Page 1 of 5
Timberrrrrrrrrrrrrr
Posted: Sat Feb 21, 2015 1:43 pm
by Brad Y
Some timber
Some drawing on some timber
Some roughing out of the timber before putting on the mill
More to come...
Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 6:09 pm
by kickinback
That certainly qualifies as "starting with a clean slate"
Get into it and post lots of pics please.
Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 7:15 pm
by MISSED
Bloody near two days and no additions come we are waiting.
Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 8:13 pm
by The Raven
MISSED wrote:Bloody near two days and no additions come we are waiting.
That's it! He's finished!
Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 8:17 pm
by TexNAss
Finished- it ain't finished until it has a nail driven into it.
Well actually it was being made with a grinder and all- it does look a bit like that fence post stock that's buried away in the old archives.
Tex.
Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 8:19 pm
by The Raven
TexNAss wrote:Finished- it ain't finished until it has a nail driven into it.
Well actually it was being made with a grinder and all- it does look a bit like that fence post stock that's buried away in the old archives.
Tex.
Looking at his grinder, he's waiting for new discs at Bunnings.
Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 11:17 pm
by Brad Y
I am actually. They only had 1 of the 40 grit discs left the wankers. No the mrs spat out bub number 2 today. Staying at home making stocks wasnt worth the risk. Will get onto it more this week hopefully.
Re: Re: Timberrrrrrrrrrrrrr
Posted: Sun Feb 22, 2015 11:30 pm
by TexNAss
Brad Y wrote:I am actually. They only had 1 of the 40 grit discs left the wankers. No the mrs spat out bub number 2 today. Staying at home making stocks wasnt worth the risk. Will get onto it more this week hopefully.
Well that's an acceptable excuse!
Congrats mate.
Tex.
Re: Timberrrrrrrrrrrrrr
Posted: Mon Feb 23, 2015 12:21 am
by curan
Brad Y wrote:I am actually. They only had 1 of the 40 grit discs left the wankers. No the mrs spat out bub number 2 today. Staying at home making stocks wasnt worth the risk. Will get onto it more this week hopefully.
Congratulations!
Hope mum and bub are doing well.......
Re: Timberrrrrrrrrrrrrr
Posted: Mon Feb 23, 2015 8:19 am
by Camel
Yeah, congratulations of the bub mate. Hope all is going well with the mrs and young'un.
Re: Timberrrrrrrrrrrrrr
Posted: Mon Feb 23, 2015 9:03 am
by bigfellascott
Is that laminated?
Congrats on the new addition mate, hope it all goes well for you all.
Re: Timberrrrrrrrrrrrrr
Posted: Mon Feb 23, 2015 9:04 am
by MISSED
Passable excuse Congrats on the arrival.
Re: Timberrrrrrrrrrrrrr
Posted: Mon Feb 23, 2015 11:17 am
by Brad Y
Thank fellas. Yes its laminate- I wont risk solid timber on a competition gun for fear of it warping and mucking about with bedding/tune.
Re: Timberrrrrrrrrrrrrr
Posted: Mon Apr 27, 2015 7:16 pm
by Brad Y
Righto two months later....
Went to Wardys place the other day and spent some time milling surfaces flat and level. Today i got back onto it with the grinder to rough out shapes from the butt and moving forward. Need to get back to his and mill a bit more on it. The hardest bit is trying to get the grip section sorted out in straight lines. A CNC lathe with a cord plugged into my head would be alot quicker. When the action arrives from USA I can do the action area a bit quicker.
Re: Timberrrrrrrrrrrrrr
Posted: Mon Apr 27, 2015 7:18 pm
by Brad Y
And yes thats my Peppa Pig placemat.... caught