Page 1 of 1
.308 loads using 2206H
Posted: Wed Jul 02, 2008 9:16 pm
by Buffy
Ok fellas i went to my lgs today and spent 300 bucks on powders and primers, and now i have to develop a load for my old trusty 308 using 2206H... it will be pushing 150gr'ers and 168gr projies....
P.S if anyone has any loads for the 300 rem ultra mag using 2225 please let me know.
any help appreciated
Cheers BB
Re: .308 loads using 2206H
Posted: Thu Jul 03, 2008 4:22 pm
by tophet1
41 grains of 2206H behind the 165 Woodleigh PP gets good accuracy in my 1 in 12" twist .308. The usual relaoding caution(s) should be applied.
Re: .308 loads using 2206H
Posted: Fri Jul 04, 2008 9:08 pm
by dave
Anyone know what twist the omark 308s have? Im in the same boat reloading her with 2206h so would be good to get a few opinions, cheers
Dave
Re: .308 loads using 2206H
Posted: Fri Jul 04, 2008 9:17 pm
by Buffy
dave wrote:Anyone know what twist the omark 308s have? Im in the same boat reloading her with 2206h so would be good to get a few opinions, cheers
Dave
Dave i believe they are 1:12.....
HTH Cheers BB
Re: .308 loads using 2206H
Posted: Sun Jul 06, 2008 9:44 am
by RDavies
44.5gns of 2206H behind a 155gn pill is pretty much ballpark load for fullbore and F class shooters.
Re: .308 loads using 2206H
Posted: Fri Jul 11, 2008 2:32 pm
by kurcha
42 for 168 amax of 2206h
