AusVarmint

Posted: **Mon Jul 15, 2019 9:45 pm**

Made this up over the last few days out of a few bits and pieces of timber that I have in the shed. Red gum lid, pine base, oak sides and ends, silky oil and red cedar for other bits like spare shaft holder, darts holder and spare flight pocket

Posted: **Mon Jul 15, 2019 10:28 pm**

Very slick. Gotta be proud of your work.

Posted: **Mon Jul 15, 2019 10:52 pm**

Thanks, yeah pretty chuffed, though there are a few errors, couple of gaps and such, 2mm narrower at one end, but it turned out ok. Was a good practice run, will probably do another but take a bit more care.

Posted: **Mon Jul 15, 2019 11:11 pm**

Camel wrote: ↑Mon Jul 15, 2019 10:52 pm Thanks, yeah pretty chuffed, though there are a few errors, couple of gaps and such, 2mm narrower at one end,

So RAF Productions is back?

But seriously, well done

Posted: **Tue Jul 16, 2019 6:19 am**

Yes.

Well done.

Posted: **Tue Jul 16, 2019 11:57 am**

trevort wrote:
Camel wrote: ↑Mon Jul 15, 2019 10:52 pm Thanks, yeah pretty chuffed, though there are a few errors, couple of gaps and such, 2mm narrower at one end,
So RAF Productions is back?

But seriously, well done

Nah RAF Productions is kept in the background for special projects for special people, like that T Thompson fella, as long as it’s shines he is happy

Finished doing the handle on the new cleaver, 8 1/2 inch blade with red gum handle, still some polishing to do and handle to be oiled

Posted: **Tue Jul 16, 2019 12:21 pm**

Knife handles done over the last week or so in between waiting for glue to dry, all old resurrected knives I have picked up over the years. Some Greenrivers, an F Dick or two, and some hand forged, some I don’t know, but they all have good high carbon steel in them, and I will use them when doing sheep killing and butchering, three on the end are still to do

Posted: **Tue Jul 16, 2019 4:47 pm**

nice job thld

Posted: **Tue Jul 16, 2019 5:46 pm**

Not bad Mark, not bloody bad at all.

Posted: **Tue Jul 16, 2019 6:03 pm**

Camel wrote: ↑Tue Jul 16, 2019 12:21 pm Knife handles done over the last week or so in between waiting for glue to dry, all old resurrected knives I have picked up over the years. Some Greenrivers, an F Dick or two, and some hand forged, some I don’t know, but they all have good high carbon steel in them, and I will use them when doing sheep killing and butchering, three on the end are still to do

Yes, but will they keeel?

Posted: **Tue Jul 16, 2019 7:03 pm**

Yep, they have all drawn blood at various times, some of it even mine

RBF Productions.

Posted: **Wed Jul 17, 2019 6:48 am**

Well done Thod nice work

Sent from my HTC 2PZC100 using Tapatalk

AusVarmint

Darts carry box

Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box

Re: Darts carry box