Ok Guys,
I just bought a fish smoker from Rays Outdoors at a good price if you guys are interested was $80 now $40:
http://www.raysoutdoors.com.au/online-s ... 6838#Combo
But what I want to know is what are some of your tips for making good tucker. I have Sheoak and Mesquite shavings.
Years ago when my mate tried smoking some stuff they turned out to have a real horrible bitter taste and I want to avoid that so any ideas would be great.
Also how many shavings do you use in each time you use the smoker?
Fish Smoker
- DSD
- .270 Winchester
- Posts: 1446
- Joined: Wed Jul 17, 2013 9:06 pm
- Favourite Cartridge: N/A
- Location: In hiding
Re: Fish Smoker
Only ever tried smoking fish once. Found it to hard, couldn't keep the bastards alight.
Re: Fish Smoker
A big handful to Just cover the bottom, Don't over cook
But the real trick is marinating the meat/fish etc., but we got a big fridge type smoker that does whole legs, full snapper and dozens of sausages at a time which makes prepping worth it
But just straight thin strips of meat or small whole fish or fillets when their over a kilo with different wood is still Mmm Mmm Mmmmm in that kind of smoker
Did ya mate use pine? not the best idea

All the best
John

But the real trick is marinating the meat/fish etc., but we got a big fridge type smoker that does whole legs, full snapper and dozens of sausages at a time which makes prepping worth it

But just straight thin strips of meat or small whole fish or fillets when their over a kilo with different wood is still Mmm Mmm Mmmmm in that kind of smoker



Did ya mate use pine? not the best idea



All the best
John
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Fish Smoker
G'day John, I am thinking that you have just put up your hand for a "How to" post about how you built your smoker, and a couple of before, during and after shots of some joints of meat you have smoked. Im particularly interested in doing some home smoked ham. Smoked jerky might also tempt my apatite as well. What do you reckon please mate.1kshot wrote:A big handful to Just cover the bottom, Don't over cook![]()
But the real trick is marinating the meat/fish etc., but we got a big fridge type smoker that does whole legs, full snapper and dozens of sausages at a time which makes prepping worth it![]()
But just straight thin strips of meat or small whole fish or fillets when their over a kilo with different wood is still Mmm Mmm Mmmmm in that kind of smoker![]()
![]()
![]()
Did ya mate use pine? not the best idea![]()
![]()
All the best
John


- stinkitup
- .338 Lapua Magnum
- Posts: 3217
- Joined: Fri Aug 03, 2007 10:46 am
- Favourite Cartridge: 6.5x55
- Location: Lower Hunter Valley
Re: Fish Smoker
The old man built a smoker years ago, 44 gal drum on legs, door in the bottom and a few racks above and a spot for the wood shavings.
Fish, lamb, chickens, turkey bloody awesome! Pretty much used whatever shavings he had in the shed can find out though.
Fish, lamb, chickens, turkey bloody awesome! Pretty much used whatever shavings he had in the shed can find out though.
- curan
- .338 Lapua Magnum
- Posts: 2405
- Joined: Sat Aug 18, 2007 1:53 am
- Favourite Cartridge: 30/30
- Location: Mid North, South Australia
Re: Fish Smoker
Old mate of mine built a hot smoker years ago. Very easy design, and it worked great.
It was a 4 drawer pie warmer originally. A stainless steel cabinet, with mesh in the bottom of the drawers. He removed the electrical element (burnt out anyway) and cut a hole in the bottom and put it on legs, then fitted 2 runners so he could slide a roasting pan underneath with sawdust in it, He fitted a drawer handle to the pan. Below that was a small frame with a wind shroud that he fitted a bbq burner into (the old cheap round style). He also drilled a hole about 10mm diameter in the top at each of the back corners, to make sure the smoke filled the back corners. The little bit of leakage around the drawers made sure the front was full of smoke.
The beauty of this set up is you could fully open a drawer with it going, and by pulling it all the way, the back of the drawer would stop excess smoke escaping while you checked the fillets. And if you needed to restock the sawdust, you slid out the roasting pan and threw more in. It was easy to get going, just set the burner on high about a minute, then trim right back to minimum once the smoke was kicking in.
Definitely the best home made small scale hot smoker I have ever seen. Held about 2 dozen decent size Tommy (Australian Herring) once they were butterflied.
cheers, curan
It was a 4 drawer pie warmer originally. A stainless steel cabinet, with mesh in the bottom of the drawers. He removed the electrical element (burnt out anyway) and cut a hole in the bottom and put it on legs, then fitted 2 runners so he could slide a roasting pan underneath with sawdust in it, He fitted a drawer handle to the pan. Below that was a small frame with a wind shroud that he fitted a bbq burner into (the old cheap round style). He also drilled a hole about 10mm diameter in the top at each of the back corners, to make sure the smoke filled the back corners. The little bit of leakage around the drawers made sure the front was full of smoke.
The beauty of this set up is you could fully open a drawer with it going, and by pulling it all the way, the back of the drawer would stop excess smoke escaping while you checked the fillets. And if you needed to restock the sawdust, you slid out the roasting pan and threw more in. It was easy to get going, just set the burner on high about a minute, then trim right back to minimum once the smoke was kicking in.
Definitely the best home made small scale hot smoker I have ever seen. Held about 2 dozen decent size Tommy (Australian Herring) once they were butterflied.
cheers, curan
Re: Fish Smoker
No worries mate, next round Ill see what I can do
All the best
John

All the best
John
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: Fish Smoker
Bewdy John, thanks mate. 

-
- .308 Winchester
- Posts: 1714
- Joined: Mon Aug 02, 2010 7:57 pm
- Favourite Cartridge: 20 PPC
- Location: Hunter Valley NSW
Re: Fish Smoker
I have a Hark 2 door 4 tray gas fired smoker I bought on Ebay for 300 Bucks delivered
I am the type of bloke that will make something rather than buy it but time was precious
so I bought it. Would I buy another one? fuck yes,
I like to brine fish with a light coating of coarse salt then fully cover with brown sugar,
let it sit in the fridge for a hour or so salt will draw moisture out then smoke I like hickory
but there are plenty of woods about Apple, Iron Bark, etc.
Marinated chicken thighs are a big hit along with plain ordinary fat butchers sausages.
My tip would be not to cook the arse out of things
have fun and don't be afraid to experiment.
Ol 55
I am the type of bloke that will make something rather than buy it but time was precious
so I bought it. Would I buy another one? fuck yes,
I like to brine fish with a light coating of coarse salt then fully cover with brown sugar,
let it sit in the fridge for a hour or so salt will draw moisture out then smoke I like hickory
but there are plenty of woods about Apple, Iron Bark, etc.
Marinated chicken thighs are a big hit along with plain ordinary fat butchers sausages.
My tip would be not to cook the arse out of things
have fun and don't be afraid to experiment.
Ol 55