222 load data

mitchellchandler_au · Post by **mitchellchandler_au** » Fri Jun 22, 2007 9:24 pm

Hi all,

I just got myself a BSA Hunter in 222 (thanks KIWI for the help with taking out the bolt) I plan on using the nosler 52 HPBT SHOTS projectiles in it. What sort of powder do you reccomend I try in it?

Thanks for your responses.

Rinso · Post by **Rinso** » Fri Jun 22, 2007 9:37 pm

mitchellchandler_au,

Try 2206, 2206H or 2208 you should have at least one of those as an F Class shooter.

You can also use Benchmark 1 or 2.

2207 & 2219 will also work well.

Not much help really now that I look at it.

run the one you use in your target gun and you can use it to get rid of those bits of powder left in tins.

cheers
Rinso

flyer · Post by **flyer** » Fri Jun 22, 2007 10:02 pm

Agree with Rinso on the ADI powders, I've also had lots of luck with W748.

Minivinne · Post by **Minivinne** » Fri Jun 22, 2007 10:04 pm

is the BT in HPBT Boat Tail or Ballistic Tip

Simpson · Post by **Simpson** » Fri Jun 22, 2007 10:09 pm

Hollow Point Boat Tail

Anyone know what packsize they come in and how much dollars?

Model70 · Post by **Model70** » Fri Jun 22, 2007 10:09 pm

Minivinne wrote:is the BT in HPBT Boat Tail or Ballistic Tip

Boat Tail champ, quite a good projectile too I might add!

Minivinne · Post by **Minivinne** » Fri Jun 22, 2007 10:24 pm

thanks i thought thats what it was

Rinso · Post by **Rinso** » Fri Jun 22, 2007 11:25 pm

flyer,

I agree W748 is outstanding as is W760.
I stopped using them when supply became patchy, nothing worse than having all your loads for a powder you cant get consistantly

cheers
Rinso

czt3 · Post by **czt3** » Sat Jun 23, 2007 7:48 am

Simpson wrote:

Anyone know what packsize they come in and how much dollars?

a 250 pack should be less than $60.00

The Kiwi · Post by **The Kiwi** » Sat Jun 23, 2007 8:56 am

I use BM2 in both my treblys. works fine.

The Kiwi.

flyer · Post by **flyer** » Sat Jun 23, 2007 4:25 pm

Rinso,

I heard that there was a problem getting them from various people, but everytime I needed some I always found some (the W748 anyway). If your ever need any let me know, I come out your way a bit.

Flyer

Rinso · Post by **Rinso** » Sat Jun 23, 2007 5:01 pm

flyer,

Thanks for the offer mate but I have changed over to ADI powders for everything mainly because I can get it anywhere

cheers
Rinso

mitchellchandler_au · Post by **mitchellchandler_au** » Sat Jun 23, 2007 6:07 pm

Thanks for the info guys,

I think I will try 2208 because it is all I use in my 6br,308 and 223 these days.

Thanks again

Post by **kjd** » Sat Jun 23, 2007 6:15 pm

Bm2 and 50 grains Nosler SHOTS or BT's and a near max load is what the Dr orders with my tre` duece

bushchook · Post by **bushchook** » Sun Jun 24, 2007 1:01 am

2208 is a bit on the slow side for the .222 . 2207 gives better velocity I think you'll find . Will be trying 2206H in mine . A touch slower than IMR 4895 which gives very good velocity in the .222 .
The ADI (and Uncle Nick's) loads for the .222 with 2206H are a joke I think (slow) . Will soon find out for sure .

AusVarmint

222 load data

222 load data