Timberrrrrrrrrrrrrr

Brad Y · Post by **Brad Y** » Sat Feb 21, 2015 1:43 pm

Some timber

Some drawing on some timber

Some roughing out of the timber before putting on the mill

More to come...

kickinback · Post by **kickinback** » Sun Feb 22, 2015 6:09 pm

That certainly qualifies as "starting with a clean slate"

Get into it and post lots of pics please.

Post by **MISSED** » Sun Feb 22, 2015 7:15 pm

Bloody near two days and no additions come we are waiting.

The Raven · Post by **The Raven** » Sun Feb 22, 2015 8:13 pm

MISSED wrote:Bloody near two days and no additions come we are waiting.

That's it! He's finished!

TexNAss · Post by **TexNAss** » Sun Feb 22, 2015 8:17 pm

Finished- it ain't finished until it has a nail driven into it.

Well actually it was being made with a grinder and all- it does look a bit like that fence post stock that's buried away in the old archives.

Tex.

The Raven · Post by **The Raven** » Sun Feb 22, 2015 8:19 pm

TexNAss wrote:Finished- it ain't finished until it has a nail driven into it.

Well actually it was being made with a grinder and all- it does look a bit like that fence post stock that's buried away in the old archives.

Tex.

Looking at his grinder, he's waiting for new discs at Bunnings.

Brad Y · Post by **Brad Y** » Sun Feb 22, 2015 11:17 pm

I am actually. They only had 1 of the 40 grit discs left the wankers. No the mrs spat out bub number 2 today. Staying at home making stocks wasnt worth the risk. Will get onto it more this week hopefully.

TexNAss · Post by **TexNAss** » Sun Feb 22, 2015 11:30 pm

Brad Y wrote:I am actually. They only had 1 of the 40 grit discs left the wankers. No the mrs spat out bub number 2 today. Staying at home making stocks wasnt worth the risk. Will get onto it more this week hopefully.

Well that's an acceptable excuse!

Congrats mate.

Tex.

curan · Post by **curan** » Mon Feb 23, 2015 12:21 am

Brad Y wrote:I am actually. They only had 1 of the 40 grit discs left the wankers. No the mrs spat out bub number 2 today. Staying at home making stocks wasnt worth the risk. Will get onto it more this week hopefully.

Congratulations!

Hope mum and bub are doing well.......

Camel · Post by **Camel** » Mon Feb 23, 2015 8:19 am

Yeah, congratulations of the bub mate. Hope all is going well with the mrs and young'un.

bigfellascott · Post by **bigfellascott** » Mon Feb 23, 2015 9:03 am

Is that laminated?

Congrats on the new addition mate, hope it all goes well for you all.

Post by **MISSED** » Mon Feb 23, 2015 9:04 am

Passable excuse Congrats on the arrival.

Brad Y · Post by **Brad Y** » Mon Feb 23, 2015 11:17 am

Thank fellas. Yes its laminate- I wont risk solid timber on a competition gun for fear of it warping and mucking about with bedding/tune.

Brad Y · Post by **Brad Y** » Mon Apr 27, 2015 7:16 pm

Righto two months later....

Went to Wardys place the other day and spent some time milling surfaces flat and level. Today i got back onto it with the grinder to rough out shapes from the butt and moving forward. Need to get back to his and mill a bit more on it. The hardest bit is trying to get the grip section sorted out in straight lines. A CNC lathe with a cord plugged into my head would be alot quicker. When the action arrives from USA I can do the action area a bit quicker.

Brad Y · Post by **Brad Y** » Mon Apr 27, 2015 7:18 pm

And yes thats my Peppa Pig placemat.... caught

AusVarmint

Timberrrrrrrrrrrrrr

Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr

Re: Timberrrrrrrrrrrrrr