Beeman spares

[Lewis Reinhold]

I still have some springs,seals etc left over that may be of interest. Here's a list

Springs (mainly JM) for

Anschutz BSA Diana FWB HW and many others

JM spring kits for Diana FWB HW

Piston seals for BSA Diana FWB GAMO HW

Piston bumpers for FWB 65/80/90 and 150/300 Anschutz 250/380

Breech seals for FWB 65/80/90 Anschutz 250/380 HW BSA

Just let me know.

I also have Maccari Tar and Moly

Sportsmatch and Hawke mounts.

Lewis

Lewis

[daisy]

Hey Lewis You wouldn't have a fill adapter for a Mako would you. If not do you know where I could get one? Or is there any other fitting to change over to, as gun and adapter.

Daisy

[Lewis Reinhold]

Hey Lewis You wouldn't have a fill adapter for a Mako would you. If not do you know where I could get one? Or is there any other fitting to change over to, as gun and adapter.

Daisy

Sorry but no Dave.

There were about three different adaptors for the the MAKO.

Best bet is to contact Daystate who made it with the S/N.

Lewis

[fenring]

Hi Lewis.

What FWB Sport parts do you have?

Scott

[Lewis Reinhold]

Hi Lewis.

What FWB Sport parts do you have?

Scott

Hi Scott,

Piston seals,springs,screws,odds and sods.

Sportsmatch mounts.


Lewis

[curan]

Hi Lewis,

I just sent a PM with some questions.

Thanks, curan.

[curan]

Hi Lewis,

I just sent a PM with some questions.

Thanks, curan.

My spare parts arrived this morning thanks to Lewis, and he threw in a bonus set or targets to boot (typical, really)

Hopefully I won't need them for quite some time, but at least I got them if I do need them.

Thanks again to Lewis for the help and advice.

cheers, curan

[Chris L]

Bumped, because it should be

Chris

[Lewis Reinhold]

Bumped, because it should be

Chris

Thanks Chris,

All the Norica and GAMO parts are gone with BSA next to go.

FWB Sport stuff is light on as are some HW.

Once it's gone,that's it....sadly.

[curan]

Hi Lewis,

On the air target section you will notice some photos of an FWB300 I've picked up.

What parts do you still have for these, and what would you advise me to grab while I have the chance?

Thanks, curan

[Lewis Reinhold]

Hi Lewis,

On the air target section you will notice some photos of an FWB300 I've picked up.

What parts do you still have for these, and what would you advise me to grab while I have the chance?

Thanks, curan

Hi Wayne,

Well done!

I'm pretty sure I can do

JM springs,piston buffers and breech seals. I don't have any piston rings though which you need.

Also have ratchet rods and other parts plus FWB Special Grease.

Lewis

[RayG]

Hi Lewis,

On the air target section you will notice some photos of an FWB300 I've picked up.

What parts do you still have for these, and what would you advise me to grab while I have the chance?

Thanks, curan

Curan,
Graeme Forbes (Forbes wholesale) can help you with a piston ring for your FWB 300,
I recently got hold of a 300S myself and Lewis sorted me for the rest of the rebuild bits.
Ray.

[curan]

.....JM springs,piston buffers and breech seals.........Also have ratchet rods and other parts.....

Thanks Lewis, I was hoping you would still have some bits.

I'll be in touch by PM and we'll get something sorted.

regards, curan.

[curan]

Curan,
Graeme Forbes (Forbes wholesale) can help you with a piston ring for your FWB 300,
I recently got hold of a 300S myself and Lewis sorted me for the rest of the rebuild bits.
Ray.

Hi Ray,

Thanks for that.

From your comment can I infer that you have rebuilt the 300S yourself, or did you find someone local?

I tend to grab "emergency" spares and hold them until needed (experience tells me that if you have the parts, you don't seem to need them), but if they are a fairly simple rebuild for someone with the skill, I could consider having a go.

regards, curan

[curan]

....... but if they are a fairly simple rebuild for someone with the skill, I could consider having a go....

Well, it looks like I can do it myself, after a quick bit of research (I love utube).

This is the link I just viewed if anyone is interested......

http://www.youtube.com/watch?v=nimz5d8RERQ

cheers, curan