Page 1 of 1
Surgeon 1086 long action
Posted: Wed Sep 19, 2018 10:07 pm
by Teepee
Hi all, Just wondering if a barrel from a rem 700 L/Action would swap into a Surgeon action without any mods. Anyone have any info would be appreciated. Cheers
Teepee
Re: Surgeon 1086 long action
Posted: Thu Sep 20, 2018 6:32 am
by Tony Z
Threads are the same as is tenon length. Headspace check as usual but i cannot see why not. Short action barrels would fit as well.
Re: Surgeon 1086 long action
Posted: Thu Sep 20, 2018 12:33 pm
by Teepee
Many thanks tonyz,
I was hoping it was going to work as I have already bought the action. The brl is coming off a short action to go onto the surgeon l/a.
Hopefully there won't be any major issues with swapping it over. Wait and see!!!
Re: Surgeon 1086 long action
Posted: Thu Sep 20, 2018 5:05 pm
by Glenn
Even it dose fit why would you want to screw a Rem barrel in custom Surgeon action?
I only ask because you can go to all the trouble putting it together and it doesn't shoot.
Rem barrels regularly have none concentric chambers and bad bores.
The barrel is what makes a gun shoot well.
After what Tonyz has said about the Bergara barrels I would look at one
of those.
viewtopic.php?f=10&t=24490
Glenn
Re: Surgeon 1086 long action
Posted: Fri Sep 21, 2018 12:43 am
by Teepee
I never mentioned what brand the brl was!!!
Let's just say I wouldn't go to the trouble of using a rem brl on the surgeon, and leave it at that.
That would be just plain sacrilege, wouldn't it!
Or stupidity.
Cheers
Teepee
Re: Surgeon 1086 long action
Posted: Fri Sep 21, 2018 9:44 am
by Seddo
Glenn wrote: ↑Thu Sep 20, 2018 5:05 pm
Even it dose fit why would you want to screw a Rem barrel in custom Surgeon action?
I only ask because you can go to all the trouble putting it together and it doesn't shoot.
Rem barrels regularly have none concentric chambers and bad bores.
The barrel is what makes a gun shoot well.
Glenn
BINGO!!!!
Re: Surgeon 1086 long action
Posted: Fri Sep 21, 2018 11:43 am
by Glenn
Teepee wrote: ↑Fri Sep 21, 2018 12:43 am
I never mentioned what brand the brl was!!!
Let's just say I wouldn't go to the trouble of using a rem brl on the surgeon, and leave it at that.
That would be just plain sacrilege, wouldn't it!
Or stupidity.
Cheers
Teepee
barrel from a rem 700 L/Action
That what i based me comment on Teepee, didn't mean to offend!
That would be just plain sacrilege, wouldn't it!
I agrre!
Glenn
Re: Surgeon 1086 long action
Posted: Fri Sep 21, 2018 5:10 pm
by Tony Z
Agree on the Bergara barrel suggestion. The one i have has been pulled from the Deviant and put aside for my HG for future development. It is without doubt one of the most impressive barrels i have had to date.
As for screwing a 700 barrel into a Surgeon action, it really is none of our affair. Teepee's action, his choice. Everyone builds to a budget. Action now, cheap barrel now until funds allow or the right barrel appears. Slim pickings as far as barrels go out there and what is out there ain't cheap. Bergaras as expected, are not as cheap as when i bought mine. Who whould have guessed that?
Re: Surgeon 1086 long action
Posted: Fri Sep 21, 2018 8:56 pm
by Teepee
Hi all,
No it's not a rem brl, and no offence taken.
It's a Lilja I'm taking off a short action 700 in 7mm/300 wsm. I want the longer action to try and get the longer projectiles to feed through a mag.
Cheers
Teepee