Factory ammo - split case
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Factory ammo - split case
Hey Raven, we are a pretty smart bunch here, eh ? Where is my photo of the fired split case, just for comparison purposes.
- The Raven
- Ultimate AusVarminter
- Posts: 5945
- Joined: Tue Feb 08, 2011 2:35 pm
- Favourite Cartridge: .270 Win
- Location: The Cloud
Re: Factory ammo - split case
Will do....tomorrow night.Camel wrote:Hey Raven, we are a pretty smart bunch here, eh ? Where is my photo of the fired split case, just for comparison purposes.
-
- .270 Winchester
- Posts: 1354
- Joined: Mon Feb 09, 2009 9:11 pm
- Favourite Cartridge: N/A
- Location: Southern NSW
Re: Factory ammo - split case
If not annealed properly factory ammo/brass will age harden and split.
Had someone ask for some 303/25 brass a while back, knew I had a box from 25years ago of new unfired brass somewhere, dug it out opened the box to find every one split. These were new 303/25 head stamped brass.
Had someone ask for some 303/25 brass a while back, knew I had a box from 25years ago of new unfired brass somewhere, dug it out opened the box to find every one split. These were new 303/25 head stamped brass.
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Factory ammo - split case
Yeah Sean, I remember back in the 70s and 80s there was a lot of older 303/25 ammo that split, stuff that had been made in the 60s, factory new. There was talk of a lot of different opinions as to why it split, poor annealing, brass made with too much zinc in it, some even reckoned that the cordite had something to do with it splitting. I reckoned that it was more than likely poor annealing myself. Pretty much like the 17HMR saga of today.
-
- .270 Winchester
- Posts: 1354
- Joined: Mon Feb 09, 2009 9:11 pm
- Favourite Cartridge: N/A
- Location: Southern NSW
Re: Factory ammo - split case
Reckon your right mate, borrowed a 303 on the weekend to shoot the clunker match at Wodonga, 1920's manufactured ammo, not one split neck among them even after firing. Hangfires and failure to fire was a different story but the brass was still fine after nearly 100 years.
- The Raven
- Ultimate AusVarminter
- Posts: 5945
- Joined: Tue Feb 08, 2011 2:35 pm
- Favourite Cartridge: .270 Win
- Location: The Cloud
Re: Factory ammo - split case
Because Camel asked for it....The 'After' pic. I even tried to take it in the same spot as the original.
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Factory ammo - split case
Thanks mate, didn't do too bad, but as expected didn't split all the way down to the shoulder. Would be a good case to use for a slip case to gage seating depth.
- The Raven
- Ultimate AusVarminter
- Posts: 5945
- Joined: Tue Feb 08, 2011 2:35 pm
- Favourite Cartridge: .270 Win
- Location: The Cloud
Re: Factory ammo - split case
You can have it if you want, otherwise it's a mantle piece to remind me to check factory ammo.Camel wrote:Thanks mate, didn't do too bad, but as expected didn't split all the way down to the shoulder. Would be a good case to use for a slip case to gage seating depth.
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Factory ammo - split case
308 ammo ? If it is, wont be any good to me mate, I have a shit load, but hopefully within the next couple of weeks I wont have a 308, the old Brno is going to become the 25 Camel. Still, it will be a good reminder and conversation piece for you. You could come up with a really good yarn about how it got to be that way, the last round on a long hunt and used it to drop the biggest stag seen by human kind. That kind of yarn.
- DSD
- .270 Winchester
- Posts: 1446
- Joined: Wed Jul 17, 2013 9:06 pm
- Favourite Cartridge: N/A
- Location: In hiding
Re: Factory ammo - split case
Is that an admission that all your stories are full of shit?Camel wrote:You could come up with a really good yarn about how it got to be that way, the last round on a long hunt and used it to drop the biggest stag seen by human kind. That kind of yarn.
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Factory ammo - split case
Nah mate, not me. but as I know that Victorians are generally full of shit, just thought I would prompt him into letting a bit out, a release valve type of thing.