Martini Cadet .310 rebarrel

Gunsmithing & DIY forum for everyone. Enjoy!
Post your projects, questions and advice here.
User avatar
stinkitup
.338 Lapua Magnum
Posts: 3217
Joined: Fri Aug 03, 2007 10:46 am
Favourite Cartridge: 6.5x55
Location: Lower Hunter Valley

Re: Martini Cadet .310 rebarrel

Post by stinkitup »

Very nice 303, can see why the mashburn is such a winner, looks like a great little round, how many grains do you push your proj with?

Ryan
User avatar
303
New Member
Posts: 27
Joined: Wed Oct 10, 2012 2:34 pm
Favourite Cartridge: .303 British
Location: SE QLD
Contact:

Re: Martini Cadet .310 rebarrel

Post by 303 »

I use 13gn of 2205 which is mild but accurate
User avatar
Rabbitz
.338 Lapua Magnum
Posts: 2421
Joined: Sun Mar 25, 2007 9:05 am
Favourite Cartridge: 222
Location: Barossa Valley, SA
Contact:

Re: Martini Cadet .310 rebarrel

Post by Rabbitz »

Can I ask what is meant by "Historically Correct"?

Now my memory is shaky about these rifles - I have hankered after one - but I thought they were historically produced as:

.310 Cadet (aka .310 Greener)
.22 Long Rifle
and an odd cartridge called something like 297/230.

I am happy to be corrected.

Rabz
User avatar
gtguru
New Member
Posts: 9
Joined: Mon Dec 10, 2012 12:15 pm
Favourite Cartridge: 300RUM
Location: Nelson Bay

Re: Martini Cadet .310 rebarrel

Post by gtguru »

You might find a LOT of the 310's are actually 32-20 as well. In the mid fifties Mick Smith (Smiths Gunstore Sydney) decided to purchase 20000 cadets and rechambered them in 32-20 (as civilians werent allowed to have military calibres) and flog em off to the public for 20pound. They sold that well that he had over a dozen mates help out at his store to make a human chain to deal with the queue of people... After this success he purchased another 50000 and another 10000 rifles and did the same... They only had enough time to stamp the barrels with "32-20" on the first batch that was sold so there are thousands out there that say they are 310's but are actually 32-20's.... I found that out the hard way! :?
User avatar
gtguru
New Member
Posts: 9
Joined: Mon Dec 10, 2012 12:15 pm
Favourite Cartridge: 300RUM
Location: Nelson Bay

Re: Martini Cadet .310 rebarrel

Post by gtguru »

Id be interested in knowing what a rebarrel would be worth for this action though.. I've seen some very sexy rifles made from it!
User avatar
lowndsie
Moderator
Posts: 871
Joined: Thu Jul 06, 2006 8:10 pm
Favourite Cartridge: N/A
Location: Glenbrook NSW

Re: Martini Cadet .310 rebarrel

Post by lowndsie »

Mine was done by the late Don Black and he chambered it in an improved version of the 218 Bee. Not quite a mashburn but it's pretty close. He also made up some dies to match.

It'd be worth getting prices before going ahead with the work though. I know the firing pin hole needs to be bushed plus any other problems that might arise could end up costing you more than you had hoped. Mine seems to have a nasty habit of bouncing fired cases off the scope and back into the loading port. Usually base first just to make it that little bit harder to get out in a hurry.

If I ever have to get mine re-barreled I'd be looking at the 17 Ackley Hornet!
Chrispy
.17 HMR
Posts: 192
Joined: Sun Jul 16, 2006 2:22 pm
Favourite Cartridge: 221 Furball
Location: Beenleigh QLD

Re: Martini Cadet .310 rebarrel

Post by Chrispy »

What about a "310 cadet Magnum". That is a re chambering to 32-20, but using a 316 jacketed or appropriate 317 to 321 cast lead projectile.

Or a version of the 30 streaker /308-357 mag.

Could bang that out reasonably fast......

Chrispy
Bad Ass Wallace
New Member
Posts: 7
Joined: Fri Mar 15, 2013 7:45 pm
Favourite Cartridge: 220 Swift

Re: Martini Cadet .310 rebarrel

Post by Bad Ass Wallace »

Some of my sporting Martini's include (from T to B excluding the 303) 222Rimmed, 17/222Rimmed, 17 Ackley Hornet, 218 Mashburn Bee and a 25/35 Winchester

Image
User avatar
Camel
Ultimate AusVarminter
Posts: 12084
Joined: Sat May 28, 2011 8:51 pm
Favourite Cartridge: 20-222 6x47 rem, 250
Location: Northern Riverina NSW

Re: Martini Cadet .310 rebarrel

Post by Camel »

You're a teasing old bugger BAW, there are some nice ones among that lot. 8)
Post Reply