Airgun spares

[Lewis Reinhold]

I have Maccari springs for just about everything.You'd be crazy not to carry spares.Here's your chance.

Beeman,BSA,FWB,Diana,Weihrauch,Gecado,Cometa,Webley,Anschutz you name it almost

Little springs $30 Big springs $40 Monsters $50

Lewis

[deadkelly]

g'day mate i got a weihrauch hw 80 22 cal . what go fast bits do you have for that . i've read that there easy to to up grade the power ??? i'll get some spares for sure .
also know of m8's that have a chinese fast deer 177 side lever's both need springs & seals & one needs a trigger / sear set up . thanks oliver .

[LoneRider]

gday lewis,you wouldnt have a piston cap/seals for a bsa meteor 177 would you ?


sean

[Lewis Reinhold]

g'day mate i got a weihrauch hw 80 22 cal . what go fast bits do you have for that . i've read that there easy to to up grade the power ??? i'll get some spares for sure .
also know of m8's that have a chinese fast deer 177 side lever's both need springs & seals & one needs a trigger / sear set up . thanks oliver .

I have some new Maccari springs in stock at $40 each.
The big trick for power in the HW80 is to get just the right fit of piston seal.I have piston seals and breech seals in stock plus proper airgun grease.

You should be able to get 20FP plus out a .22.

I could probably do a spring for the Fast Deer but that's it unless I can create a synthetic seal for it.I think they take an FWB breech seal.

PLEASE be very careful with FD!!! They can trap unwary fingers.Always hang onto the sidelever when loading.

[Lewis Reinhold]

gday lewis,you wouldnt have a piston cap/seals for a bsa meteor 177 would you ?


sean

I would have.I asume yours is the typical Meteor with an O ring for a piston seal? When you say 'cap' do you mean a piston head too?

Lewis

[LoneRider]

i thaught they were one piece ,but if its seperate i'll take a seal

[Lewis Reinhold]

i thaught they were one piece ,but if its seperate i'll take a seal

What's the S/N of your Meteor? Just the two letter prefix is all I need.

[LoneRider]

i thaught they were one piece ,but if its seperate i'll take a seal

What's the S/N of your Meteor? Just the two letter prefix is all I need.

NG

can you do CC over the phone lewis ?

[Lewis Reinhold]

i thaught they were one piece ,but if its seperate i'll take a seal

What's the S/N of your Meteor? Just the two letter prefix is all I need.

NG

can you do CC over the phone lewis ?

Thanks.It's a regular Meteor.
One piston ring $5 and one piston buffer $10. Breech seal is $10 too.
Moly Grease $10/tub.
Spring $30

Thanks,
Lewis

[LoneRider]

ok,i'll take all that.
just to make postage worth it and to put somethin in the bloody big box
pm me your ph no and i'll ring through the card details on monday.

[Lewis Reinhold]

ok,i'll take all that.
just to make postage worth it and to put somethin in the bloody big box
pm me your ph no and i'll ring through the card details on monday.

PM coming.
Thanks,
Lewis

[Dennis La Varenne]

Lewis,

I have three Webley Mark III air rifles - two in .22 and one in .177. I also have a BSA No2 Giant in .22 and a No 1 model L in .177. What chance of Maccari kits for these plus piston seals ?????

Is it worth while my also getting a spare Maccari kit for my (intended) R10 too??? Is installing a Maccari spring kit into an R10 at home suicidal or should it be done by an expert???

[Lewis Reinhold]

Lewis,

I have three Webley Mark III air rifles - two in .22 and one in .177. I also have a BSA No2 Giant in .22 and a No 1 model L in .177. What chance of Maccari kits for these plus piston seals ?????

Is it worth while my also getting a spare Maccari kit for my (intended) R10 too??? Is installing a Maccari spring kit into an R10 at home suicidal or should it be done by an expert???

Dennis,
Jim Maccari does not offer spring kits for any of those but I can certainly do his springs for the MK3's.Price $40 each posted.
I think I have a couple of piston seal assemblies too at $30 each.

I think the BSA's both have the usual BSA leather seal and I have some at $30 each. Do your BSA's have a sinle spring or double?

It's worth getting a spares kit for the R10.The R10 can be a PITA if the scope rail screws don't budge.Aside from that,it's your usual potentially dangerous spring gun to work on.I always use a compressor on anything I work on although others put their airguns together without.I'm the first to admit that working on airguns is not rocket science but it's amazing just how many make a complete botch of it.
Would it be suicidal for me to put together an IKEA bookcase? Probably yes.
Lewis

[Dennis La Varenne]

Lewis,

Together with that 4x32 Beeman scope from your other post ($100 posted), I will take all of the below, viz;

1. 2 x Giant and 2 x L model of the leather seals for my BSAs = $120;
2. 3 x springs for the Webleys = $120;
3. 3 x Webley piston seal assemblies = $90;
4. Spares kit for the R10 (???price please).

If you let me know the cost of a spares kit for the R10, I will EFT the whole amount into your account as usual.

My BSAs have single springs on both. I think the Giant should have a double spring from my reading of my book - BSA, The Golden Years, so it is probably not original. Do you have any spare BSA springs perhaps ????

Would you mind emailing me the total cost for all the above please?

[Lewis Reinhold]

Lewis,

Together with that 4x32 Beeman scope from your other post ($100 posted), I will take all of the below, viz;

1. 2 x Giant and 2 x L model of the leather seals for my BSAs = $120;
2. 3 x springs for the Webleys = $120;
3. 3 x Webley piston seal assemblies = $90;
4. Spares kit for the R10 (???price please).

If you let me know the cost of a spares kit for the R10, I will EFT the whole amount into your account as usual.

My BSAs have single springs on both. I think the Giant should have a double spring from my reading of my book - BSA, The Golden Years, so it is probably not original. Do you have any spare BSA springs perhaps ????

Would you mind emailing me the total cost for all the above please?

Thanks Dennis,
PM sent.

Lewis