Page 1 of 4
Lets Kick This One Around
Posted: Fri Aug 18, 2017 7:24 pm
by johno1
So as i said got the 19 hornet back together and want to work with 32gr bullet and CFE BLK. Hogdon loads as follows
17 Ackley hornet 30gr bullet CFE BLK
10.0gr = 2,726 fps @ 36,900 CUP 10.7gr = 2.917fps @ 45,400 CUP
22 K Hornet
14.4gr = 31,030 fps @ 26,3000 CUP 16.0 = 3,219 fps @ 30,300 CUP
19 Hornet 32gr bullet
AA 1680 13.5gr = 3,340 fps
4227 (2205) 12.0gr = 3,275 fps
Vhit N 120 13.3gr = 3,270 fps.
So lets work out a safe starting load for CFE BLK
Johno
Re: Lets Kick This One Around
Posted: Fri Aug 18, 2017 7:57 pm
by Camel
You said the burn rate is between 1680 (fast) and N200 (slow) I would be picking a mid range load for N200 and work from there

Re: Lets Kick This One Around
Posted: Fri Aug 18, 2017 8:08 pm
by stinkitup
Seeing as similar case but larger cal the 17hornet loads would be in the light side. Should be okay to start i reckon.
Sent from my SM-N910G using Tapatalk
Re: Lets Kick This One Around
Posted: Fri Aug 18, 2017 8:14 pm
by johno1
Fastest to slowest
#68 AA 1680
#69 CFE BLK
#70 Norma 200
Bugger all difference in burn rate.
My thoughts were along those lines Ryan I reckon 11.0 to 11.5gr would be a pretty safe start load.
Johno
Re: Lets Kick This One Around
Posted: Fri Aug 18, 2017 8:45 pm
by stinkitup
Sounds like a plan Johno
Sent from my SM-N910G using Tapatalk
Re: Lets Kick This One Around
Posted: Fri Aug 18, 2017 11:24 pm
by MISSED
I am going to buy a 22 K Hornet and run 14.4 grains of CFE BLK
Re: Lets Kick This One Around
Posted: Fri Aug 18, 2017 11:26 pm
by Camel
MISSED wrote: ↑Fri Aug 18, 2017 11:24 pm
I am going to buy a 22 K Hornet and run 14.4 grains of CFE BLK
Only 26,000 cup, I would be loading it up a bit more, might even crack 36,000 fps

Re: Lets Kick This One Around
Posted: Sat Aug 19, 2017 7:54 am
by johno1
Was'nt convinced on those figures either I should have inserted quatation marks but its from the Hodgdon web site
Johno
Re: Lets Kick This One Around
Posted: Sun Aug 20, 2017 10:59 am
by johno1
Well there was a power of input on this subject
Back to cakes & cheeses
Johno
Re: Lets Kick This One Around
Posted: Mon Aug 21, 2017 12:40 pm
by curan
Re: Lets Kick This One Around
Posted: Mon Aug 21, 2017 1:07 pm
by MISSED
Re: Lets Kick This One Around
Posted: Mon Aug 21, 2017 1:47 pm
by trevort
Johno you might be the only person I know of with a 19 anything and I've never heard of the powder you mention
Sent from my iPhone using Tapatalk
Re: Lets Kick This One Around
Posted: Mon Aug 21, 2017 2:43 pm
by johno1
Well this powder is bloody fine and its going to go through a powder measure just lovely.
Can't wait to see if Rob has it in the quickload update.
Just loaded one round of 7.62x39 with Tony's load of 30.0gr i'll see what presure I get in the CZ
Johno
Johno
Re: Lets Kick This One Around
Posted: Mon Aug 21, 2017 3:33 pm
by dashooter
johno1 wrote: ↑Mon Aug 21, 2017 2:43 pm
Well this powder is bloody fine and its going to go through a powder measure just lovely.
Can't wait to see if Rob has it in the quickload update.
Just loaded one round of 7.62x39 with Tony's load of 30.0gr i'll see what presure I get in the CZ
Johno
Johno
Not here as yet Johno. Have emailed Neconos to see if i can get a tracking number.
Re: Lets Kick This One Around
Posted: Mon Aug 21, 2017 3:58 pm
by johno1
No worries mate.
Re the powder I just loaded a 123gr in front of 30gr CFE BLK, no presure worries and seemed mild to the shoulder, came and ran the powder through the RCBS measure and did 20 rounds, I checked everyone of the scales and the dropped load was perfect, this is a nice powder
Johno