17PPC
Posted: Sun Mar 05, 2017 7:22 pm
I shot some 20gr 17PPC loads today.
25gr HP and 20gr BT
25gr HP and 20gr BT
Page 1 of 2
Re: 17PPC
Posted: Sun Mar 05, 2017 7:34 pm
So when are you going to stoke them up a bit
Re: 17PPC
Posted: Sun Mar 05, 2017 7:47 pm
Smokin' ! That is seriously quick!
Marcus
Marcus
Re: 17PPC
Posted: Sun Mar 05, 2017 8:16 pm
Next time mateMISSED wrote:So when are you going to stoke them up a bit
Bolt lift was fine on all but 1 of the 12 rounds I fired and it was one of the lighter loads so i can only think its due to a case variation. I'll meaasure up the cases and see how much more I can push them. There is room for more BM1 in the case. The shoulder is 0.010 further forward after firing so that could help as well.
Re: 17PPC
Posted: Sun Mar 05, 2017 8:18 pm
My starting load was 4700 even and I knew it was going to be fun after that.
Re: 17PPC
Posted: Sun Mar 05, 2017 8:36 pm
Nearly 4900 fps, man oh man are you gunna enjoy popping a few critters with that one. That is real motivation Scott.
Re: 17PPC
Posted: Sun Mar 05, 2017 8:38 pm
Can you just go out and shoot a critter with it and take a high speed video please.Seddo wrote:My starting load was 4700 even and I knew it was going to be fun after that.
Sent from my iPhone using Tapatalk Pro
Re: 17PPC
Posted: Sun Mar 05, 2017 9:14 pm
I havent shot critters in years but I had a chat to my brother tonight and I'll be taking this one out soon. Instant motivation right there. I think the 22 Cheetah will be in the same boat.
Re: 17PPC
Posted: Mon Mar 06, 2017 6:04 am
That is fast. I understand your need for speed. As a reloader and bullet swager I have some questions though,
In the pic with the seated projectiles; what is that bulge / ring just below the neck?
To get a .010" shoulder movement I gather that you were fire forming?
What is the practical range of the rifle?
Are all the projectiles holding together ?
How was the accuracy at that speed?
What were the PROJECTILE lengths?
Bill
In the pic with the seated projectiles; what is that bulge / ring just below the neck?
To get a .010" shoulder movement I gather that you were fire forming?
What is the practical range of the rifle?
Are all the projectiles holding together ?
How was the accuracy at that speed?
What were the PROJECTILE lengths?
Bill
Re: 17PPC
Posted: Mon Mar 06, 2017 9:53 am
billsshed wrote:That is fast. I understand your need for speed. As a reloader and bullet swager I have some questions though,
In the pic with the seated projectiles; what is that bulge / ring just below the neck? that was left after necking them down from 22 cal.
To get a .010" shoulder movement I gather that you were fire forming? YES
What is the practical range of the rifle? at 4800fps its supersonic for 700y but it wouldn't have much hit when it got there. At 300y it will be just under 3000fps
Are all the projectiles holding together ? All 12 made it to the target at 50m
How was the accuracy at that speed? i didnt shoot any groups, i was cleaning every 1-2 shots and using a rest with a 5" bag when teh stock has a 2.25" forend. the aim of the day was to see how much the cases formed and what velociy i coudl get. next time i will load a bigger spread and shoot groups
What were the PROJECTILE lengths? what ever they came out of the box at, i didnt measure them
Bill
Re: 17PPC
Posted: Tue Mar 07, 2017 7:19 am
Thanks for the info,
Let us know how it goes out in the paddock
Bill
Let us know how it goes out in the paddock
Bill
17PPC
Posted: Sat Mar 18, 2017 2:45 pm
This morning I loaded up the cases I used last time, a few of the primers pockets were on the loose side so the cases didnt like the charge input in them. I went up to 27.4gr this time but fell short of my target, the best one was 4985fps. So close, I'll have to try again, I can't live with being that close. I had 2 of each charge plus a few to discard as the first shot over the chrono. I had 2 go through the same hole at 100y doing 4916 and 4921fps, it's a shame the pressure is too high for the brass as it shows promise. I might have to try lapua brass, there was some reports that Norma brass can be a bit soft.
Re: 17PPC
Posted: Sat Mar 18, 2017 2:49 pm
I chronoed 3 rounds today
27.0gr - 4916 & 4921fps
27.2gr - 4950 & 4955fps
27.4gr - 4985 & 4955fps
The ES started to jump on the last one.
Sent from my iPad using Tapatalk
27.0gr - 4916 & 4921fps
27.2gr - 4950 & 4955fps
27.4gr - 4985 & 4955fps
The ES started to jump on the last one.
Sent from my iPad using Tapatalk
Re: 17PPC
Posted: Sat Mar 18, 2017 3:00 pm
I would definitely go to Lap brass
Re: 17PPC
Posted: Sat Mar 18, 2017 5:02 pm
You are getting some impressive speeds there Scott, pity you missed 5000, but as the old saying goes, If at first you don't succeed, try, try, try again.
Sako brass any stronger than Norma ??
Sako brass any stronger than Norma ??