280ai

Discuss all aspects of Ammunition and Reloading here.
Post Reply
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

280ai

Post by macca »

2017-07-12 17.59.49.jpg
2017-07-12 17.59.49.jpg (70.07 KiB) Viewed 1208 times
I love it when a plan comes together.
RWS brass getting ready for Narromine.
Cheers
jacksaligari
.223 Remington
Posts: 448
Joined: Sun Nov 22, 2009 8:24 pm
Favourite Cartridge: 6br
Location: Central victoria

Re: 280ai

Post by jacksaligari »

What gun are you doing the 280ai on
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: 280ai

Post by macca »

Hi Jack,
Long action sleeved remington. LRP barrelled it for me. Showing some early promise but waiting for the cases to settle in. Was the 6.5x284 I used a few years back. Light gun.
Cheers
User avatar
Seddo
.338 Lapua Magnum
Posts: 2054
Joined: Sat Jan 03, 2009 9:17 am
Favourite Cartridge: Creedmoor
Location: Vic

Re: 280ai

Post by Seddo »

I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
204 Hunter
.17 HMR
Posts: 175
Joined: Tue Sep 20, 2016 12:37 pm
Favourite Cartridge: 204
Location: Branxton NSW

Re: 280ai

Post by 204 Hunter »

My first 280 AI was made by Matt too, I started with a load of 53gn 09 for fireforming with 180 bergers and it shot so well I didn't change it.
My easiest barrel yet.
60:6 @ 1000 Belmont in a team shoot.
I always seem to shoot better in a team situation :roll:
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: 280ai

Post by macca »

204 Hunter wrote: Thu Jul 13, 2017 10:33 am My first 280 AI was made by Matt too, I started with a load of 53gn 09 for fireforming with 180 bergers and it shot so well I didn't change it.
My easiest barrel yet.
60:6 @ 1000 Belmont in a team shoot.
I always seem to shoot better in a team situation :roll:
That's good shooting at any range. Some people will work harder for the team because they hate letting others down. Not a bad thing in my book.
What speed did you get out of that load as a matter of interest?
Cheers
User avatar
mick_762
50 BMG
Posts: 4156
Joined: Sun Mar 04, 2012 1:46 pm
Favourite Cartridge: 308 Norma
Location: Wodonga Vic

Re: 280ai

Post by mick_762 »

Seddo wrote: Thu Jul 13, 2017 10:24 am I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
Same for me with brass, I have 200 Norma brand new cases and RCBS dies for both SAAMI spec and non SAAMI spec chambers.
I really should start on this one. . . . Anyone know where a 7mm 1:9/1:10 is hiding?
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: 280ai

Post by trevort »

mick_762 wrote:
Seddo wrote: Thu Jul 13, 2017 10:24 am I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
Same for me with brass, I have 200 Norma brand new cases and RCBS dies for both SAAMI spec and non SAAMI spec chambers.
I really should start on this one. . . . Anyone know where a 7mm 1:9/1:10 is hiding?
Lilja would have a shitload of them. Just ask SeddoImage


Sent from my iPhone using Tapatalk
User avatar
mick_762
50 BMG
Posts: 4156
Joined: Sun Mar 04, 2012 1:46 pm
Favourite Cartridge: 308 Norma
Location: Wodonga Vic

Re: 280ai

Post by mick_762 »

trevort wrote: Thu Jul 13, 2017 8:45 pm
mick_762 wrote:
Seddo wrote: Thu Jul 13, 2017 10:24 am I had one and will have one again, i have some nosler brass sitting there so it keeps reminding me to get another barrel cur for them.
Same for me with brass, I have 200 Norma brand new cases and RCBS dies for both SAAMI spec and non SAAMI spec chambers.
I really should start on this one. . . . Anyone know where a 7mm 1:9/1:10 is hiding?
Lilja would have a shitload of them. Just ask SeddoImage


Sent from my iPhone using Tapatalk
Rhetorical questions aint ya strong suite are they haha. I know Seddo would be able to procure as many as I could pay for.
User avatar
trevort
Spud Gun
Posts: 12710
Joined: Thu Sep 14, 2006 9:21 pm
Favourite Cartridge: Tater
Location: Melbourne

Re: 280ai

Post by trevort »

So it wasn't really rhetorical was it. Was just incomplete. You left out the operative word 'cheap'




Sent from my iPhone using Tapatalk
User avatar
Seddo
.338 Lapua Magnum
Posts: 2054
Joined: Sat Jan 03, 2009 9:17 am
Favourite Cartridge: Creedmoor
Location: Vic

Re: 280ai

Post by Seddo »

I have an 8 twist sitting at Lukes. It was going to be a 7 rsaum to play with 183smk's but as i already have a 7rsaum barrel i can always make it a 280AI.
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: 280ai

Post by macca »

Seddo wrote: Thu Jul 13, 2017 11:25 pm I have an 8 twist sitting at Lukes. It was going to be a 7 rsaum to play with 183smk's but as i already have a 7rsaum barrel i can always make it a 280AI.
Good enough reason to do it.
This is my first dedicated target barrel but the one's I used for hunting were over achievers. Not far behind the 7mm mag. Be interested in what you think of the 183's either way you decide to go.
Cheers
204 Hunter
.17 HMR
Posts: 175
Joined: Tue Sep 20, 2016 12:37 pm
Favourite Cartridge: 204
Location: Branxton NSW

Re: 280ai

Post by 204 Hunter »

macca wrote: Thu Jul 13, 2017 3:12 pm
204 Hunter wrote: Thu Jul 13, 2017 10:33 am My first 280 AI was made by Matt too, I started with a load of 53gn 09 for fireforming with 180 bergers and it shot so well I didn't change it.
My easiest barrel yet.
60:6 @ 1000 Belmont in a team shoot.
I always seem to shoot better in a team situation :roll:
That's good shooting at any range. Some people will work harder for the team because they hate letting others down. Not a bad thing in my book.
What speed did you get out of that load as a matter of interest?
Cheers
Hi Macca
The reason I shoot better in a team situation is that the coach does the wind reading:)
My pacnor barrel was getting around 2890 for 53gn of 09
Approach with caution.
User avatar
macca
.338 Lapua Magnum
Posts: 2465
Joined: Wed Feb 21, 2007 7:46 pm
Favourite Cartridge: 308/6br
Location: Southern Highlands NSW

Re: 280ai

Post by macca »

Hi Macca
The reason I shoot better in a team situation is that the coach does the wind reading:)
My pacnor barrel was getting around 2890 for 53gn of 09
Approach with caution.
[/quote]

Fair enough re the wind reading. Thanks for load data.
Will probably run 168gr bergers in this one. Short barrel to make lg weight for 1k br.
Cheers
Post Reply