
Really nice looking rifle
- bimbo
- 300 Win Mag
- Posts: 1791
- Joined: Tue Oct 10, 2006 10:34 pm
- Favourite Cartridge: 17HH
- Location: Newcastle, NSW
Re: Marlin 1895cb
What trevort said, anything hit with one other those heavy suckers will be knocked into next week
Sent from my D5503 using Tapatalk
Sent from my D5503 using Tapatalk
Re: Marlin 1895cb
Yes those Marlins are sweet. A mate recently picked up a 39A from a deceased estate with a 24 inch octagonal barrel nice timber. I would say it had a restro at some point as it is just too tidy. When i dated it for him we were shocked to find it was built in 1897. The best $300 he ever spent!!! Guns of that era are getting good dollars in the US as are JM stamped Marlins in most every caliber.
I picked up a 44 JM last year that was never fired and sat in a cupboard all its life. To cover the light surface rusting the owner just painted it matt black, stock and all, then off loaded it. I then modified everything as i do.
I picked up a 44 JM last year that was never fired and sat in a cupboard all its life. To cover the light surface rusting the owner just painted it matt black, stock and all, then off loaded it. I then modified everything as i do.
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Marlin 1895cb
Yes they are, but they bring good money in Australia as well, especially the octagonal barrel models. If the rifle your mate got was built in 1897, is not a 39a. The Model 39s and 39As started in 1922 and 1939. It is either a Model 97 (1897-1916) or more likely, considering your comment on it's condition, it is a Model 1897 Cowboy, produced in 1999-2002. The serial number will start with a 01, 00, 99 or 98 if this is correct.Tony Z wrote:Yes those Marlins are sweet. A mate recently picked up a 39A from a deceased estate with a 24 inch octagonal barrel nice timber. I would say it had a restro at some point as it is just too tidy. When i dated it for him we were shocked to find it was built in 1897. The best $300 he ever spent!!! Guns of that era are getting good dollars in the US as are JM stamped Marlins in most every caliber.
It is hard to judge US gun prices against our own. Some are worth more here, some are worth more there. I have a Colt lightning that would be worth double should I sell it in the states. Some guns are worth more here, but not as many. Although a lot of the higher priced guns just sit and don't sell. On average, I would say the Americans pay 10-20% more, generally. It depends on the exchange rate at the time.
If it is a >20yo Model 1897 and is therefore not as old as you thought, don't despair, it is still a desirable rifle. If your mate wants to sell it and it's in good nick, I'll give him $1200 tomorrow. It's worth that if it's clean (bore especially). But he's better off shooting it and loving it for himself.
This link to Marlin Owners might help.....
http://www.marlinowners.com/forum/marli ... t-pdf.html
cheers, curan.
-
- New Member
- Posts: 21
- Joined: Mon Sep 12, 2016 9:41 am
- Favourite Cartridge: 3030
- Location: Lismore nsw
Re: Marlin 1895cb
That's a fine looking set "blued "wood on that 39.
Anyone seen or played with the Chiappa la-322 (marlin 39a copy) 22 lever action?
Do like the look of the case hardened receiver one
Anyone seen or played with the Chiappa la-322 (marlin 39a copy) 22 lever action?
Do like the look of the case hardened receiver one
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Marlin 1895cb
I've only seen photos, and they look nicely made. It's a bit obvious that they've twisted the design of the 39a just enough to bypass patent protection, but what the hell.Backlog wrote:That's a fine looking set "blued "wood on that 39.
Anyone seen or played with the Chiappa la-322 (marlin 39a copy) 22 lever action?
Do like the look of the case hardened receiver one
My only issue is the 18.5" barrel. I would have to scope it for my eyes, as I wouldn't pull a good enough focus on the front bead.