T3 Muzzel Brake

[big G]

Probably for Kickinback. Have A Tikka T3 in 270 Win. My question is , will the Tikka screw on 308 brake with its bigger internal diameter work on the T3 lite 270 .Cheers Big G.

[kickinback]

It will work BUT, in theory you want all gasses to be shed through the ports. If the last hole is oversize then you may not achieve this. Have a good look at the HSS unit. The center hole is very oversize.but the last hole has a bushing pressed in with a very clever design on the back of it to shed the last of the gasses out the ports.

[big G]

Thanks big time kickinback. Back to plan B. Cheers

[bimbo]

Thanks big time kickinback. Back to plan B. Cheers

Plan B = Man up and shoot un braked?

[big G]

Man up shoot un braked. I'm big ,can lift heavy things, can give an answer to questions with out much though.That doesn't exclude me from being fragile. Ok I'll man up. .My daughter loves your walking targets.Cheers George

[big G]

It will work BUT, in theory you want all gasses to be shed through the ports. If the last hole is oversize then you may not achieve this. Have a good look at the HSS unit. The center hole is very oversize.but the last hole has a bushing pressed in with a very clever design on the back of it to shed the last of the gasses out the ports.

HSS 30 cal .338 ID.30 thou clearance ,do I go with same clearance with .277 + 30 thou.??Hopping on missed $25 breaks if i'm included.Cheers Big G.

[kickinback]

Yes, exactly.