Cz527 varmint load development with 32gr z max

Discuss all aspects of Ammunition and Reloading here.
Post Reply
BP72
22-250 Remington
Posts: 573
Joined: Mon Apr 15, 2013 10:59 pm
Favourite Cartridge: 22-250
Location: Borden WA

Cz527 varmint load development with 32gr z max

Post by BP72 »

These are a couple of pics looking for a load using 2206h in my cz527 kevlar varmint in 204 . First pic is four shots using 39 gr sbk , 1st shot on a cold barrel

Other pic was 10 shots using 2206h using 32 gr z max seated to magazine length , 1st shot was 27.6 gr going up in .2 grain increments till a max of 29.4 grain which was slightly over max on adi data , but appeared fine in my rifle .

Seems pretty temperamental ! Not !! Just fill the case , tip out the neck , seat a projectile and shoot the thing !
Attachments
image.jpg
Rotate photo 90 degrees , 28.8 gr was called as pulled
(104.23 KiB) Downloaded 85 times
39 gr sbk
39 gr sbk
image.jpg (104.6 KiB) Viewed 510 times
xa-coupe
.17 HMR
Posts: 155
Joined: Tue Jan 27, 2009 7:12 pm
Favourite Cartridge: 223

Re: Cz527 varmint load development with 32gr z max

Post by xa-coupe »

pretty good group given every shot was different !
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Cz527 varmint load development with 32gr z max

Post by Camel »

Funny critters these 20 cals hey, my 20-222 will put three different projectiles in the same hole 32gn Vmax, Z-max and nosler BT. Ok yeah I know the Hornady bullets are the same, but its my story, Ok :lol:
BP72
22-250 Remington
Posts: 573
Joined: Mon Apr 15, 2013 10:59 pm
Favourite Cartridge: 22-250
Location: Borden WA

Re: Cz527 varmint load development with 32gr z max

Post by BP72 »

xa-coupe wrote:pretty good group given every shot was different !
That's what I reckoned , and a ten shot group . Everyone should have a 204 there just good fun
xa-coupe
.17 HMR
Posts: 155
Joined: Tue Jan 27, 2009 7:12 pm
Favourite Cartridge: 223

Re: Cz527 varmint load development with 32gr z max

Post by xa-coupe »

Had one, sold it to get the 17 ... now I am working out how to get another one :)
BP72
22-250 Remington
Posts: 573
Joined: Mon Apr 15, 2013 10:59 pm
Favourite Cartridge: 22-250
Location: Borden WA

Re: Cz527 varmint load development with 32gr z max

Post by BP72 »

Couple on abusedguns the other day! Just go a new one , you know you want to :D :D
xa-coupe
.17 HMR
Posts: 155
Joined: Tue Jan 27, 2009 7:12 pm
Favourite Cartridge: 223

Re: Cz527 varmint load development with 32gr z max

Post by xa-coupe »

Have to sell something else to get anything these days ... running out of toys that I can do without !!

On the upside, I have a recently retired Ruger 223 that I could rebarrel ...
BP72
22-250 Remington
Posts: 573
Joined: Mon Apr 15, 2013 10:59 pm
Favourite Cartridge: 22-250
Location: Borden WA

Re: Cz527 varmint load development with 32gr z max

Post by BP72 »

Calibre/Item: 204
Make: Ruger
Model: 1B Stainless
Action: Falling Block
Scope/Sights: Rings only
Condition: Excellent
Price: $1950
Advertised: 21/03/2014
Comment: Ruger 204 Just re-barreled by TSE fired exactly 68 development rounds. Is accurate shooter has Kepplinger set trigger. ...
State: NSW
Calibre/Item: 204
Make: Howa
Model: 1500
Action: Bolt
Scope/Sights: Scope not included
Condition: Very Good
Price: $650
Advertised: 29/04/2014
Comment: Has only had 150 rounds put through. Buffalo Camo stock. Scope and mounts not included. Small rub marks on underside of...
State: QLD


There's two to start with
Attachments
image.jpg
Howa
(29 KiB) Downloaded 72 times
image.jpg
Ruger #1
(17.17 KiB) Downloaded 72 times
Teepee
.204 Ruger
Posts: 454
Joined: Thu Jul 25, 2013 6:48 pm
Favourite Cartridge: 20-250
Location: Ararat,Vic

Re: Cz527 varmint load development with 32gr z max

Post by Teepee »

Still got one, but hardly use it since I got my 20 vt.
It does nearly everything I want in a 20 cal and if that's not enough I skip the 204 and go straight to the 20/250.
Gotta love those 20 cals.
User avatar
Flip
.243 Winchester
Posts: 693
Joined: Wed May 19, 2010 6:46 pm
Favourite Cartridge: 20 VT
Location: Adelaide

Re: Cz527 varmint load development with 32gr z max

Post by Flip »

Nice stuff.

I was told when I first got my 204 that some people were having trouble getting accuracy out of their hand loads that was even close to factory. It didn't to take me Long to find out that was BS!.


Mine shoots 32 V max real nice 40's are ok I think on the edge of stability maybe. Finally got to try some 39 SBK's they shoot great no hype there that's for sure. I also gave some 35 Bergers a try the other week end and they shot extremely well have not tried them on the furry critters yet. I've been using BR8208 and been happy with.

Can't wait to get the Vartarg built......... Might be a while but I will get there.

All the best and thank for sharing.

Flip
Post Reply