Quad bike front rack

Scopes, Range finders, Binoculars, Bipods etc etc. Discuss them all here!
Ol 55
.308 Winchester
Posts: 1714
Joined: Mon Aug 02, 2010 7:57 pm
Favourite Cartridge: 20 PPC
Location: Hunter Valley NSW

Quad bike front rack

Post by Ol 55 »

I recently bought a quad that I have set up with a front rack.
There was a couple of prerequisites
1. capable of carrying 2 guns
2. stable enough to use as a shooting rest.
3. have a bit of storage ammo extra cloths etc.

The quad I settled on is a Polaris Sportsman 550 efi
Polaris use a system called lock and ride a rubber expandable
plug that fits into accessory hole in the body of the bike so
the rack is easy to remove to access the fuses and coolant header tank
Attachments
Couple of guns fitted
Couple of guns fitted
photo coupla guns.JPG (144.92 KiB) Viewed 1548 times
spot light bracket <br />must be close to complete as I painted it
spot light bracket
must be close to complete as I painted it
photo Quad rack.JPG (148.26 KiB) Viewed 1548 times
under bonnet area
under bonnet area
photo wiring.JPG (129.14 KiB) Viewed 1548 times
Ol 55
.308 Winchester
Posts: 1714
Joined: Mon Aug 02, 2010 7:57 pm
Favourite Cartridge: 20 PPC
Location: Hunter Valley NSW

Re: Quad bike front rack

Post by Ol 55 »

A bit of storage,
Attachments
photo polaris.JPG
photo polaris.JPG (177.85 KiB) Viewed 1546 times
BP72
22-250 Remington
Posts: 573
Joined: Mon Apr 15, 2013 10:59 pm
Favourite Cartridge: 22-250
Location: Borden WA

Re: Quad bike front rack

Post by BP72 »

That looks pretty good Ol55, gear on the front to break the cold winter breeze , guns held safely and close by .
B4408
.270 Winchester
Posts: 1270
Joined: Sat Aug 31, 2013 6:49 am
Favourite Cartridge: 20VT
Location: Mid North Coast, NSW

Re: Quad bike front rack

Post by B4408 »

Gary, looks good. Whick gun mounts did you use and is that a spotlight mount on the top rail in one photo?
Have done similar but looking to add some features.
Bruce
Ol 55
.308 Winchester
Posts: 1714
Joined: Mon Aug 02, 2010 7:57 pm
Favourite Cartridge: 20 PPC
Location: Hunter Valley NSW

Re: Quad bike front rack

Post by Ol 55 »

Bruce
The racks are Mad Dog and the spotlight bracket is Power beam,
the type that you would mount in the middle of your ute roof
Ol 55
Attachments
photo power beam.JPG
photo power beam.JPG (35.8 KiB) Viewed 1520 times
photo mad dog.JPG
(45.98 KiB) Downloaded 105 times
User avatar
JasonF
7mm Rem Mag
Posts: 1108
Joined: Tue Feb 03, 2009 2:36 pm
Favourite Cartridge: 7mm-08
Location: Canberra region, NSW

Re: Quad bike front rack

Post by JasonF »

Looks great Gary.
User avatar
17hmr
.243 Winchester
Posts: 661
Joined: Wed Jan 24, 2007 4:53 pm
Location: ACT

Re: Quad bike front rack

Post by 17hmr »

great setup!
B4408
.270 Winchester
Posts: 1270
Joined: Sat Aug 31, 2013 6:49 am
Favourite Cartridge: 20VT
Location: Mid North Coast, NSW

Re: Quad bike front rack

Post by B4408 »

Gary, thanks, will check out the Maddogs.

Bruce
User avatar
Harb
.22 WMR
Posts: 122
Joined: Thu Apr 04, 2013 9:30 am
Favourite Cartridge: 204

Re: Quad bike front rack

Post by Harb »

Good setup Gary......very nice workmanship as well......
The lock and ride stuff works well I recon.
I recon you are going to have a good time with that setup :)
Ol 55
.308 Winchester
Posts: 1714
Joined: Mon Aug 02, 2010 7:57 pm
Favourite Cartridge: 20 PPC
Location: Hunter Valley NSW

Re: Quad bike front rack

Post by Ol 55 »

Thanks Harb,
the pics don't do it much justice a bit more work than meets the eye.
Cheers
Ol 55
big G
7mm08 Rem
Posts: 886
Joined: Tue Nov 08, 2011 3:00 pm
Favourite Cartridge: 223 rem
Location: Western NSW

Re: Quad bike front rack

Post by big G »

Good work.
Have you had to make any modifications .?
Cheers Geirge.
Ol 55
.308 Winchester
Posts: 1714
Joined: Mon Aug 02, 2010 7:57 pm
Favourite Cartridge: 20 PPC
Location: Hunter Valley NSW

Re: Quad bike front rack

Post by Ol 55 »

No George have not needed to change anything make sure it is stable enough to use as a rest I put my elbows on the handle bars and the forend on the noodle on the rack
plenty good enough to snipe crows etc at a good distance
Cheers
Gary
big G
7mm08 Rem
Posts: 886
Joined: Tue Nov 08, 2011 3:00 pm
Favourite Cartridge: 223 rem
Location: Western NSW

Re: Quad bike front rack

Post by big G »

Ol 55 wrote:No George have not needed to change anything make sure it is stable enough to use as a rest I put my elbows on the handle bars and the forend on the noodle on the rack
plenty good enough to snipe crows etc at a good distance
Cheers
Gary
Thanks Gary.
B4408
.270 Winchester
Posts: 1270
Joined: Sat Aug 31, 2013 6:49 am
Favourite Cartridge: 20VT
Location: Mid North Coast, NSW

Re: Quad bike front rack

Post by B4408 »

We've used similar to Gary's idea, works well. Make the rest to suit your height.

Bruce
220
.270 Winchester
Posts: 1354
Joined: Mon Feb 09, 2009 9:11 pm
Favourite Cartridge: N/A
Location: Southern NSW

Re: Quad bike front rack

Post by 220 »

B4408 wrote:We've used similar to Gary's idea, works well. Make the rest to suit your height.

Bruce

Yep and as a added bonus the height of mine just happens to be the same as what I can duck down to and fit under branches, so if the rest wont go I know I cant duck low enough anyway. :lol: Should also offer some roll over protection if things go pear shaped.
Post Reply