bought into the hype

17hmr · Post by **17hmr** » Mon May 02, 2011 6:18 pm

well... its been awhile since i last bought a rifle, but just paid for a cz varmint, kevlar stock in .204. anyone got one? recommend any loads? cant wait to give the foxes some lead from a distance.

trevort · Post by **trevort** » Mon May 02, 2011 7:27 pm

lovely!

use rem 7 1/2 br primers, between 27.something and 28gns of 2206h(start around 27.2 and go up in .2) and 39gn sbks and go for your life

Post by **MISSED** » Mon May 02, 2011 8:05 pm

Nice rifle mate in a cal that you will enjoy and the foxes won`t.I very nearly bought one for Mrs Missed but the scope height and low cheekpiece made it hard for her to get a good sight picture.The trigger was bloody awful ex factory with more creep than a Kings Cross night club.It was an easy fix a couple of minutes on google and a bit of tool time had it very very nice.
My choice would be for 32 grain projies launched as fast as you can.(28 grains of 2206h is a good start point)Sighted 1 inch high at 100m will put you on fur with no hold over out to 300m.In fact apart from the wind most of the shots I have seen miss are overs rather than unders Splatter effect is rather dramatic.

Sig · Post by **Sig** » Wed May 04, 2011 11:31 pm

17hmr wrote:well... its been awhile since i last bought a rifle, but just paid for a cz varmint, kevlar stock in .204. anyone got one? recommend any loads? cant wait to give the foxes some lead from a distance.

Saw a mate's for the first time about two weeks ago. I wanted the same in .223 but Winchester Australia don't import them.

A tidy unit and will be very capable for your purpose!

Dr G · Post by **Dr G** » Fri May 13, 2011 1:26 pm

Welcome to the club 17hmr

You wont regret the 204.

In the CatKiller I use 27.8gn 2206H, 39gn Sierra Blitzkings, Prepped remington brass and CCI BR-4 Primers. Off a bench this gives me consistant 11mm groups at 200m.

Like Trev said just about any load from 27.2 up to 28 will give you good accuracy, this is a very forgiving cartridge for the hand loader

Dr G

17hmr · Post by **17hmr** » Fri Jun 10, 2011 10:02 pm

mmm... can the foxes say cheese?

only problem is i need to get higher mounts to clear the bolt.

Post by **MISSED** » Sat Jun 11, 2011 7:23 am

I like that Paul very nice great choice of Rifle calibre and spotlight my only suggestion would be to give 220 a yell and grab one the BR Harris Bipods He has on special at the moment.As Trevort will tell you these shorter leg bipods are awesome when your shooting over the bonnet.

Ol 55 · Post by **Ol 55** » Tue Jul 05, 2011 11:24 am

Not to sure of the dove tail width for your mount but I know on the old ZKW465 has a 5/8 and I used Tikka T3 mounts they look to be higher than the ones you have now. Welcome to the Terrific 20's I had not ran the barrel in on my tact 20 and was in love and now looking at a 20 PPC to stretch a bit further. I think I will sell my 220 swifts and 223.

Ol 55

johno1 · Post by **johno1** » Tue Jul 05, 2011 4:47 pm

Ive got a set of CZ rings here, are yours standard size. I can give you a measurement from the bottom of the lower ring to base.

John

17hmr · Post by **17hmr** » Tue Jul 05, 2011 5:05 pm

hey guys, i bought leapold rings to suit the rifle and 30mm tube the next day. Missed, i now have a 6 inch bipod on the rifle. you are right, makes all the difference when shooting off the bonnet

Post by **MISSED** » Tue Jul 05, 2011 6:19 pm

Ol 55 wrote:Not to sure of the dove tail width for your mount but I know on the old ZKW465 has a 5/8 and I used Tikka T3 mounts they look to be higher than the ones you have now. Welcome to the Terrific 20's I had not ran the barrel in on my tact 20 and was in love and now looking at a 20 PPC to stretch a bit further. I think I will sell my 220 swifts and 223.

Ol 55

I sold my 220 Swift to build a 20 PPC and do not regret doing it

Also I had a 22-250 that sat unfired after i got the 20 cal.Now that has been rebarrelled to 6x47L,BUT the 222 is still with meand always will be

17hmr wrote:hey guys, i bought leapold rings to suit the rifle and 30mm tube the next day. Missed, i now have a 6 inch bipod on the rifle. you are right, makes all the difference when shooting off the bonnet

I found out about the Br Bipods when James came up with one and trevort was rather impressed when he saw Jasonf and myself using them.I now have 2 as I grabbed one from 220

for $100 new.Also mate that rifle was traded with a set of loopy rings

17hmr · Post by **17hmr** » Tue Jul 05, 2011 7:54 pm

andrew, the rifle came with the loopy rings (25mm), but i threw a 30mm vortex it, hence new rings.

Post by **MISSED** » Tue Jul 05, 2011 7:58 pm

uuuummmmmmmmmmmmmmm yeah it wore a Weaver Grandslam for the very few shots it fired

AusVarmint

bought into the hype

bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype

Re: bought into the hype