If you were buying a shotgun...

Talk about your Varmint Rifles and other firearms here!
Post Reply
Andries
New Member
Posts: 52
Joined: Wed May 05, 2010 8:37 pm
Favourite Cartridge: 22-250
Location: Mornington Peninsula VIC

If you were buying a shotgun...

Post by Andries »

I don't have one in the safe, and am wondering what you would recommend.

I have done a few fox drives with borrowed bang-sticks, and like the over/under configuration.

Might do some clay targets...might not !

Will do some fox drives in future.

Might shoot some ducks... might not !!

Should I get one that can do 'steel shot' ?
Should I get one with çhokes ??

Don't want to spend too much...........

Cheers.
cam_mackps2
.222 Remington
Posts: 364
Joined: Tue Aug 08, 2006 3:55 pm
Location: Mansfield

Re: If you were buying a shotgun...

Post by cam_mackps2 »

I would answer Yes to both your questions.
If i was buying a shotgun it would be the Franchi Pheonix.
There is a review in the latest 'Australian Shooter' magazine.
I was going to buy one before duck season this year but couldn't afford to.
Should be less than $1500.
The main reasons i would buy one is it is imported by Beretta Australia so you get great support.
And Beretta Australia offer a free fitting service where they will modify the stock to suit the shooter.

The sub-$1000 shotguns just don't seem to be all that great.
Don't get me wrong they are good but some leave a lot to be desired.
I have a yildiz 12ga that cost me $900 6yrs back. The bluing just isn't lasting but it functions well.
danob73
New Member
Posts: 5
Joined: Sun Jul 22, 2012 5:17 pm
Favourite Cartridge: 223 rem

Re: If you were buying a shotgun...

Post by danob73 »

I got a rizzini hombra sporter 30" barrel comes with inter changeable chokes cost around $1600 use it for clays and field shooting still waiting on the paper work once I get it I'll know how it shoots but seems to fit ok which is the main thing I think.
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: If you were buying a shotgun...

Post by trevort »

last Shooters journal had an article "5 shotguns under $5000" The cheapest was the Lanber. Thats the one I bought last year. The 2097 has a steel mechanism and is a little heavier and dearer than the 2087 with the alloy. My research told me that was the cheapest of the quality european guns before you looked at the turkish stuff.

Gun Emporium in Tullamarine import them directly and were $200 cheaper than anywhere else. Highly recommended
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: If you were buying a shotgun...

Post by fenring »

Get a steel proofed gun - so you can shoot ducks if you want.

Get one with interchangeable chokes.

Go for 3" chambers so you can shoot any load on the market.

Other than that, it comes down to your budget.
Ol 55
.308 Winchester
Posts: 1714
Joined: Mon Aug 02, 2010 7:57 pm
Favourite Cartridge: 20 PPC
Location: Hunter Valley NSW

Re: If you were buying a shotgun...

Post by Ol 55 »

I would not go past a Miruko mod 10 grade 1 sporter I have see people trying to wear them out with no success.
Ol 55
User avatar
hobbygodz
.22 WMR
Posts: 134
Joined: Wed Dec 22, 2010 5:55 pm
Favourite Cartridge: 12g

Re: If you were buying a shotgun...

Post by hobbygodz »

Yep, it's a +1 from me regarding Miroku Mk10 sporter. Love mine. Miroku's have an unbeatable reputation of reliabilty and longevity. IMHO the best you 12g shottie you can get for $2k. I also have a Mk10 in the trap version which I only use for trap. The sporter is the "jack of all trades" in that you can use it for any clay sport and hunt with it as well. Miroku's sold in Aus have 3" chambers and are steel shot proofed.
User avatar
The Raven
Ultimate AusVarminter
Posts: 5945
Joined: Tue Feb 08, 2011 2:35 pm
Favourite Cartridge: .270 Win
Location: The Cloud

Re: If you were buying a shotgun...

Post by The Raven »

As someone who only got back into shooting in recent years I faced the same dilemma when it came to shotgun choice.

All I can suggest is to figure out what features you want and, roughly what budget you have to work with. Once you know the requirements: research, research, research. You'd be surprised to find out who really puts together that Brand X firearm. For example, Stoeger and Boito have identical catalogs and firearms, only the name of each model changes...

Every firearm purchase is an individual thing.

In my case, I went 'cheap' and bought a Stoeger Condor Deluxe O/U (identical to Boito). It had all the features I wanted, a good price, and was supported by Berretta. For me, it'll do what I want (a bit of everything) and is unlikely to wear out or fail (at my rate of use).

Yes, there can be a benefit in buying a lower end firearm to start with. Then again, many who buy cheap quickly upgrade to something better (when the bug bites). :wink:
Andries
New Member
Posts: 52
Joined: Wed May 05, 2010 8:37 pm
Favourite Cartridge: 22-250
Location: Mornington Peninsula VIC

Re: If you were buying a shotgun...

Post by Andries »

Well it's taken me a while.........

Put down a deposit on the Franchi Phoenix today.

Will be picking it up in a week !!!!
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: If you were buying a shotgun...

Post by Camel »

Looking at when you started your search, Ive come to the conclusion that you don't like to rush your decisions. Good onya mate, hope you enjoy it. :D
Andries
New Member
Posts: 52
Joined: Wed May 05, 2010 8:37 pm
Favourite Cartridge: 22-250
Location: Mornington Peninsula VIC

Re: If you were buying a shotgun...

Post by Andries »

Thanks Camel.....LOL

Main reason for the delay was waiting for fox drives to start up again to bring a shotgun back on the 'must have' radar.

Also saving a few $ that I didn't spend other 'toys' !!!!

Will give report when I've put a few rounds (or is that shells?) through it.
Plowboy
7mm Rem Mag
Posts: 1021
Joined: Thu Jul 16, 2009 11:06 pm
Favourite Cartridge: .223
Location: Wagga

Re: If you were buying a shotgun...

Post by Plowboy »

Andries wrote:Thanks Camel.....LOL

Main reason for the delay was waiting for fox drives to start up again to bring a shotgun back on the 'must have' radar.

Also saving a few $ that I didn't spend other 'toys' !!!!

Will give report when I've put a few rounds (or is that shells?) through it.
Where are you from Andries? You don't have anything in your location
Andries
New Member
Posts: 52
Joined: Wed May 05, 2010 8:37 pm
Favourite Cartridge: 22-250
Location: Mornington Peninsula VIC

Re: If you were buying a shotgun...

Post by Andries »

Hey Camel,

Mornington Peninsula, south of Melbourne in VIC........I have been known to travel though. :)
Andries
New Member
Posts: 52
Joined: Wed May 05, 2010 8:37 pm
Favourite Cartridge: 22-250
Location: Mornington Peninsula VIC

Re: If you were buying a shotgun...

Post by Andries »

Well picked it up today, to say I am impressed is an understatement !

The gun looks great, and I can't wait to unleash it tomorrow.

Will get some photos up here if I can work out how to get them off the phone and upload them.

Now to read the manual over a Coopers Sparkling Ale...cheers all.

:D
Post Reply