I made a k nife from a blank I grabbed from here http://www.knifeblanksaustralia.com/app ... 818?page=1
and a set of scales from http://www.ebay.com.au/itm/301908516720 ... EBIDX%3AIT.
I glued the scales on with some expoxy I had left over from bedding an action
I was going to use my BIL`s linisher belt thingy but he was not at home.
This left me with the option of a handsaw ,a 9"grinder with a cutting wheel and a 5" grinder with a flapper disc.
Used a bit of wet and dry Thod gave me a couple of years back and a bit of Vegie oil.
Came up like this
I made a k nife
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: I made a k nife
Looks the goods
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Camel
- Ultimate AusVarminter
- Posts: 12084
- Joined: Sat May 28, 2011 8:51 pm
- Favourite Cartridge: 20-222 6x47 rem, 250
- Location: Northern Riverina NSW
Re: I made a k nife
No blood ?? Trev will be feeling like he is on his lonesome.
Looks good, thought I some how wonder how good a 9 inch grinder would go without burning the wood.
Looks good, thought I some how wonder how good a 9 inch grinder would go without burning the wood.
- Seddo
- .338 Lapua Magnum
- Posts: 2054
- Joined: Sat Jan 03, 2009 9:17 am
- Favourite Cartridge: Creedmoor
- Location: Vic
Re: I made a k nife
Nice
- LoneRider
- 50 BMG
- Posts: 3899
- Joined: Thu May 22, 2008 10:20 pm
- Favourite Cartridge: 308
- Location: rubyvale,Central Qld
Re: I made a k nife
looks good mate..
camel : i shaped a leather knife hand with a linishing wheel on a 4" [?] grinder.
and cleaned the shafts and hand grips of a couple walking sticks with it....
camel : i shaped a leather knife hand with a linishing wheel on a 4" [?] grinder.
and cleaned the shafts and hand grips of a couple walking sticks with it....