excited

Jacko9 · Post by **Jacko9** » Mon Jul 21, 2014 9:03 pm

Just got these pic's from my gunsmith of a finished product, keen to have it back in my hands!

Here is a picture of the orignal rifle for a reference.

Post by **MISSED** » Mon Jul 21, 2014 9:11 pm

Details man details by the way the bolt seems to have been installed on the wrong side

chris.tyne · Post by **chris.tyne** » Mon Jul 21, 2014 9:15 pm

So is the bloody port,noooooooooooooooo what have they done Jacko,it looks great but its an arse about face rifle

chris.tyne · Post by **chris.tyne** » Mon Jul 21, 2014 9:16 pm

Ohhh yeah forgot to ask,what is it?

Jacko9 · Post by **Jacko9** » Mon Jul 21, 2014 9:22 pm

The gunsmith was Lee Trengrove in QLD, aka Trentech Gunsmithing.

It started life as a CZ 527 lux from frakka on here, it has since had:

A Maddco barrel fitted at 23 inches in with a big caliber hole in it, chambered in 223 rem, 1-10 twist rate.
A stock imported out of america, just a cz 527 classic stock, it's getting a manners when they make them, I spoke to manners earlier and they said they were in prototyping stage.
Cerakoted and microslicked action.
Main trigger adjusted to 2LB, set trigger adjusted to 8 oz.
Skim bedding job.

That's about it I think

crackers17 · Post by **crackers17** » Mon Jul 21, 2014 9:32 pm

Looks nice...what scope are you going to put on it
Lee is great to deal with. .only had a little job done by him A1 services tho

223 fanboy · Post by **223 fanboy** » Mon Jul 21, 2014 9:34 pm

Very pretty Jacko. We all wan't to see how it shoots.

(Hey Keith, all the smilies have their rifles on the wrong side)

Jacko9 · Post by **Jacko9** » Mon Jul 21, 2014 9:34 pm

crackers17 wrote:Looks nice...what scope are you going to put on it
Lee is great to deal with. .only had a little job done by him A1 services tho

Bloody oath Lee is great to deal with, I recommend him to anyone, exceptional service in my opinion, mate, a Kahles Helia C 2.5-10x50, if it's too overbearing, I have a Kahles Helia CT 3-9x42 which was for my 358, but will go on this if need be.

stinkitup · Post by **stinkitup** » Mon Jul 21, 2014 9:38 pm

I thought it was a 527 with a weird bolt

Very nice mate.

curan · Post by **curan** » Sat Jul 26, 2014 12:46 pm

MISSED wrote:Details man details by the way the bolt seems to have been installed on the wrong side

Fixed it for you..........

: Cheaper than a gunsmith to fix!

Now isn't that better?

cheers, curan

frakka · Post by **frakka** » Sat Jul 26, 2014 1:37 pm

Looks good Jacko, glad to see you making use of it.

The Raven · Post by **The Raven** » Sat Jul 26, 2014 2:25 pm

curan wrote:
MISSED wrote:Details man details by the way the bolt seems to have been installed on the wrong side
Fixed it for you..........
CZ527 fixed.jpg
Now isn't that better?

cheers, curan

But now the rifling is wrong! It'll upset the accuracy.

curan · Post by **curan** » Sat Jul 26, 2014 3:57 pm

The Raven wrote:........But now the rifling is wrong! It'll upset the accuracy.

Fit a northern hemisphere barrel then. The coreolis effect is reversed in the southern hemisphere. Should work out fine!

mn1863 · Post by **mn1863** » Sat Jul 26, 2014 9:45 pm

Jacko, looks good really good. I know how long you've been waiting for it, so hope you can get it out real soon. Bolt is on the best side too.

Matt

The Raven · Post by **The Raven** » Sun Jul 27, 2014 8:59 am

curan wrote:
The Raven wrote:........But now the rifling is wrong! It'll upset the accuracy.
Fit a northern hemisphere barrel then. The coreolis effect is reversed in the southern hemisphere. Should work out fine!

Can I swap the barrel around, put the crown at the reciever end....cheaper than a northern hemisphere barrel.

AusVarmint

excited

excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited

Re: excited