Winchester's forthcoming .17WSM

Talk about your Varmint Rifles and other firearms here!
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: Winchester's forthcoming .17WSM

Post by fenring »

User avatar
Flip
.243 Winchester
Posts: 693
Joined: Wed May 19, 2010 6:46 pm
Favourite Cartridge: 20 VT
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by Flip »

Your right there to Camel. And why not try to cash in on the popularity as well.

It will appeal to some People more than others.I still love my 17 HMR but now I have the 17 HH, this new cartridge dose not appeal to me but I am going to reload for the HH. So the price of factory 17 HH dose not bother me to much ($34.00a pack of 25 about $1.30 a pop) the 17HMR is running about $10 to $15 cheaper than that around here depends where and what brand but basically 60 cents a shot

If the Winchester is cheaper that the 17HH and only slightly more expensive than HMR it may be quite popular. Horses for courses.

It will be interesting to see what the ammo goes for here.

Sure will be a good fox round.

Flip
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by andrewk »

Woo Hoo! I'll say it again, what the HMR should have been!
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by andrewk »

I wonder if re-chambering existing HMR rifles would be possible?...
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: Winchester's forthcoming .17WSM

Post by fenring »

Doubtful.
xa-coupe
.17 HMR
Posts: 155
Joined: Tue Jan 27, 2009 7:12 pm
Favourite Cartridge: 223

Re: Winchester's forthcoming .17WSM

Post by xa-coupe »

wonder if it'll stay cat A in vic? Starting to get well into centrefire ballistics.
User avatar
Flip
.243 Winchester
Posts: 693
Joined: Wed May 19, 2010 6:46 pm
Favourite Cartridge: 20 VT
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by Flip »

I was informed here in SA and some one correct me if Im wrong, that the reason the 17 HMR is cat B here is due to the wording of our firearms act stating that class A is "22 Rimfe" and any thing else is class B.
User avatar
fenring
Moderator
Posts: 2607
Joined: Sun Jan 07, 2007 2:50 pm
Location: Central Victoria, Australia

Re: Winchester's forthcoming .17WSM

Post by fenring »

I think it will probably stay Cat A in Victoria, unless they want to amend the legislation, or the CCP wants to make a declaration (doubtful as a 12g shotgun with slugs is still Cat A....)
category A longarm means any of the following-

(a) an airgun;

(b) a rimfire rifle (other than a semi-automatic rimfire rifle);

(c) a shotgun (other than a pump action or semi-automatic shotgun);

(d) any combination of a shotgun and rimfire rifle;
xa-coupe
.17 HMR
Posts: 155
Joined: Tue Jan 27, 2009 7:12 pm
Favourite Cartridge: 223

Re: Winchester's forthcoming .17WSM

Post by xa-coupe »

I hope so ...
we need to ask someone to do a 7.62x51 in rimfire :)
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by andrewk »

Flip wrote:I was informed here in SA and some one correct me if Im wrong, that the reason the 17 HMR is cat B here is due to the wording of our firearms act stating that class A is "22 Rimfe" and any thing else is class B.
a few years back i was going through my reg certs for my guns cos a few had mistakes, i noticed the hummer i had was Cat B. I was told by Firearms Branch it was because of the velocity the hummer produced. 17mk2 is Cat A.

this new one will definately be Cat B in south oz... but who gives a sh!t

my only problem now is do i use the 17cal Kreiger blank for a 17Honet build or go for a 17mk4? cos i'm so getting one of these!
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by andrewk »

or maybe if i can get a reamer for the 17wsm the kreiger can go on an action for it... but what?

it looks like it will be really close to the 17Hornet for external dimesions...
Attachments
on the left is the HMR next to the 17Hornet
on the left is the HMR next to the 17Hornet
cartricomimage.jpg (51.77 KiB) Viewed 848 times
in the middle is the HMR next to the 17WSM on the right
in the middle is the HMR next to the 17WSM on the right
file-18.jpg (32.23 KiB) Viewed 848 times
glennasher1
New Member
Posts: 73
Joined: Tue Feb 26, 2008 7:27 am

Re: Winchester's forthcoming .17WSM

Post by glennasher1 »

andrewk wrote:I wonder if re-chambering existing HMR rifles would be possible?...
Only if you're shooting a Contender Carbine. It's too fat, too long, and generates too much pressure for typical HMR rifle, which is just a rebarrelled .22 Magnum.

To make it work, it'll have to have a Hornet-length action, like a Browning A bolt, CZ527, Ruger 77/17Hornet or the Zastava action, and THOSE would have to be converted to rimfire, magazines made, etc.

I expect to see THOSE actions in .17 Hornady Hornet, but not the rimfire, development costs for the Hornet are nil compared to the costs of reworking an action to another firing system. So far, it looks like Savage is the only one stepping up to the plate, with some bastardized version of their already bastardized M25. It's called the Model B (presumeably for Bastard :D )
mn1863
.222 Remington
Posts: 308
Joined: Sun Mar 04, 2007 10:53 am
Location: ACT

Re: Winchester's forthcoming .17WSM

Post by mn1863 »

Ive got a Contender Carbine and whilst it would take the extra pressure, I'm not sure you could just rechamber it as it looks like the new case has a wider base. If it does then there could be issues with the alignment of the firing pin. Would be easier to rechamber to the 17hh as no issues with the centre fire alignment.
User avatar
stinkitup
.338 Lapua Magnum
Posts: 3217
Joined: Fri Aug 03, 2007 10:46 am
Favourite Cartridge: 6.5x55
Location: Lower Hunter Valley

Re: Winchester's forthcoming .17WSM

Post by stinkitup »

might make a nice Martini though by the looks .... anyone with a 17 cal barrel they don't want I'll take donations :lol:

Ryan
User avatar
andrewk
7mm Rem Mag
Posts: 1164
Joined: Tue Dec 16, 2008 8:34 pm
Favourite Cartridge: 222rem
Location: Adelaide

Re: Winchester's forthcoming .17WSM

Post by andrewk »

well i've been looking at getting a CZ527 for my 17 hornet build but I might try the 17WSM with it first. If its no good ream it out the 17HH.
Post Reply