.308 loads using 2206H

Buffy · Post by **Buffy** » Wed Jul 02, 2008 9:16 pm

Ok fellas i went to my lgs today and spent 300 bucks on powders and primers, and now i have to develop a load for my old trusty 308 using 2206H... it will be pushing 150gr'ers and 168gr projies....

P.S if anyone has any loads for the 300 rem ultra mag using 2225 please let me know.

any help appreciated

Cheers BB

tophet1 · Post by **tophet1** » Thu Jul 03, 2008 4:22 pm

41 grains of 2206H behind the 165 Woodleigh PP gets good accuracy in my 1 in 12" twist .308. The usual relaoding caution(s) should be applied.

dave · Post by **dave** » Fri Jul 04, 2008 9:08 pm

Anyone know what twist the omark 308s have? Im in the same boat reloading her with 2206h so would be good to get a few opinions, cheers

Dave

Buffy · Post by **Buffy** » Fri Jul 04, 2008 9:17 pm

dave wrote:Anyone know what twist the omark 308s have? Im in the same boat reloading her with 2206h so would be good to get a few opinions, cheers

Dave

Dave i believe they are 1:12.....

HTH Cheers BB

RDavies · Post by **RDavies** » Sun Jul 06, 2008 9:44 am

44.5gns of 2206H behind a 155gn pill is pretty much ballpark load for fullbore and F class shooters.

kurcha · Post by **kurcha** » Fri Jul 11, 2008 2:32 pm

42 for 168 amax of 2206h

AusVarmint

.308 loads using 2206H

.308 loads using 2206H

Re: .308 loads using 2206H

Re: .308 loads using 2206H

Re: .308 loads using 2206H

Re: .308 loads using 2206H

Re: .308 loads using 2206H