Almost there

Gunsmithing & DIY forum for everyone. Enjoy!
Post your projects, questions and advice here.
Post Reply
User avatar
Greysa
New Member
Posts: 43
Joined: Thu Oct 03, 2013 8:10 am
Favourite Cartridge: .243 Win
Location: Bathurst NSW

Almost there

Post by Greysa »

Hey Guys, just thought I would show you all the benches a mate and I built for reloading etc. Please excuse the mess, the entire shed is a bit out of control at the moment. A little more work and they will be complete.
Attachments
IMG_0856.JPG
IMG_0851.JPG
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Almost there

Post by Camel »

Looks better with the loading gear on it than the other shit. Later on you will discover the many uses of more shelves, more cupboards and eventually a whole room for all your gear. Pretty good effort. :D
User avatar
Greysa
New Member
Posts: 43
Joined: Thu Oct 03, 2013 8:10 am
Favourite Cartridge: .243 Win
Location: Bathurst NSW

Re: Almost there

Post by Greysa »

Cheers Camel, there are actually 2 benches, I just cleaned the reloading one up better then the other. I plan on getting the racking to hang those blue bins off as well, but I want to put some lights on the underside of the shelves first, as the shed lights don't quite illuminate the area enough.
User avatar
Glenn
375 Cheytac
Posts: 1433
Joined: Tue Apr 10, 2007 5:14 pm
Favourite Cartridge: 300WM
Location: Victoria

Re: Almost there

Post by Glenn »

Well done Greys!

That's not a mess!
I put sides and a top on mine and put a light in it.

Glenn
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: Almost there

Post by trevort »

Nice
B4408
.270 Winchester
Posts: 1270
Joined: Sat Aug 31, 2013 6:49 am
Favourite Cartridge: 20VT
Location: Mid North Coast, NSW

Re: Almost there

Post by B4408 »

Greysa, looks good and solid, can't have to many benches.

Instead of the blue bins have a think about more shelves and small plastic boxes with lids to keep the dust, insects and crap out. Saves a lot of time not having to clean things before you use them.

Bruce
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Almost there

Post by Camel »

B4408 wrote:Greysa, looks good and solid, can't have to many benches.

Instead of the blue bins have a think about more shelves and small plastic boxes with lids to keep the dust, insects and crap out. Saves a lot of time not having to clean things before you use them.

Bruce

Yep, if you know a builder, the plastic boxes they get tec screws, nails and such are fantastic for doing just that.
Post Reply