Page 1 of 1

280ai

Posted: Wed Jul 12, 2017 6:07 pm
by macca
2017-07-12 17.59.49.jpg
2017-07-12 17.59.49.jpg (70.07 KiB) Viewed 1199 times
I love it when a plan comes together.
RWS brass getting ready for Narromine.
Cheers

Re: 280ai

Posted: Thu Jul 13, 2017 7:49 am
by jacksaligari
What gun are you doing the 280ai on

Re: 280ai

Posted: Thu Jul 13, 2017 10:02 am
by macca
Hi Jack,
Long action sleeved remington. LRP barrelled it for me. Showing some early promise but waiting for the cases to settle in. Was the 6.5x284 I used a few years back. Light gun.
Cheers

Re: 280ai

Posted: Thu Jul 13, 2017 10:24 am
by Seddo
I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.

Re: 280ai

Posted: Thu Jul 13, 2017 10:33 am
by 204 Hunter
My first 280 AI was made by Matt too, I started with a load of 53gn 09 for fireforming with 180 bergers and it shot so well I didn't change it.
My easiest barrel yet.
60:6 @ 1000 Belmont in a team shoot.
I always seem to shoot better in a team situation :roll:

Re: 280ai

Posted: Thu Jul 13, 2017 3:12 pm
by macca
204 Hunter wrote: Thu Jul 13, 2017 10:33 am My first 280 AI was made by Matt too, I started with a load of 53gn 09 for fireforming with 180 bergers and it shot so well I didn't change it.
My easiest barrel yet.
60:6 @ 1000 Belmont in a team shoot.
I always seem to shoot better in a team situation :roll:
That's good shooting at any range. Some people will work harder for the team because they hate letting others down. Not a bad thing in my book.
What speed did you get out of that load as a matter of interest?
Cheers

Re: 280ai

Posted: Thu Jul 13, 2017 6:24 pm
by mick_762
Seddo wrote: Thu Jul 13, 2017 10:24 am I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
Same for me with brass, I have 200 Norma brand new cases and RCBS dies for both SAAMI spec and non SAAMI spec chambers.
I really should start on this one. . . . Anyone know where a 7mm 1:9/1:10 is hiding?

Re: 280ai

Posted: Thu Jul 13, 2017 8:45 pm
by trevort
mick_762 wrote:
Seddo wrote: Thu Jul 13, 2017 10:24 am I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
Same for me with brass, I have 200 Norma brand new cases and RCBS dies for both SAAMI spec and non SAAMI spec chambers.
I really should start on this one. . . . Anyone know where a 7mm 1:9/1:10 is hiding?
Lilja would have a shitload of them. Just ask SeddoImage


Sent from my iPhone using Tapatalk

Re: 280ai

Posted: Thu Jul 13, 2017 8:47 pm
by mick_762
trevort wrote: Thu Jul 13, 2017 8:45 pm
mick_762 wrote:
Seddo wrote: Thu Jul 13, 2017 10:24 am I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
Same for me with brass, I have 200 Norma brand new cases and RCBS dies for both SAAMI spec and non SAAMI spec chambers.
I really should start on this one. . . . Anyone know where a 7mm 1:9/1:10 is hiding?
Lilja would have a shitload of them. Just ask SeddoImage


Sent from my iPhone using Tapatalk
Rhetorical questions aint ya strong suite are they haha. I know Seddo would be able to procure as many as I could pay for.

Re: 280ai

Posted: Thu Jul 13, 2017 11:03 pm
by trevort
So it wasn't really rhetorical was it. Was just incomplete. You left out the operative word 'cheap'




Sent from my iPhone using Tapatalk

Re: 280ai

Posted: Thu Jul 13, 2017 11:25 pm
by Seddo
I have an 8 twist sitting at Lukes. It was going to be a 7 rsaum to play with 183smk's but as i already have a 7rsaum barrel i can always make it a 280AI.

Re: 280ai

Posted: Fri Jul 14, 2017 6:59 am
by macca
Seddo wrote: Thu Jul 13, 2017 11:25 pm I have an 8 twist sitting at Lukes. It was going to be a 7 rsaum to play with 183smk's but as i already have a 7rsaum barrel i can always make it a 280AI.
Good enough reason to do it.
This is my first dedicated target barrel but the one's I used for hunting were over achievers. Not far behind the 7mm mag. Be interested in what you think of the 183's either way you decide to go.
Cheers

Re: 280ai

Posted: Tue Jul 18, 2017 7:47 pm
by 204 Hunter
macca wrote: Thu Jul 13, 2017 3:12 pm
204 Hunter wrote: Thu Jul 13, 2017 10:33 am My first 280 AI was made by Matt too, I started with a load of 53gn 09 for fireforming with 180 bergers and it shot so well I didn't change it.
My easiest barrel yet.
60:6 @ 1000 Belmont in a team shoot.
I always seem to shoot better in a team situation :roll:
That's good shooting at any range. Some people will work harder for the team because they hate letting others down. Not a bad thing in my book.
What speed did you get out of that load as a matter of interest?
Cheers
Hi Macca
The reason I shoot better in a team situation is that the coach does the wind reading:)
My pacnor barrel was getting around 2890 for 53gn of 09
Approach with caution.

Re: 280ai

Posted: Tue Jul 18, 2017 8:38 pm
by macca
Hi Macca
The reason I shoot better in a team situation is that the coach does the wind reading:)
My pacnor barrel was getting around 2890 for 53gn of 09
Approach with caution.
[/quote]

Fair enough re the wind reading. Thanks for load data.
Will probably run 168gr bergers in this one. Short barrel to make lg weight for 1k br.
Cheers