Camel wrote:I dont have any accurte way of weighing it, but 25 to 30kg with everything on it might be close, I used thick wall square tube and round pipe, 3mm wall stuff.
As if you and anything would outweigh bathroom scales. That would probably be close enough measurement.
Just work it out by length of each peice with an app on your new phone crayon boy
Camel wrote:I dont have any accurte way of weighing it, but 25 to 30kg with everything on it might be close, I used thick wall square tube and round pipe, 3mm wall stuff.
As if you and anything would outweigh bathroom scales. That would probably be close enough measurement.
Just work it out by length of each peice with an app on your new phone crayon boy
Sent from my SM-G930F using Tapatalk
As if I need to worry about weighing myself on bathroom scales, there is a set somewhere but I havent seen them in years, and I am not going to chew on that crayon thanks.
Rabbitz wrote: ↑Sun Jun 17, 2018 12:06 pmBy the way, good job Camel.
If you noticed the three lines cut into the leg and foot in photo 1, that is so the numpty can put it together the right way, each leg has either 1, 2 or 3 lines cut into the four parts of each leg/foot and top section, if they are lined up, it all slots together nicely. TREV PAY HEED.
Thinking of calling it the Kamel Kritter Kranker, wonder how that would go down with the pansies.
If you get to Narromine, getting a gun to shoot won't be a problem, TZ will have a nice HG unemployed for the 1000, I should know, it's the gun I won my first SC with. Dare say there will be others to lend you the hardware as well.
Camel you need to make the commitment and borrow the equipment. Sorry I only have one gun but if you turn up I’ll shout your ammo for the 1000 yd as a thanks for this
We had a couple of these at different angles. This one with longer legs was for removing engines.
With your same legs would meet all of your criteria and as long as you kick the legs out is solid
