Stocks

Seddo · Post by **Seddo** » Wed Apr 29, 2015 3:19 pm

With all the posts of guys making stocks of late i decided to do it my way, i sent Ken an email and a few weeks later i had this:

I'm happy to give it a light sand a few coats but you can stick the major timber work.

The Raven · Post by **The Raven** » Wed Apr 29, 2015 3:26 pm

Very nice. I wouldn't even know where to start making one, and would probably drive myself crazy trying.

Should I know who Ken is? Does he have a website or equivalent? Enquiring minds would like to know.

EDIT: OK, figured it out myself. Well, Google helped.

Still can't find a website.

Seddo · Post by **Seddo** » Wed Apr 29, 2015 3:51 pm

Ken Noye, he doesnt have a website but has an email address: kenn.noye@gmail.com. i'm not sure if i can post his number as its his home one.

He has quite a few patterns and lots of inlets, he is more into target style stocks can can do them all. He made them for ProCal so all of the rifles that peter put on used guns with laminated stocks when he was clearing out were made by Ken. I have 3 of them to date and like they way they are finished.

The Raven · Post by **The Raven** » Wed Apr 29, 2015 3:57 pm

Seddo wrote:Ken Noye, he doesnt have a website but has an email address: kenn.noye@gmail.com.. i'm not sure if i can post his number as its his home one.

He has quite a few patterns and lots of inlets, he is more into target style stocks can can do them all. He made them for ProCal so all of the rifles that peter put on used guns with laminated stocks when he was clearing out were made by Ken. I have 3 of them to date and like they way they are finished.

Thanks mate. As much as I'd like some fancy stocks it's more of window shopping at this point.

Seddo · Post by **Seddo** » Wed Apr 29, 2015 4:22 pm

This is the last one i got from him

All i have to do now is throw it in the mill and clean up the bedding. The problem is i need to put a block under the vice to get the stock level in it but i hate the idea of having to square it up the vice so i've been putting it off. Now I have a second stock to do soon so it wont be too far off.

The Raven · Post by **The Raven** » Wed Apr 29, 2015 6:05 pm

That's purdy!

Seddo · Post by **Seddo** » Wed Apr 29, 2015 7:00 pm

here it it with a 22" barrel, i don't think it would look good if the barrel was much longer and the flip side is with a 16-18" barrel it would be very sexy.

trevort · Post by **trevort** » Wed Apr 29, 2015 7:14 pm

does he have laminated walnut?

Seddo · Post by **Seddo** » Wed Apr 29, 2015 7:17 pm

I've never asked.

Teepee · Post by **Teepee** » Wed Apr 29, 2015 9:09 pm

Nice stock

Can I ask approx cost or is that left up to a direct contact with Ken.

Seddo · Post by **Seddo** » Wed Apr 29, 2015 9:26 pm

I'm not sure if I got a discount being a dealer so it's safer to ask him.

Camel · Post by **Camel** » Wed Apr 29, 2015 10:41 pm

Seddo wrote:I'm not sure if I got a discount being a dealer so it's safer to ask him.

Diplomatic.

AusVarmint

Stocks

Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks

Re: Stocks