HMR?

trevort · Post by **trevort** » Wed Oct 31, 2007 9:30 pm

its the cz. Ogre is lending me a scope so i can take it to the range sunday while waiting for mine to arrive. hopefully in a fortnight it will feature in a decent story

Simpson · Post by **Simpson** » Wed Oct 31, 2007 9:54 pm

What scope did you buy for it? From the opticzone?

woob614271 · Post by **woob614271** » Wed Oct 31, 2007 9:59 pm

Gee, you blokes are a bad influence; so far you've made me want a 17HMR, a 20 Cal of some sort, a Vortex scope, a Z6 Swarovski 2-12X50 scope, and and and ......
Oh, and I want to build a Rugged #1 in 500 Nitro Express. It's already been costed (too much at present)...

trevort · Post by **trevort** » Wed Oct 31, 2007 10:50 pm

fixed 10 power mil dot elite 3200, yes and you guessed it, from the opticzone (and a swivel harris bipod will be in the box too!)

damien couper · Post by **damien couper** » Thu Nov 01, 2007 2:57 am

very nice trevort

17hmr · Post by **17hmr** » Thu Nov 01, 2007 4:16 pm

nice looking rifle there mate!

Mevo2230 · Post by **Mevo2230** » Thu Nov 01, 2007 4:58 pm

Love those CZ's Trev.

I almost got a CZ HMR but went with the 204 instead.

Enjoy blowing away cute and fluffys with it.

trevort · Post by **trevort** » Fri Nov 02, 2007 9:46 am

Mevo, I agree with your choice, you can add the HMR later

I did something new, I mounted a scope myself. Now to find out if I did it right when I get to the range Sunday.

Jethro · Post by **Jethro** » Sat Nov 03, 2007 9:25 am

Did you fit and lap the rings on the rifle before you fitted the scope trev? I find it stops ring burn on the scope tube

Dont try mounting the scope in the shed with the concrete floor just beckoning as murphy's law may be applied.

Good luck with it anyway. Thats the first step into DYI gunsmithing.

Jethro Again

trevort · Post by **trevort** » Sat Nov 03, 2007 9:52 am

Jethro, I hope Ogre doesnt read this thread, he leant me an old 4 power scope he had and i just screwed it on.

I will ask Shane to lap the rings when I get my own. Plan to head up to Narranderra when I get back from a pending hunting trip. I have 2 weaver T36s (only one is mine) and an A5 stock to deliver so good excuse.

Knackers · Post by **Knackers** » Sat Nov 03, 2007 1:50 pm

Trev, I hope I didnt turn you off with the phrase "you can camp at my place" cause I meant that you could have a bed.

trevort · Post by **trevort** » Sat Nov 03, 2007 6:12 pm

work didnt work out Knackers. i needed to fit it in with a work trip and it just didnt come off.

I do have to see those clients in Jerilderie again soon!!!!

trevort · Post by **trevort** » Mon Nov 05, 2007 11:04 am

I got the HMR on target on Sunday but the conditions were not conducive to finding out anything conclusive about its accuracy potential or which ammo it likes best.

one thing is for certain, the trigger feels like squeezing a sponge. Looks like another rifle has to be "Clancied"

Dr G · Post by **Dr G** » Mon Nov 05, 2007 11:27 am

trevort wrote:one thing is for certain, the trigger feels like squeezing a sponge. Looks like another rifle has to be "Clancied"

that is the standard out of the box CZ 452 trigger experience.

Look at a brooks trigger kit, i know i am. If you go that way i will go you halves on postage

trevort · Post by **trevort** » Mon Nov 05, 2007 11:42 am

how much are they. The rifle basix replacement is $72Us from sinclair. i have a rifle basix trigger on my 6/250. excellent. I'll share the permit and postage costs if you want to get one of those. 10 0z let off, niiiccceee

AusVarmint

HMR?