Brooks Trigger Kit

czt3 · Post by **czt3** » Mon Jul 23, 2007 10:19 am

For those who bought the brooks, how long did delivery from the US take. I've beeen waiting 3 weeks now

cheers

daisy · Post by **daisy** » Mon Jul 23, 2007 2:08 pm

czt3 wrote:For those who bought the brooks, how long did delivery from the US take. I've beeen waiting 3 weeks now

cheers

I think it was about 3 weeks and I received an email saying sorry for the delay my order has been shipped.

Buy the look on the RF Central forum he seems to be in one of his slow periods . I don't think it is his main source of income and just a sideline that he does from time to time. Just my opinion.

Daisy

chris.tyne · Post by **chris.tyne** » Mon Jul 23, 2007 8:25 pm

i have replaced the front bottom pin with a 1/16 drill bit shank as the pin on 1x Bruno mod2,2xcz452 and it has worked a treat.

czt3 · Post by **czt3** » Tue Jul 24, 2007 3:57 pm

daisy wrote:
Have a 3/32 x 3/4 roll pin handy as the front pin can get bent easily.

Got my kit mate!!! where will i get the roll pin you speak of in the above post daisy???

daisy · Post by **daisy** » Wed Jul 25, 2007 6:39 am

czt3 wrote:
daisy wrote:
Have a 3/32 x 3/4 roll pin handy as the front pin can get bent easily.

Got my kit mate!!! where will i get the roll pin you speak of in the above post daisy???

Well it took me awhile to fine one. I went to the local auto parts store in Pambula with no luck. Then I was in Canberra and thought should find one here, but 1 Bunnings and 3 different auto parts stores and no luck.
I got one in the auto parts store in Eden. So I guess it's just a matter of finding out who has them, all the auto stores had boxes behind the counter that they look in.

If you can't get one near you let me know and I'll send you one.

daisy

wb243 · Post by **wb243** » Wed Jul 25, 2007 9:25 pm

Daisy

Excuse my ignorance but wtf is a roll pin?! is it the thing you punch the pin out with or a replacement pin in case the original gets bent?

Thanks!

Ned Kelly · Post by **Ned Kelly** » Wed Jul 25, 2007 10:05 pm

g'Day wb243,
it is a hollow pin usually made from sheet steel and formed into a tight coil. It has "give" in it to allow easy fitting but takes up the slack in the hole for a snug fit. Used in light duty jobs.
Cheerio Ned

daisy · Post by **daisy** » Wed Jul 25, 2007 10:05 pm

wb243 wrote:Daisy

Excuse my ignorance but wtf is a roll pin?! is it the thing you punch the pin out with or a replacement pin in case the original gets bent?

Thanks!

It's a replacement pin, but they are not solid they are a rolled piece of steel with a slit length wise . Some have a slight taper on them.
hope I put that right.

daisy

czt3 · Post by **czt3** » Sat Jul 28, 2007 1:40 pm

I got a pin from local Auto -Pro. But thanks for the offer to send me one daisy. I appreciate it

Cz

AusVarmint

Brooks Trigger Kit

Time frame

Re: Time frame

daisy