Primer catcher for an RCBS Rockchucker Supreme
- Cammo
- .17 HMR
- Posts: 175
- Joined: Wed Jun 03, 2009 8:59 pm
- Favourite Cartridge: .17 Hornet
- Location: Wollongong, NSW
Primer catcher for an RCBS Rockchucker Supreme
EBay have 3D printed primer catchers for the Rockchucker Supreme to replace the inverted Y catcher. The catcher is enclosed and the spent primer goes down a hose into a bottle.
From USA they cost around $50 AUD plus $45 AUD postage, does anyone in Australia print them? I'd prefer to keep my $ here if possible and the postage is ridiculous.
regards
From USA they cost around $50 AUD plus $45 AUD postage, does anyone in Australia print them? I'd prefer to keep my $ here if possible and the postage is ridiculous.
regards
- trevort
- Spud Gun
- Posts: 12710
- Joined: Thu Sep 14, 2006 9:21 pm
- Favourite Cartridge: Tater
- Location: Melbourne
Re: Primer catcher for an RCBS Rockchucker Supreme
I like the sound of spent
primers rattling around in the dyson
Sent from my iPhone using Tapatalk
primers rattling around in the dyson
Sent from my iPhone using Tapatalk
- The Raven
- Ultimate AusVarminter
- Posts: 5945
- Joined: Tue Feb 08, 2011 2:35 pm
- Favourite Cartridge: .270 Win
- Location: The Cloud
Re: Primer catcher for an RCBS Rockchucker Supreme
Add some excitement, try live primers.trevort wrote:I like the sound of spent
primers rattling around in the dyson
Sent from my iPhone using Tapatalk
One of my first jobs was at a car wash with and industrial multi-hose vacuum. Amazing how many loose rounds we collected.
A bit scary when you see half a dozen loose rim fire vanish up the nozzle to rattle through 10-15 metres of steel pipe before dropping into the steel drum.
Upside was that loose coins funded our Christmas party.
Sent from my iPhone using Tapatalk
- bimbo
- 300 Win Mag
- Posts: 1791
- Joined: Tue Oct 10, 2006 10:34 pm
- Favourite Cartridge: 17HH
- Location: Newcastle, NSW
Re: Primer catcher for an RCBS Rockchucker Supreme
I have a file for one somewhere, I'll dig it out and print a couple for you to try if you want
- The Raven
- Ultimate AusVarminter
- Posts: 5945
- Joined: Tue Feb 08, 2011 2:35 pm
- Favourite Cartridge: .270 Win
- Location: The Cloud
Re: Primer catcher for an RCBS Rockchucker Supreme
If it's not too much of an ask, would you be able to make the following? If so, let me know a price as I suspect the die storage tray may use a fair bit of material.
https://www.thingiverse.com/thing:2850028
Three of the above.
https://www.thingiverse.com/thing:1972400
Just one of the ram arm.
- Rabbitz
- .338 Lapua Magnum
- Posts: 2421
- Joined: Sun Mar 25, 2007 9:05 am
- Favourite Cartridge: 222
- Location: Barossa Valley, SA
- Contact:
Re: Primer catcher for an RCBS Rockchucker Supreme
I always thought that the floor did an acceptable job of catching them.
I can't remember one missing the floor - although I do remember standing on one or two in bare feet...
I can't remember one missing the floor - although I do remember standing on one or two in bare feet...
- The Raven
- Ultimate AusVarminter
- Posts: 5945
- Joined: Tue Feb 08, 2011 2:35 pm
- Favourite Cartridge: .270 Win
- Location: The Cloud
Re: Primer catcher for an RCBS Rockchucker Supreme
That last bit is what hurts, followed by Mrs Raven complaining when they go up the vac....
- Cammo
- .17 HMR
- Posts: 175
- Joined: Wed Jun 03, 2009 8:59 pm
- Favourite Cartridge: .17 Hornet
- Location: Wollongong, NSW
Re: Primer catcher for an RCBS Rockchucker Supreme
bimbo
That'd be great and I'm happy to pay for the privilege.
Until then 'll have to stop wearing Crocs when reloading as the dropped primers play havoc when you walk.
That'd be great and I'm happy to pay for the privilege.
Until then 'll have to stop wearing Crocs when reloading as the dropped primers play havoc when you walk.
-
- .270 Winchester
- Posts: 1270
- Joined: Sat Aug 31, 2013 6:49 am
- Favourite Cartridge: 20VT
- Location: Mid North Coast, NSW
Re: Primer catcher for an RCBS Rockchucker Supreme
Like these better PM me your address.The Raven wrote: ↑Tue May 05, 2020 5:42 pmIf it's not too much of an ask, would you be able to make the following? If so, let me know a price as I suspect the die storage tray may use a fair bit of material.
https://www.thingiverse.com/thing:2850028
Three of the above.
https://www.thingiverse.com/thing:1972400
Just one of the ram arm.
Bruce
-
- .270 Winchester
- Posts: 1270
- Joined: Sat Aug 31, 2013 6:49 am
- Favourite Cartridge: 20VT
- Location: Mid North Coast, NSW
Re: Primer catcher for an RCBS Rockchucker Supreme
Cammo
I can print something but would need the design.
See how you go from the other guys and get in touch if you have no luck.
Bruce
I can print something but would need the design.
See how you go from the other guys and get in touch if you have no luck.
Bruce
- Cammo
- .17 HMR
- Posts: 175
- Joined: Wed Jun 03, 2009 8:59 pm
- Favourite Cartridge: .17 Hornet
- Location: Wollongong, NSW
Re: Primer catcher for an RCBS Rockchucker Supreme
Got one as I found some online is Aus, very good.