Gunsmithing & DIY forum for everyone. Enjoy!
Post your projects, questions and advice here.
trevort
Spud Gun
Posts: 12710 Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne
Post
by trevort » Fri Feb 13, 2015 8:09 pm
.. Do these things go?
Fell out of the mounts when I took the scope off the stiller. Luke reckons they are to stop recoil moving the rings in the mounts. So I just pulled the scope off its new home on the JAB20 and beef hooked if I can see anywhere to put these little jiggers
kickinback
50 BMG
Posts: 3991 Joined: Sun Jan 07, 2007 11:54 am
Favourite Cartridge: 260 Rem
Location: Lilydale Vic
Post
by kickinback » Fri Feb 13, 2015 9:08 pm
They get clamped into the slot between the two halves. Big end into the slot.
MISSED
Moderator
Posts: 8377 Joined: Sat Dec 22, 2007 12:23 pm
Favourite Cartridge: 20 PPC
Location: YASS
Post
by MISSED » Fri Feb 13, 2015 10:01 pm
kickinback wrote: Big end into the slot.
Usually
trevort
Spud Gun
Posts: 12710 Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne
Post
by trevort » Sat Feb 14, 2015 1:34 am
Yep there's a slot on the bases the came off but none on the rifle it went onto
kickinback
50 BMG
Posts: 3991 Joined: Sun Jan 07, 2007 11:54 am
Favourite Cartridge: 260 Rem
Location: Lilydale Vic
Post
by kickinback » Sat Feb 14, 2015 7:52 am
What bases are you running? They are meant to slot into the slots in the bases.
Camel
Ultimate AusVarminter
Posts: 12084 Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW
Post
by Camel » Sat Feb 14, 2015 10:59 am
You reckon you need them ? That 20Jab of yours must be pretty special if it can move the scope under recoil.
Chuck em mate, trust me, you will never need them again.
trevort
Spud Gun
Posts: 12710 Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne
Post
by trevort » Tue Feb 17, 2015 4:36 pm
Kickin the 527 just has a bit to hook them into on the receiver